Anritsu MT1000A Network Master Pro Manual de usuario
Document No.: M-W3811AE-4.0
Quick Reference Guide
MT1000A
Network Master Pro
OTDR Modules
Fourth Edition
Power button
Touch Screen display
Battery
• Additional safety and warning information is
provided within the “MT1000A Network Master Pro
OTDR Modules” Operation Manual.
• Please refer to that document before using the
equipment.
• Keep this manual with the equipment.
Contents
Panel.................................................................................. 1
Power................................................................................. 2
To Power Up............................................................................... 2
To Power Down .......................................................................... 3
Forced Power Down................................................................... 3
Toolbars ............................................................................. 4
Basic Screens and Navigation ........................................... 4
Standard OTDR (Optical Time Domain Reflectometer)
........... 6
Measurement condition setup .................................................... 6
Test setup................................................................................... 8
Measurement ........................................................................... 10
Fiber Visualizer ........................................................................ 11
Trace ........................................................................................ 13
FTTA (Fiber to the Antenna) ............................................. 17
Construction..................................................................... 18
OLTS (Optical Loss Test Set) ........................................... 21
File saving and loading .................................................... 27
Saving the file........................................................................... 27
Loading the file......................................................................... 27
Creating the report ........................................................... 29
Copying a file ................................................................... 31
Copyright © 2015-2018, ANRITSU CORPORATION
All rights reserved. No part of this manual may be reproduced without the
prior written permission of the publisher.
The contents of this manual may be changed without prior notice.
1
Panel
MU100021A panel is shown below. MU100020A and MU100022A do not
have the OTDR/OLS (0.85/1.3 m) connector.
*: OTDR/OLS (1.31/1.55/1.625 m) is printed on MU100022A.
VFL: Visual Fault Locator (Option 002)
Visible red light is output.
OPM: Optical Power Meter
Input port for the power measurement. 1.25 mmor
2.5mmferrule can be connected by using the supplied
Universal Connectors.
Universal Connector
OTDR/OLS: Optical Time Domain Reflectometer / Optical Light Source
Port for the OTDR measurement and light source output.
SMF (Single mode fiber) OTDR/OLS connector depends on the
option:
•Option 010: UPC Connector
•Option 011: APC Connector
*
2
Power
Power button indication shows the following status.
Gray: Power off
Orange flashing (fast): Booting on AC power
Green flashing: Booting on battery
Orange flashing (slow): Charging
Orange: Stand by
Green: Operating
To Power Up
AC Operation
Connect the AC adaptor to the Network Master. The power button
flashes in orange during booting and remains on after booting.
Press the power button to light it up in green. After a model name is
displayed, the Network Master enters Operating status and the
Application Selector appears.
Figure 1 Application Selector
3
Battery Operation
Press the power button. The Network Master shows a model name and
flashes the power button in green during booting.
Then, the Network Master enters Operating status and shows the
Application Selector.
To Power Down
When you press the Power button, a pop-up menu containing Shut Down
will appear.
Touch Shut Down and then confirm by touching Yes in a dialog box.
AC Operation
After you shut the Network Master down, the Network Master stays
Stand by or charging state until you disconnect the AC adapter.
Battery Operation
After you shut the Network Master down, the power goes off.
Forced Power Down
If it is not possible to power down the Network Master using the power
button menu, the following procedure can be used to make an emergency
power down.
1. Disconnect AC adapter if it is connected.
2. Hold the Power button depressed for a couple of seconds.
4
Toolbars
General functionalities such as start/stop of test, creation of the report,
displaying the help etc. are placed in expandable toolbars.
Application toolbar Instrument toolbar
Start Averaging Instrument information
Stop the measurement Network setting and
General settings (ex.
Date, Language)
Start Realtime*1
Skip a measurement*2File manager
Accept the result*2Displays Help
Create a report Resource monitoring
Displays Help
Save a file
Load a file
Close the application
*1: Appears on Standard OTDR and FTTA application.
*2: Appears on Construction application.
Basic Screens and Navigation
You can navigate freely both horizontally and vertically between the
various screens, as shown in the figure in next page. Set the
measurement conditions on the Setup screen, and configure the test
setups on the Test screen. Touching the Start Averaging or Start Realtime
on the Application toolbar will display the Result screen.
5
Application Selector screen Result Files Browser screen
Setup screen Test screen Result screen
”Navigation
area”
6
Standard OTDR (Optical Time Domain Reflectometer)
To locate where the reflection happens, and measure the
fiber loss, touch Standard OTDR in the Application selector.
Measurement condition setup
1. To display the Setup screen, touch SETUP at the bottom of the
screen.
2. For MU100021A, touch Port in the navigation area.
Set Output Port to Single Mode or Multi Mode.
3. Touch Measurement in the navigation area.
If selecting Auto, the parameters will be set automatically.
Selecting Manual allows user to set parameters.
Select Wavelength used for the measurement.
4. Touch IOR/BSC. Set IOR, BSC, and Fiber Type.
5. Touch Header. Set each items if you need. These items are saved to
the file. The following items will be printed on the report:
Cable ID, Fiber ID, Location A, Location B, and Operator.
6. Touch Preference. Set each item if you need.
7
Connection Check: If selecting the check box, confirms whether or
not the fiber is connected correctly to the OTDR measurement port.
Active Fiber Check: If selecting the check box, performs a "live
fiber" check on the currently attached fiber under test to detect
whether the fiber is carrying traffic before firing any OTDR laser
sources.
Note:
The Active Fiber Check feature does not apply for the 850/1300
nm multimode fiber.
8
Test setup
1. To display the Test screen, touch TEST at the bottom of the screen.
2. Touch Fiber in the navigation area. Set the length of the patch code
connecting to the fiber under the test. If Output port is set to Single
Mode, set the splitter configuration.
Otros manuales para MT1000A Network Master Pro
11
Tabla de contenidos
Otros manuales de Equipo de prueba de Anritsu
Anritsu
Anritsu MT1000A Network Master Pro Manual de usuario
Anritsu
Anritsu MT1000A Network Master Pro Manual de usuario
Anritsu
Anritsu MD8470A Hoja de especificaciones
Anritsu
Anritsu VectorStar MN469 C Series Manual de usuario
Anritsu
Anritsu MP1800A Manual de usuario
Anritsu
Anritsu MG369 A Series Manual de usuario
Anritsu
Anritsu MG3681A Manual de usuario
Anritsu
Anritsu MN469xC Series Manual de usuario
Anritsu
Anritsu MN469xC Series Manual de usuario
Anritsu
Anritsu MT8852B Manual del propietario
Anritsu
Anritsu MS8911A Manual de usuario
Anritsu
Anritsu LMR Master S412E Manual del propietario
Anritsu
Anritsu 3659 Manual de usuario
Anritsu
Anritsu MP1590B Manual de usuario
Anritsu
Anritsu 691 B Series Manual de usuario
Anritsu
Anritsu MT8852A Manual de usuario
Anritsu
Anritsu MT9810B Manual de usuario
Anritsu
Anritsu Precision AutoCal 36585 Series Manual de usuario
Anritsu
Anritsu MP1590B-30 Manual de usuario
Anritsu
Anritsu MT9812B Manual de usuario
Manuales populares de Equipo de prueba de otras marcas
SMART
SMART KANAAD SBT XTREME 3G Series Manual de usuario
Agilent Technologies
Agilent Technologies BERT Serial Manual de usuario
Agilent Technologies
Agilent Technologies N3280A Manual de usuario
Vernier
Vernier Go Direct Voltage Manual de usuario
Lifeloc
Lifeloc R.A.D.A.R. Manual de usuario
Fluke
Fluke T5-600 Instrucciones de funcionamiento e instalación
