Agilent Technologies E5270 Series Manual de usuario

Agilent E5270 TIS User’s Guide

Agilent E5270 Series of Parametric Measurement Solutions

E5270-90030

December 2002

Edition 1

2 Agilent E5270 TIS User’s Guide, Edition 1

Legal Notice

The information contained in this document is subject to change without notice.

This document contains information which is protected by copyright. All rights are

reserved. Reproduction, adaptation, or translation without prior written permission

is prohibited, except as allowed under the copyright laws.

• Product Warranty

Agilent Technologies warrant Agilent Technologies hardware, accessories and

supplies against defects in materials and workmanship for the period of one year

from the warranty start date specified below. If Agilent Technologies receive

notice of such defects during the warranty period, Agilent Technologies will, at

its option, either repair or replace products which prove to be defective.

Replacement products may be either new or like-new.

Warranty service of this product will be performed at Agilent Technologies.

Buyer shall prepay shipping charges to Agilent Technologies and Agilent

Technologies shall pay shipping charges to return the product to Buyer.

However, Buyer shall pay all shipping charges, duties, and taxes for products

returned to Agilent Technologies from another country.

Agilent Technologies do not warrant that the operation of Agilent Technologies

products will be uninterrupted or error free. If Agilent is unable, within a

reasonable time, to repair or replace any product to a condition as warranted,

customer will be entitled to a refund of the purchase price upon prompt return of

the product.

The Agilent Technologies products may contain remanufactured parts

equivalent to new in performance or may have been subject to incidental use.

The warranty period begins on the date of delivery or on the date of installation

if installed by Agilent Technologies. If customer schedules or delays Agilent

Technologies installation more than 30 days after delivery, warranty begins on

the 31st day from delivery.

Warranty does not apply to defects resulting from (a) improper or inadequate

maintenance or calibration, (b) software, interfacing, parts or supplies not

supplied by Agilent Technologies, (c) unauthorized modification or misuse, (d)

operation outside of the published environmental specifications for the product,

or (e) improper site preparation or maintenance.

Agilent E5270 TIS User’s Guide, Edition 1 3

To the extent allowed by local law, the above warranties are exclusive and no

other warranty or condition, whether written or oral, is expressed or implied and

Agilent Technologies specifically disclaim any implied warranties or conditions

of merchantability, satisfactory quality, and fitness for a particular purpose.

Agilent Technologies will be liable for damage to tangible property per incident

up to the greater of $300,000 or the actual amount paid for the product that is the

subject of the claim, and for damages for bodily injury or death, to the extent

that all such damages are determined by a court of competent jurisdiction to

have been directly caused by a defective Agilent Technologies product.

To the extent allowed by local law, the remedies in this warranty statement are

customer’s sole and exclusive remedies. Expect as indicated above, in no event

will Agilent Technologies or its suppliers be liable for loss of date or for direct,

special, incidental, consequential (including lost profit or date), or other damage,

whether based in contract, tort, or otherwise.

For consumer transactions in Australia and New Zealand: the warranty terms

contained in this statement, except to the extent lawfully permitted, do not

exclude, restrict or modify and are in addition to the mandatory statutory rights

applicable to the sale of this product to you.

•Assistance

Product maintenance agreements and other customer assistance agreements are

available for Agilent Technologies products.

For any assistance, contact your nearest Agilent Technologies Sales Office.

•Certification

Agilent Technologies Inc. certifies that this product met its published

specifications at the time of shipment from the factory. Agilent further certifies

that its calibration measurements are traceable to the National Institute of

Standards and Technology (NIST), to the extent allowed by the Institute’s

calibration facility, and to the calibration facilities of other International

Standards Organization members.

Printing History

Edition 1: December 2002

4 Agilent E5270 TIS User’s Guide, Edition 1

In This Manual

The Test Instruction Set (TIS) is a set of powerful functions that facilitate

measurement programming for the Agilent E5270, and supports the following

applications:

•DC current/voltage output

•High speed spot measurement

•Multi channel spot measurement

•Pulsed spot measurement

•Staircase sweep measurement

•Pulsed sweep measurement

•Staircase sweep with pulsed bias measurement

•Breakdown voltage measurement

•Leakage current measurement

The Agilent E5270 TIS library is available for the C language users. Measurement

programs that include TIS functions are easier to maintain than programs written

solely in the C language.

This manual describes the installation and reference information of the Agilent

E5270 TIS, and consists of the following chapters:

•“Starting TIS Programming”

Describes the intallation information of the Agilent E5270 TIS library, and

general information for programming.

•“TIS Function Reference”

Describes the reference information of the Agilent E5270 TIS functions.

Microsoft, Windows, Windows NT, and Visual C/C++ are registered trademarks of Microsoft Corporation. Borland and

C/C++ Builder are trademarks or registered trademarks of Borland Software Corporation. All other trademarks are the

property of their respective owners.

Contents

Agilent E5270 TIS User’s Guide, Edition 1 Contents - 1

1. Starting TIS Programming

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

Installing TIS Library . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

TIS Programming. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7

Planning Measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7

Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8

Debugging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-11

Migration to Agilent 4070 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-13

2. TIS Function Reference

How to Use the Reference Pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Function Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Synopsis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Arguments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

See Also . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

Function Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5

Summary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5

Arguments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9

close_E5270 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13

connect_pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14

disable_port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-15

disconnect_all . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16

error_info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-17

force_i . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-18

force_v . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-20

init_system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-21

measure_bdv . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-22

measure_i, measure_it . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-24

Contents - 2 Agilent E5270 TIS User’s Guide, Edition 1

Contents

measure_ileak . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-26

measure_m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-28

measure_p . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-30

measure_v, measure_vt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-32

port_status, port_status_t . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-34

open_E5270 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-36

reset_timestamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-37

set_adc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-38

set_bdv . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-40

set_ileak . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-42

set_iv . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-45

set_pbias. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-52

set_piv . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-57

set_smu_ch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-63

set_sync . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-64

set_timestamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-67

status_miv . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-68

sweep_iv . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-69

sweep_miv . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-71

vi_E5270 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-74

Agilent E5270 TIS User’s Guide, Edition 1

1 Starting TIS Programming

1-2 Agilent E5270 TIS User’s Guide, Edition 1

Starting TIS Programming

This chapter describes the installation information of the Agilent E5270 TIS library,

and basic information for programming.

•“Installation”

•“TIS Programming”

•“Migration to Agilent 4070”

Agilent E5270 TIS User’s Guide, Edition 1 1-3

Starting TIS Programming

Installation

This section describes the system requirements and installation procedure for the

Agilent E5270 TIS library.

•“System Requirements”

•“Installing TIS Library”

System Requirements

The following system environments are required.

•Operating system

Microsoft Windows XP Professional, Windows 2000, Windows NT 4.0, or

Windows 95. It must be supported by the application development environment

and VISA I/O library.

•Application development environment (or programming environment)

Microsoft Visual C++ or Borland C++Builder. It must be supported by the VISA

I/O library.

•GPIB (IEEE 488) interface and 32-bit VISA I/O library

Agilent GPIB interface with Agilent IO Libraries or equivalent.

•Agilent E5270 VXIplug&play driver

The driver is required to use the Agilent E5270 TIS library. The Agilent E5270

TIS library and VXIplug&play driver are stored in the Software CD-ROM

furnished with the Agilent E5270.

•Computer and peripherals

Required specifications depend on the application development environment.

See manual of the application development environment. The CD-ROM drive is

required to install the VXIplug&play driver and TIS library.

•Minimum disk space

4 MB (2 MB for the Agilent TIS library and 2 MB for VXIplug&play driver)

1-4 Agilent E5270 TIS User’s Guide, Edition 1

Starting TIS Programming

Installation

Installing TIS Library

The installation flow is shown below. If you have already installed the GPIB (IEEE

488) interface, VISA I/O library, and programming software (Microsoft C++ or

Borland C++Builder) on your computer, skip steps 1 through 4.

1. Install the GPIB interface to your PC.

See manual of the GPIB interface. Note the model number of the GPIB

interface, as you may need it to configure the interface (in step 3).

2. Install VISA I/O library.

Follow the setup program instructions.

3. Configure and check the GPIB interface.

See manual of the VISA I/O library.

4. Install the programming software.

Follow the setup program instructions.

5. Install the Agilent E5270 VXIplug&play driver.

a. Insert the Agilent E5270 Series Software CD-ROM to the CD-ROM drive

connected to your computer.

b. Execute \Pnp\E5270.exe on the CD-ROM.

The setup program installs the driver. See Table 1-1 for the installed files. The

TIS library will refer the driver to control the Agilent E5270.

6. Install the Agilent E5270 TIS library.

a. Insert the Agilent E5270 Series Software CD-ROM to the CD-ROM drive

connected to your computer.

b. Create a folder (e.g. C:\Agilent\E5270) on your computer.

c. Copy the Tis subdirectory on the Software CD-ROM to the created folder.

See Table 1-2 for the installed files.

Tabla de contenidos

Otros manuales de Instrumento de medición de Agilent Technologies

Agilent Technologies

Agilent Technologies 81200 Manual de usuario

Agilent Technologies

Agilent Technologies 1145A Manual

Agilent Technologies

Agilent Technologies 4285A Manual de usuario

Agilent Technologies

Agilent Technologies Cary Eclipse Manual de usuario

Agilent Technologies

Agilent Technologies 8753ET Manual de usuario

Agilent Technologies

Agilent Technologies 4395A Manual de usuario

Agilent Technologies

Agilent Technologies E8364BPNA Series Guía de inicio rápido

Agilent Technologies

Agilent Technologies X Series Manual de usuario

Agilent Technologies

Agilent Technologies B1500A Guía de instalación

Agilent Technologies

Agilent Technologies E444xAU Option H37 Manual de usuario

Agilent Technologies

Agilent Technologies 8753ES Manual de usuario

Agilent Technologies

Agilent Technologies WireScope 350 Manual de usuario

Agilent Technologies

Agilent Technologies 85103F Manual de usuario

Agilent Technologies

Agilent Technologies 5062-8218 Manual de instalación y operación

Agilent Technologies

Agilent Technologies 8712ET Manual de usuario

Agilent Technologies

Agilent Technologies 85301B Manual de usuario

Agilent Technologies

Agilent Technologies 437B Manual de usuario

Agilent Technologies

Agilent Technologies PSA Series Manual de instalación y operación

Agilent Technologies

Agilent Technologies 2100 Bioanalyzer System Instrucciones de funcionamiento

Agilent Technologies

Agilent Technologies 2200 TapeStation Manual de usuario

Agilent Technologies

Agilent Technologies 35670A Manual de usuario

Agilent Technologies

Agilent Technologies 35670A Manual de usuario

Agilent Technologies

Agilent Technologies 8720E Series Manual de usuario

Agilent Technologies

Agilent Technologies E5071C Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario