Agilent Technologies G8610 Series Guía de referencia

Agilent Technologies Helium Leak Detector

G8610, G8611, and G8612 Series Quick Reference Card

Manual Number G8610-90000, Rev. C

November 2017

Start Up (Manual Section 1.3.4)

Installation: Do not install or use the pump in an environment exposed

to atmospheric agents (rain, snow, ice), dust, aggressive gases, or in

explosive environments or those with a high fire risk. During operation,

the following environmental conditions must be respected:

•Temperature: from +12 °C to + 45 °C

•Relative humidity: up to 90% (non-condensing)

Plug in power cord, flip switch ON behind unit.

Wait about 7 minutes for "SYSTEM READY."

First time startup will

prompt a wizard to help

select language, units,

date, time, and options.

These may be changed

any time through the

menu screens.

Calibration Set Up (Manual Section 4.1)

•Read Internal Leak -Quick check to see if instrument reads

calibrated leak correctly

•To Calibrate:

1. Select Internal Leak and Full.

2. Tap Calibrate.

3. Tap OK when calibration is complete.

Menu Navigation (Manual Section 1.5)

Calibration

Calibrate with

Internal/External

Leak

External leak to be placed on Test Port or vacuum system.

Internal leak is provided instrument.

Calibrate

Full/Fast

Full Spectrometer Calibration/

Fast Gain Adjustment

Test

Configuration

Set Points

Set Point: Leak Rate, Pressure, Audio

Advanced

Features

High Pressure Test, Fine Test Only,

Auto-Zero < 0, Gross Test, Transfer Points (to Test),

Stabilization Wait Time

Application

Setup

Sniff Method, Spray Method,

High Sensitivity, Auto Sequencer,

Split Flow, PPM Sniff Method

Settings

Main Settings

Date and Time, Units, Languages, Touch, and Sound

Screen Settings

Bar Graph, Range, Analog Output

Remote Control

Remote Setup with Channel Sync

Password and

Restrictions

Restriction Level, Lock Vent Control, Lock All Control

Maintenance

General

Internal Calibrated Leak Setup, Software Update

Manual Tuning

Emission, Ion, Gain Settings

Valve Control

Manually Open and Close Valves

Pump

Inspect Forepump and Exhaust Pump

Gauge

Calibration

Calibrate Thermocouple Gauge to Vacuum or Atmosphere

System Defaults

Set to Factory Defaults

System

Information

System

Information

Software Version, Internal Data

Current Setup

Set Points and Calibration Type

Turn Off

Turbo will brake. Do NOT move leak detector while turbo is

powering down.

Agilent Technologies Helium Leak Detector

G8610, G8611, and G8612 Series Quick Reference Card

You must consult operations manual, p/n G8610-90001, provided with

the leak detector, in order to operate the equipment in a safe manner.

Main Controls (Manual Section 1.5)

•Test -Measure helium leak rate

•Hold -Isolate leak detector from connected vacuum system while keeping both under vacuum

•Zero -Nullify current leak rate reading and establish a new baseline

•Vent -Bring test port to atmospheric pressure

Home Screen Display (Manual Section 1.5 and 3.11)

Application Setup (Manual Section 5.1.3)

Shutdown (Manual Section 1.3.5)

Tap the Power icon and follow the prompts.

Otros manuales para G8610 Series

Este manual sirve para los siguientes modelos

Otros manuales de Sensor de seguridad de Agilent Technologies

Agilent Technologies

Agilent Technologies G6600-90006 Manual de usuario

Agilent Technologies

Agilent Technologies 8480 Series Manual de servicio

Agilent Technologies

Agilent Technologies G3440-68011 Manual de usuario

Agilent Technologies

Agilent Technologies 1100 Series Manual de usuario

Agilent Technologies

Agilent Technologies 1260 Infinity Manual de usuario

Agilent Technologies

Agilent Technologies PHD-4 Manual de usuario

Agilent Technologies

Agilent Technologies CrossLab CS Manual de usuario

Agilent Technologies

Agilent Technologies G1314B Manual de usuario

Agilent Technologies

Agilent Technologies 5973N Manual

Agilent Technologies

Agilent Technologies VS Series Manual de usuario

Agilent Technologies

Agilent Technologies 1260 Infinity Manual de usuario

Agilent Technologies

Agilent Technologies 1200 series Manual de usuario

Agilent Technologies

Agilent Technologies 1100 Series Manual de usuario

Agilent Technologies

Agilent Technologies G3485A Manual de usuario

Agilent Technologies

Agilent Technologies 8355 Sulfur Manual de usuario

Agilent Technologies

Agilent Technologies 1260 Infinity Manual de usuario

Agilent Technologies

Agilent Technologies 355 SCD Manual de usuario

Agilent Technologies

Agilent Technologies VS C15 Series Guía

Agilent Technologies

Agilent Technologies G8610 Series Manual de usuario

Agilent Technologies

Agilent Technologies 85037A Manual de servicio

Agilent Technologies

Agilent Technologies 5975 Series Manual

Agilent Technologies

Agilent Technologies 1100 Series Manual de usuario

Agilent Technologies

Agilent Technologies G3388B Manual de instalación

Agilent Technologies

Agilent Technologies G3388A Manual de usuario

Manuales populares de Sensor de seguridad de otras marcas

THORLABS

THORLABS PDA10JT Manual de usuario

Waeco

Waeco UV-DETECT Manual de usuario

Intermatic

Intermatic IOS-DSIMF Manual de usuario

urmet domus

urmet domus 1083 Manual de usuario

Siemens

Siemens AZL66 Series Manual de usuario

BTI

BTI Profiline Multi Finder Manual de usuario

Challenger

Challenger SL01 Manual de usuario

DMP Electronics

DMP Electronics 1122INT Manual de usuario

Rielta

Rielta Ladoga MK-RK Manual de usuario

Mirion Technologies

Mirion Technologies ACCURAD PRD Manual de usuario

Bosch

Bosch DS835 Manual de usuario

DBI SALA

DBI SALA EZ Stop Manual del operador

Lamptime

Lamptime ST05C Manual de usuario

Ubiquiti

Ubiquiti MFI-MSC Manual de usuario

Subsite

Subsite 910R Instrucciones de instalación

Satel

Satel OPAL Pro Manual de usuario

Aleph

Aleph XC-1XTEU Manual de usuario

Pima

Pima LARIS QUAD Manual de usuario