Agilent Technologies 85025A Manual

User’s and Service Guide

Agilent Technologies

85025A/B/D/E

Detectors

Manufacturing Part Number: 85025-90063

Supersedes 85025-90014 & 85025-90031

Printed in USA

Print Date: January 2013

Supersedes September 2002

Hewlett-Packard to Agilent Technologies Transition

This manual may contain references to HP or Hewlett-Packard. Please note that

Hewlett-Packard's former test and measurement, semiconductor products and chemical analysis

businesses are now part of Agilent Technologies. To reduce potential confusion, the only

change to product numbers and names has been in the company name prefix: where a product

number/name was HP XXXX the current name/number is now Agilent XXXX. For example,

model number HP 85109C is now model number Agilent 85109C.

Documentation Warranty

THE MATERIAL CONTAINED IN THIS DOCUMENT IS PROVIDED "AS IS," AND IS SUBJECT TO BEING

CHANGED, WITHOUT NOTICE, IN FUTURE EDITIONS. FURTHER, TO THE MAXIMUM EXTENT PERMITTED

BY APPLICABLE LAW, AGILENT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED WITH

REGARD TO THIS MANUAL AND ANY INFORMATION CONTAINED HEREIN, INCLUDING BUT NOT LIMITED

TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. AGI-

LENT SHALL NOT BE LIABLE FOR ERRORS OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CON-

NECTION WITH THE FURNISHING, USE, OR PERFORMANCE OF THIS DOCUMENT OR ANY INFORMATION

CONTAINED HEREIN. SHOULD AGILENT AND THE USER HAVE A SEPARATE WRITTEN AGREEMENT WITH

WARRANTY TERMS COVERING THE MATERIAL IN THIS DOCUMENT THAT CONFLICT WITH THESE

TERMS, THE WARRANTY TERMS IN THE SEPARATE AGREEMENT WILL CONTROL.

DFARS/Restricted Rights Notice

If software is for use in the performance of a U.S. Government prime contract or subcontract, Software is

delivered and licensed as “Commercial computer software” as defined in DFAR 252.227-7014 (June 1995),

or as a “commercial item” as defined in FAR 2.101(a) or as “Restricted computer software” as defined in

FAR 52.227-19 (June 1987) or any equivalent agency regulation or contract clause. Use, duplication or

disclosure of Software is subject to Agilent Technologies’ standard commercial license terms, and non-DOD

Departments and Agencies of the U.S. Government will receive no greater than Restricted Rights as defined

in FAR 52.227-19(c)(1-2) (June 1987). U.S. Government users will receive no greater than Limited Rights as

defined in FAR 52.227-14 (June 1987) or DFAR 252.227-7015 (b)(2) (November 1995), as applicable in any

technical data.

Printing Copies of Documentation from the Web

To print copies of documentation from the Web, download the PDF file from the Agilent web site:

• Go to http://www.agilent.com.

• Enter the document’s part number (located on the title page) in the Search box.

•ClickSearch.

• Click on the hyperlink for the document.

• Click the printer icon located in the tool bar.

Contacting Agilent

Assistance with test and measurement needs and information on finding a local Agilent office are available

on the Web at:

http://www.agilent.com/find/assist

If you do not have access to the Internet, please contact your Agilent field engineer.

NOTE In any correspondence or telephone conversation, refer to the Agilent product by its model

number and full serial number. With this information, the Agilent representative can

determine whether your product is still within its warranty period.

Safety Notes

The following safety notes are used throughout this manual. F

amiliarize

yourself with each of the notes and its meaning before operating this

instrument.

Caution

Caution denotes a hazard. It calls attention to a procedure

that, if not correctly performed or adhered to, would result in

damage to or destruction of the instrument. Do not proceed

beyond a caution sign until the indicated conditions are fully

understood and met.

The instruction documentation symbol. The product is marked with

this symbol when it is necessary for the user to refer to the instructions in the

documentation.

How to Use This Guide

This guide uses the following conventions:

Front-Panel Key

This represents a key physically located on the instrument.

NNNNNNNNNNNNNNNNNNNNNNN

Softkey

This indicates a \softkey," a key whose label is determined by

the instrument's rmware.

Screen Text

This indicates text displayed on the instrument's screen.

Docu entation Description

This manual contains information on operating, testing, and servicing the

Agilent 85025A/B/D/E detectors.

Contents

1. General Information

Product Description . . . . . . . . . . . . . . . . . . . . . . -

Specications and Supplemental Characteristics . . . . . . . . . -3

Operating Environment . . . . ....... . . . . . . . . . -9

Accessories ......................... -9

Storage and Shipment . ... . . . . . . . . . . . . . . . . . -9

Environment . .. . . . . . . . . . . . . . . . . . . . . . -9

Packaging ..........................- 0

Returning a Detector for Service . . . . . . . . . . . . . . . . - 0

2. Installation

Initial Inspection . . . . . . . . . . . . . . . . . . ... . . . 2-

Electrostatic Discharge (ESD) . . . . . . . . . . . . . . . . . . 2-2

Static-Safe Work Station . . . . . . . . . . . . . . . . . .. 2-2

Static-Safe Practices . . . . . . . . . . . . . . . . . . . .. 2-3

Power Requirements . . . . . . . . . . .. .. . . . . . . . . 2-3

Mating Connectors . . . . . . . . . ......... . . . . . 2-3

Connecting the Detector . . . . . . . . .... .. .. . . . . 2-3

3. Operation

Features . . . ......... . . . . . . . . . . . . . . . 3-2

Operating Theory . . . ......... . . . . . . . . . . . 3-2

Measurement System Conguration .. .. .. .. .. .. .. .3-3

DC Detection mode . .. .. .. .. .. .. .. .. .. .. 3-3

Accurate DC Measurements . ................. 3-3

Zeroing the Detector . . . . . . . . . . . . .... .. .. . 3-3

Autozero ......................... 3-3

Manual Zero . . . . . . . . . . . . . . .......... 3-4

AC Detection Measurements .... .. .. .. .. ...... 3-6

Operator's Check ...................... . 3-6

Procedure . .. .. .. .. .. .. .. .. .. . .. .. .. 3-7

If the Operator's Check Fails ................. 3-8

Agilent 85025A/B/D/E Contents-1

4. Performance Tests

Equipment Required . .... .. .. .. .. .. ...

.. 4-

Return Loss P

erformance Test ................ .4-3

85025A/B/D/E Return Loss Performance Test Procedure . . . . 4-3

Specications . . ................. .. .. 4-3

Description . . . . . . . . . . . . . . . ..

... . . 4-3

Return Loss Measurement . . . . . . . . . . . . . .... 4-6

Calibrating the Scalar Network Analyzer . . . . . . . . . . 4-7

Return Loss from 40 MHz to 8 GHz (to 26.5 GHz for 85025B/E

only, to 50 GHz for 85025D only) . . . . . . . . . . ...4-7

If This Test Fails . . . . . . . . . . . . . .... . . . . . . 4-9

Frequency Response Performance Test . . . . . . . . . . . . . 4-9

Description . . . . . . . . . . . . . . . . ....... . . 4-9

Equipment Required . . . . . . . . . . . . . . . ...... 4-

Equipment Common to 85025A/B/D/E . . . . . . . . . . . . 4-

Additional Test Equipment Required for 85025A . . . .... 4-

Additional Test Equipment Required for 85025A Option 00 .4-

Additional Test Equipment Required for 85025B . . . . . ...4-

Additional Test Equipment Required for 85025D Only . . . . 4-

Additional Test Equipment Required for 85025E Only . . . . 4- 2

Specications . . . . . . . . . . . . . ... . . . . . . . . 4- 3

85025A/B/D/E Frequency Response Performance Test Procedure 4- 3

Conguring the System . . . . ... . . . . . . . . . . . . 4- 3

Characterizing the Source . . . . ..... . . . . . . . . 4- 4

Characterizing the Detector . . . . .... . . . . . . . . 4- 4

Computing the Maximum Error . ......... . . . . . 4- 4

Power Accuracy Performance Test . . . . . . . . . . . . . . . 4- 5

Specications ..... . . . . . . . . . . . . . . . . . . . 4- 5

Description .... ..................... 4- 5

Equipment Required . .... . . . . . . . . . . . . . . . 4- 6

Procedure .... .. .. .. .. .. .. .. .. .. ....4- 7

Absolute Power Accuracy in DC Mode Performance Test . . . 4- 7

Dynamic Accuracy in AC Mode Performance Test .. .... . 4-20

Power Accuracy, Alternate Procedure Using an 8350B (+ 0 dBm

maximum) . . .... .. .. .. .. .. .. .. .. . .. 4-2

Alternate Equipment . ................... 4-2

Procedure . . . ....................... 4-22

Absolute Power Accuracy in DC Mode, Alternate Procedure .. 4-23

Dynamic Accuracy in AC Mode, Alternate Procedure . . . . . . 4-24

Performance Test Record . . . . . . . . . . .......... 4-25

Contents-2 Agilent 85025A/B/D/E

5. Adjustments

6. Replaceable P

arts

How To Order Parts Fast . . . . . . . . . . .. .. .. .. . . 6-

7. Service

Repair . . . . . . . . . . . . . . . .... .. .. .. . . . 7-2

Removing the Covers . . . . . . . . . . . . . ..

... 7-2

Procedure . . . . . . . . . . . . . . . ..

...... .. 7-2

Replacing the Detector . . . . . . . . . . . .... .. .. . 7-3

Replacing the Cable Assembly . . . . . . . . . . . . . . . . 7-3

Replacing the Connectors . . . . . . . . . . . . . . . . . . 7-5

8. Detector Maintenance

Mechanical Inspection . . . . . . . ......... . . . . . 8-

Inspecting the Connectors . . . . . . . . .... . . . . . . 8-

Visual Examination . . . . . . . . . ..... . . . . . . . 8-2

Cleaning the Connectors . . . . . . . . . . ... . . . . . . . 8-2

Connector Cleaning Kit . . . . . . . . . . ... . . . . . . 8-2

Gaging Connectors . . . . . . . . . . . . .. . . . . . . . . . 8-2

Gaging Connectors to be Mated with the 85025A/B/D/E . . . . 8-3

Type-N female . . . . . ... . . . . . . . . . . . . . . . 8-3

Precision 7 mm . . . . ... . . . . . . . . . . . . . . . 8-3

Precision 3.5 mm female . . . ..... . . . . . . . . . . 8-3

9. Automated Program Listing

Automating the Frequency Response Test . . . . . . . . . . . . 9-

Cal Factor Entry Program . . . . . . . . . . . . . . . . . . 9-2

Running the Cal Factor Entry Program . . . . . . . . . . . 9-2

Detector Frequency Response Program . ... . . . . . . . . 9-3

Running the Detector Frequency Response Program . . . . . 9-3

Measurement Setup . . . . . . . . . . . . .. .. .. .. .. 9-5

Example Programs . . . . . . . . . . . . ... . . . . . . . . 9-5

Index

Agilent 85025A/B/D/E Contents-3

Figures

- . 85025A/B/D/E Detector . . ................. -2

2- . Example of a Static-Safe W

ork Station . . . . . . . . . . . . 2-2

3- . Detector Features ..

. . . . . . . . . . . . . . . . . . . . 3-2

3-2. Typical System Setup for 0.0 to 50 GHz Measurements . . . . 3-5

3-3. Operator's Check Equipment Setup . ............. 3-7

4- . Setup for 85025A/B/D/E Return Loss Test ........... 4-6

4-2. 85025A/B/E Return Loss 0.04 GHz to Maximum Frequency . . . 4-8

4-3. Frequency Response Measurement Setup . ... . . . . . . . 4- 2

4-4. Absolute Power Accuracy Test Setup . . . . . . . . . . . . . 4- 7

4-5. Power Accuracy Alternate Test Setup . . . . . . . . . . . . . 4-22

6- . Module Exchange Program . . . . . . . . . . . . . . . . . . 6-3

7- . Removing the Detector Covers . . . . . . . . . . . . . . . . 7-2

7-2. Cable Connections . . . . . . . . . . . . . . . . . . . . . . 7-5

9- . Typical Program Output . . . . . . . . . . . . . . . . . . . 9-4

Contents-4 Agilent 85025A/B/D/E

Tables

- . 85025 Series Detector Descriptions . . . . . . . . . . . . . . -

-2. 85025A/B/D/E Detector General Specications . . . . . . . . . -3

-3. 85025A Detector Specications (including Option 00 ) . . . . . -4

-4. 85025B Detector Specications . . .... .. . . . . . . . . -5

-5. 85025D Detector Specications . . ....... . . . . . . . -6

-6. 85025E Detector Specications ... . . . . . . . . . . . . . -7

-7. 85025A/B/D/E Detector Supplemental Characteristics . . . . . -8

3- . Equipment Required for Operator's Check . . . . . . . . . . . 3-6

4- . Recommended Equipment . . . . . . . . . . . . . . . . . . 4-2

4-2. 85025A/B Return Loss with Measurement Uncertainty . . . . . 4-5

4-3. 85025D Return Loss with Measurement Uncertainty . . . . . . 4-5

4-4. 85025E Return Loss with Measurement Uncertainty . . . . . . 4-5

4-5. Approximate Error Analysis at 8 GHz for 85025A/B/E Detectors 4- 0

4-6. Approximate Error Analysis for the 85025D Detector . . . . . 4- 0

6- . 85025A/B/D/E Replaceable Parts and Accessories . . . . . . . 6-2

Agilent 85025A/B/D/E Contents-5

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Sensor de seguridad de Agilent Technologies

Agilent Technologies

Agilent Technologies 355 SCD Manual de usuario

Agilent Technologies

Agilent Technologies 5975 Series Manual

Agilent Technologies

Agilent Technologies VS C15 Series Guía

Agilent Technologies

Agilent Technologies 1100 Series Manual de usuario

Agilent Technologies

Agilent Technologies G1563A Manual de usuario

Agilent Technologies

Agilent Technologies 1100 Series Manual de usuario

Agilent Technologies

Agilent Technologies 1260 Infinity Manual de usuario

Agilent Technologies

Agilent Technologies 1260 Infinity Manual de usuario

Agilent Technologies

Agilent Technologies 85037A Manual de servicio

Agilent Technologies

Agilent Technologies VS Series Manual de usuario

Agilent Technologies

Agilent Technologies 5973N Manual

Agilent Technologies

Agilent Technologies 8480 Series Manual de servicio

Agilent Technologies

Agilent Technologies 1200 series Manual de usuario

Agilent Technologies

Agilent Technologies PHD-4 Manual de usuario

Agilent Technologies

Agilent Technologies G3485A Manual de usuario

Agilent Technologies

Agilent Technologies 1200 Infinity Series Manual de usuario

Agilent Technologies

Agilent Technologies 1100 Series Manual de usuario

Agilent Technologies

Agilent Technologies G2334A Manual de usuario

Agilent Technologies

Agilent Technologies G3437A Manual de usuario

Agilent Technologies

Agilent Technologies G1314B VWD Manual de usuario

Agilent Technologies

Agilent Technologies 1260 Infinity Manual de usuario

Agilent Technologies

Agilent Technologies G8610 Series Manual de usuario

Agilent Technologies

Agilent Technologies G3388A Manual de usuario

Agilent Technologies

Agilent Technologies 1260 Infinity II Manual de usuario

Manuales populares de Sensor de seguridad de otras marcas

THORLABS

THORLABS PDA10JT Manual de usuario

Waeco

Waeco UV-DETECT Manual de usuario

Intermatic

Intermatic IOS-DSIMF Manual de usuario

urmet domus

urmet domus 1083 Manual de usuario

Siemens

Siemens AZL66 Series Manual de usuario

BTI

BTI Profiline Multi Finder Manual de usuario

Challenger

Challenger SL01 Manual de usuario

DMP Electronics

DMP Electronics 1122INT Manual de usuario

Rielta

Rielta Ladoga MK-RK Manual de usuario

Mirion Technologies

Mirion Technologies ACCURAD PRD Manual de usuario

Bosch

Bosch DS835 Manual de usuario

DBI SALA

DBI SALA EZ Stop Manual del operador

Lamptime

Lamptime ST05C Manual de usuario

Ubiquiti

Ubiquiti MFI-MSC Manual de usuario

Subsite

Subsite 910R Instrucciones de instalación

Satel

Satel OPAL Pro Manual de usuario

Aleph

Aleph XC-1XTEU Manual de usuario

Pima

Pima LARIS QUAD Manual de usuario