Anritsu Sire Master S331D Manual de usuario
User Guide
Site Masterä
S331D
Cable and Antenna Analyzer
Anritsu Company PN: 10580-00079
490 Jarvis Drive Revision: K
Morgan Hill, CA 95037-2809 Published: April 2009
USA Copyright ã2003-2009 Anritsu Co.
WARRANTY
The Anritsu product(s) listed on the title page is (are) warranted against defects in
materials and workmanship for one year from the date of shipment.
Anritsu's obligation covers repairing or replacing products which prove to be defec-
tive during the warranty period. Buyers shall prepay transportation charges for
equipment returned to Anritsu for warranty repairs. Obligation is limited to the origi-
nal purchaser. Anritsu is not liable for consequential damages.
LIMITATION OF WARRANTY
The foregoing warranty does not apply to Anritsu connectors that have failed due to
normal wear. Also, the warranty does not apply to defects resulting from improper or
inadequate maintenance by the Buyer, unauthorized modification or misuse, or op-
eration outside the environmental specifications of the product. No other warranty is
expressed or implied, and the remedies provided herein are the Buyer's sole and
exclusive remedies.
TRADEMARK ACKNOWLEDGMENTS
Windows, Windows 95, Windows NT, Windows 98, Windows 2000, Windows ME,
Windows XP, Windows VISTA, and .NET are registered trademarks of the Microsoft
Corporation.
Anritsu, FlexCal, InstaCal and Site Master are trademarks of Anritsu Company.
NOTICE
Anritsu Company has prepared this manual for use by Anritsu Company personnel
and customers as a guide for the proper installation, operation and maintenance of
Anritsu Company equipment and computer programs. The drawings, specifications,
and information contained herein are the property of Anritsu Company, and any un-
authorized use or disclosure of these drawings, specifications, and information is
prohibited; they shall not be reproduced, copied, or used in whole or in part as the
basis for manufacture or sale of the equipment or software programs without the
prior written consent of Anritsu Company.
UPDATES
Updates to this manual, if any, may be downloaded from the Anritsu Internet site at:
http://www.us.anritsu.com
Anritsu contact information can be accessed from the following Internet site:
http://www.anritsu.com/Contact.asp
S331D, MS2711D
ѻકЁ᳝↦᳝ᆇ⠽䋼ܗ㋴ⱘৡ⿄ঞ䞣
᳝↦᳝ᆇ⠽䋼ܗ㋴䚼ӊৡ⿄
䪙
3E
∲
+J
䬝
&G
݁Ӌ䫀
>&UĎ@
⒈㘨㣃
3%%
⒈Ѡ㣃䝮
3%'(
ࠋ㒓䏃ᵓ
3&$
h
ƻ
hhƻƻ
ᴎǃᬃᶊ
&KDVVLV
h
ƻhhƻƻ
/&'hhhhƻƻ
݊Ҫ˄⬉㓚ǃ亢ǃ
䖲఼ㄝ˅
$SSHQGHGJRRGV
hƻhhƻƻ
ƻ˖㸼⼎䆹᳝↦᳝ᆇ⠽䋼䆹䚼ӊ᠔᳝ഛ䋼ᴤ᭭Ёⱘ䞣ഛ 6-7 ޚ㾘
ᅮⱘ䰤䞣㽕∖ҹϟDŽ
h˖㸼⼎䆹᳝↦᳝ᆇ⠽䋼㟇ᇥ䆹䚼ӊⱘᶤϔഛ䋼ᴤ᭭Ёⱘ䞣䍙ߎ 6-7
ޚ㾘ᅮⱘ䰤䞣㽕∖DŽ
⦃ֱՓ⫼ᳳ䰤
䖭Ͼ䆄ᰃḍ ݀ᏗⱘNj⬉ᄤֵᙃѻક∵ᶧࠊㅵ⧚ࡲ⊩njҹঞ
6-7Nj⬉ᄤֵᙃѻક∵ᶧࠊ䆚㽕∖njⱘ㾘ᅮˈ䗖⫼ѢЁ
䫔ଂⱘ⬉ᄤֵᙃѻકⱘ⦃ֱՓ⫼ᳳ䰤DŽҙ䰤Ѣ䙉ᅜ䆹ѻકⱘᅝܼ㾘㣗ঞՓ⫼
⊼ᛣџ乍ⱘ⸔ϞˈҢ⫳ѻ᮹䍋ㅫⱘ䆹ᑈ䰤ݙˈϡӮѻક᠔᳝ᆇ⠽䋼ⱘ⊘
ⓣさথᗻবᓖˈ㗠ᇍ⦃๗∵ᶧˈҎ䑿ঞ䋶ѻѻ⫳⏅ࠏഄᕅડDŽ
⊼˅⬉∴ⱘ⦃ֱՓ⫼ᳳ䰤ᰃ ᑈDŽ⫳ѻ᮹ᳳѢѻકᑣোⱘࠡಯⷕ
བ 61;;;;
Ў
ᑈ ⫳ѻDŽ
For Chinese Customers Only YLYB
Equipment marked with the Crossed-out Wheelie
Bin symbol complies with the European
Parliament and Council Directive 2002/96/EC (the
“WEEE Directive”) in European Union.the
For Products placed on the EU market after
August 13, 2005, please contact your local Anritsu
representative at the end of the product's useful
life to arrange disposal in accordance with your
initial contract and the local law.
Table of Contents
Chapter 1
General Information
Introduction ..................................1-1
Description ...................................1-1
Standard Accessories .............................1-2
Options .....................................1-2
External Detectors ...............................1-3
Optional Accessories..............................1-4
Performance Specifications ..........................1-7
Preventive Maintenance ...........................1-10
Calibration ..................................1-10
InstaCal Module ..............................1-11
Annual Verification..............................1-11
ESD Precautions ...............................1-11
Anritsu Service Centers............................1-11
Mode References ...............................1-11
Chapter 2
Functions and Operations
Introduction ..................................2-1
Test Connector Panel .............................2-1
Display Overview ...............................2-3
Front Panel Overview .............................2-4
Function Hard Keys ..............................2-5
Keypad Hard Keys ...............................2-6
Soft Keys....................................2-8
Power Monitor, External Detector (Option 5) ................2-16
Symbols....................................2-17
Self Test ...................................2-18
Error Messages ................................2-19
Battery Information..............................2-23
Charging a New Battery ..........................2-23
Determining Remaining Battery Life....................2-24
Important Battery Information .......................2-26
i
Chapter 3
Getting Started
Introduction ..................................3-1
Power On Procedure .............................3-1
Cable and Antenna Analyzer Mode ......................3-2
All Modes...................................3-10
Save and Recall a Setup ..........................3-10
Save and Recall a Display .........................3-10
Changing the Units .............................3-11
Changing the Language...........................3-11
Adjusting Markers .............................3-11
Adjusting Limits ..............................3-12
Adjusting the Display Brightness......................3-13
Printing ....................................3-14
Using the Soft Carrying Case.........................3-15
Chapter 4
Cable and Antenna
Analyzer Measurements
Introduction ..................................4-1
Line Sweep Fundamentals ...........................4-1
CW Mode/RF Immunity ...........................4-3
Information Required for a Line Sweep ...................4-3
Typical Line Sweep Test Procedures ....................4-3
Chapter 5
Power Monitor Mode
Introduction ..................................5-1
Power Measurement ..............................5-1
Chapter 6
High Accuracy Power Meter
Introduction ..................................6-1
Units and Relative Power ..........................6-1
Limit Lines ..................................6-1
Connecting the Sensor ............................6-1
Zeroing the Sensor ..............................6-2
Using Attenuators ..............................6-2
Power Measurement ..............................6-2
ii
Chapter 7
Handheld Software Tools
Introduction ..................................7-1
Features ....................................7-1
System Requirements .............................7-2
Installation ...................................7-2
Using Handheld Software Tools ........................7-5
Downloading Traces .............................7-5
Plot Capture to the PC ............................7-5
Plot Upload to the Instrument ........................7-5
Plot Properties ................................7-6
Signal Standards Editor...........................7-11
Chapter 8
Master Software Tools
Introduction ..................................8-1
Key Features of Master Software Tools ....................8-1
Minimum System Requirements........................8-4
Appendix A
Windowing
Introduction .................................A-1
Examples ..................................A-1
iii
Chapter 1
General Information
Introduction
This chapter provides a description, performance specifications, optional accessories,
preventive maintenance, and calibration requirements for the Site Master™ model S331D.
Throughout this manual, the term Site Master will refer to the S331D.
Model Frequency Range
S331D Cable and Antenna Analyzer Mode: 25 to 4000 MHz
Description
The Site Master is a handheld cable and antenna analyzer designed for installers,
contractors, and wireless service providers who need a portable and rugged cable and
antenna analyzer.
It is designed for measuring Return Loss, VSWR, Cable Loss, of cable and antenna systems
from 25 MHz to 4 GHz. Integrated Distance-To-Fault measurement can be used to locate
the precise location of a fault within the feedline system. Options available with the S331D
include High Accuracy Power Meter (Option 19) and Power Monitor (Option 5).
The Site Master is capable of up to 1.5 hours of continuous operation from a fully charged
field-replaceble battery and can be operated from a 12.5 Vdc source. Built-in energy con-
servation features can be used to extend the battery life.
A standard 640*480 color TFT display provide graphic indications of various measure-
ments. The displayed trace can be scaled or enhanced with frequency markers and limit
lines. A menu option provides for an audible "beep" when the limit value is exceeded.
1-1
Standard Accessories
The Handheld Software Tools and Master Software Tools PC-based software programs
provide a database record for storing measurement data. Software Tools can also convert
the Site Master display to a Microsoft Windowsäworkstation graphic. Measurements
stored in the Site Master internal memory can be downloaded to the PC using the included
null-modem serial cable. Once stored, the graphic trace can be displayed, scaled, or en-
hanced with markers and limit lines. Historical graphs can be overlaid with current data,
and underlying data can be extracted and used in spreadsheets or for other analytical tasks.
The Handheld Software Tools program can display measurements made with the Site
Master (SWR, return loss, cable loss, distance-to-fault) as well as providing other functions,
such as converting display modes and Smith charts. Refer to Chapter 7, Handheld Software
Tools, for more information.
The following items are supplied with the basic hardware:
·65717 Soft Carrying Case
·633-27 Rechargeable Battery, Ni-MH
·40-168-R AC–DC Adapter
·806-141 Automotive Cigarette Lighter 12 Volt DC Adapter
·2300-347 Handheld Software Tools CDROM
·800-441 Serial Interface Cable (null modem type)
·551-1691-R USB to RS-232 Adapter Cable
·10580-00079 S331D Site Master User's Guide
·One-Year Warranty
Options
·Option 5 Power Monitor - Requires external detector
·Option 19 High Accuracy Power Meter (sensor not included)
1-2
Chapter 1 General Information
Tabla de contenidos
Otros manuales de Instrumento de medición de Anritsu
Anritsu
Anritsu MS2690A Manual de usuario
Anritsu
Anritsu MS2711B Manual de usuario
Anritsu
Anritsu MP2100A BERTWave Manual de usuario
Anritsu
Anritsu Site Master S332D Manual de usuario
Anritsu
Anritsu SM/PL Series Manual de uso y cuidado
Anritsu
Anritsu AM-9000 Series Manual de usuario
Anritsu
Anritsu MS2720 A Series Manual de usuario
Anritsu
Anritsu MT8802A Manual de usuario
Anritsu
Anritsu Site Master Manual de usuario
Anritsu
Anritsu MS2691A Manual de usuario
Anritsu
Anritsu MU104014B Manual de usuario
Anritsu
Anritsu Field Master Pro MS2090A Manual de usuario
Anritsu
Anritsu Site Master S331L Manual del propietario
Anritsu
Anritsu Spectrum Master Manual de usuario
Anritsu
Anritsu Field Master Pro MS2090A Manual de usuario
Anritsu
Anritsu Series MS278XB Manual de usuario
Anritsu
Anritsu PIM Master MW82119A Manual de usuario
Anritsu
Anritsu MP1220A Manual de usuario
Anritsu
Anritsu MS2690A Manual de usuario
Anritsu
Anritsu MS462 Series Manual de usuario
Manuales populares de Instrumento de medición de otras marcas
Endress+Hauser
Endress+Hauser Proline Promag 50 Especificaciones técnicas
Siemens
Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas
KLINGER
KLINGER CMF V Series Manual de usuario
EXFO
EXFO FTB-2 Manual de operación y mantenimiento
Keysight
Keysight M8290A Manual de usuario
ADTEK
ADTEK MW-5 Manual de usuario