Agilent Technologies 85103F Manual de usuario

Agilent Technologies

85103F

Network Analyzer

Performance Upgrade

Installation Manual

Manufacturing Part Number: 85103-90014

Printed in USA

November 2002

Supersedes: August 2002

Notice

The information contained in this document is subject to change

without notice.

Agilent Technologies makes no warranty of any kind with regard to this

material, including, but not limited to, the implied warranties of

merchantability and fitness for a particular purpose. Agilent

Technologies shall not be liable for errors contained herein or for

incidental or consequential damages in connection with the furnishing,

performance, or use of this material.

Agilent Technologies assumes no responsibility for the use or reliability

of its software on equipment that is not furnished by Agilent

Technologies.

This document contains proprietary information which is protected by

photocopied, reproduced, or translated to another language without

prior written consent of Agilent Technologies.

Restricted Rights Legend

Use, duplication, or disclosure by the U.S. Government is subject to

restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in

Technical Data and Computer Software clause at DFARS 252.227-7013

for DOD agencies, and subparagraphs (c)(1) and (c)(2) of the

Commercial Computer Software Restricted Rights clause at FAR

52.227-19 for other agencies.

Agilent Technologies

1400 Fountaingrove Parkway

Santa Rosa, CA 95403-1799, U.S.A.

iii

Certification

Agilent Technologies certifies that this product met it’s published

specifications at the time of shipment from the factory. Agilent

Technologies further certifies that its calibration measurements are

traceable to the United States National Institute of Standards and

Technology (NIST, formerly NBS) to the extent allowed by the Institute’s

calibration facility, and to the calibration facilities of other

International Standards Organization members.

Warranty

THE MATERIAL CONTAINED IN THIS DOCUMENT IS PROVIDED

"AS IS," AND IS SUBJECT TO BEING CHANGED, WITHOUT

NOTICE, IN FUTURE EDITIONS. FURTHER, TO THE MAXIMUM

EXTENT PERMITTED BY APPLICABLE LAW, AGILENT

DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED

WITH REGARD TO THIS MANUAL AND ANY INFORMATION

CONTAINED HEREIN, INCLUDING BUT NOT LIMITED TO THE

IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS

FOR A PARTICULAR PURPOSE. AGILENT SHALL NOT BE LIABLE

FOR ERRORS OR FOR INCIDENTAL OR CONSEQUENTIAL

DAMAGES IN CONNECTION WITH THE FURNISHING, USE, OR

PERFORMANCE OF THIS DOCUMENT OR ANY INFORMATION

CONTAINED HEREIN. SHOULD AGILENT AND THE USER HAVE

A SEPARATE WRITTEN AGREEMENT WITH WARRANTY TERMS

COVERING THE MATERIAL IN THIS DOCUMENT THAT

CONFLICT WITH THESE TERMS, THE WARRANTY TERMS IN

THE SEPARATE AGREEMENT WILL CONTROL.

Assistance

Product maintenance agreements and other customer assistance

agreements are available for Agilent Technologies products.

For assistance, refer to “Contacting Agilent” on page iv.

Contacting Agilent

Any adjustment, maintenance, or repair of this product must be

performed by qualified personnel. Contact Agilent for assistance.

Online assistance: www.agilent.com/find/assist

United States

(tel) 1 800 452 4844, or

1 800 593 6635 for on-site

service of systems

Latin America

(tel) (305) 269 7500

(fax) (305) 269 7599

Canada

(tel) 1 877 894 4414

(fax) (905) 282-6495

Europe

(tel) (+31) 20 547 2323

(fax) (+31) 20 547 2390

New Zealand

(tel) 0 800 738 378

(fax) (+64) 4 495 8950

Japan

(tel) (+81) 426 56 7832

(fax) (+81) 426 56 7840

Australia

(tel) 1 800 629 485

(fax) (+61) 3 9210 5947

Singapore

(tel) 1 800 375 8100

(fax) (65) 836 0252

Malaysia

(tel) 1 800 828 848

(fax) 1 800 801 664

Philippines

(tel) (632) 8426802

(tel) (PLDT subscriber only):

1 800 16510170

(fax) (632) 8426809

(fax) (PLDT subscriber only):

1 800 16510288

Thailand

(tel) outside Bangkok:

(088) 226 008

(tel) within Bangkok:

(662) 661 3999

(fax) (66) 1 661 3714

Hong Kong

(tel) 800 930 871

(fax) (852) 2506 9233

Taiwan

(tel) 0800-047-866

(fax) (886) 2 25456723

People’s Republic of

China

(tel) (preferred):

800-810-0189

(tel) (alternate):

10800-650-0021

(fax) 10800-650-0121

India

(tel) 1-600-11-2929

(fax) 000-800-650-1101

Safety and Regulatory Information

Review this product and related documentation to familiarize yourself

with safety markings and instructions before you operate the

instrument. This product has been designed and tested in accordance

with international standards.

WARNING The WARNING notice denotes a hazard. It calls attention to a

procedure, practice, or the like, that, if not correctly performed

or adhered to, could result in personal injury. Do not proceed

beyond a WARNING notice until the indicated conditions are

fully understood and met.

CAUTION The CAUTION notice denotes a hazard. It calls attention to an

operating procedure, practice, or the like, which, if not correctly

performed or adhered to, could result in damage to the product or loss of

important data. Do not proceed beyond a CAUTION notice until the

indicated conditions are fully understood and met.

Instrument Markings

When you see this symbol on your instrument, you should refer to the

instrument’s instruction manual for important information.

This symbol indicates hazardous voltages.

The C-tick mark is a registered trademark of the Spectrum

Management Agency of Australia.

This symbol indicates that the instrument requires alternating

current (ac) input.

The CE mark is a registered trademark of the European Community.

If it is accompanied by a year, it indicates the year the design was

proven.

The CSA mark is a registered trademark of the Canadian Standards

Association.

1SM1-A This text indicates that the instrumentis an Industrial Scientific and

Medical Group 1 Class A product (CISPER 11, Clause 4).

ICES/NMB-001 This ISM device complies with Canadian ICES-001.

Cet appareil ISM est conforme a la norme NMB-001 du Canada.

This symbol indicates that the power line switch is ON.

This symbol indicates that the power line switch is OFF or in

STANDBY position.

Safety Earth Ground

This is a Safety Class I product (provided with a protective earthing

terminal). An uninterruptible safety earth ground must be provided

from the main power source to the product input wiring terminals,

power cord, or supplied power cord set. Whenever it is likely that the

protection has been impaired, the product must be made inoperative

and secured against any unintended operation.

Before Applying Power

Verify that the product is configured to match the available main power

source as described in the input power configuration instructions in this

manual. If this product is to be powered by autotransformer, make sure

the common terminal is connected to the neutral (grounded) side of the

ac power supply.

Battery Information

The 8510C uses a lithium polycarbon monoflouridebattery to power the

instrument clock. The battery is located on the A7 I/O board of the

85101C display/processor. This battery is not field replaceable. Replace

the A7 I/O board if the battery requires replacement.

WARNING Danger of explosion if battery is incorrectly replaced. Replace

only with the same or equivalent type recommended. Discard

used batteries according to manufacturer’s instructions.

vii

Typeface Conventions

Italics • Used to emphasize important information:

Use this software only with the Agilent Technologies xxxxxX system.

• Used for the title of a publication:

Refer to the Agilent Technologies xxxxxX System-Level User’s Guide.

• Used to indicate a variable:

Type LOAD BIN filename.

Instrument

Display • Used to show on-screen prompts and messages that you will see on

the display of an instrument:

The Agilent Technologies xxxxxX will display the message

CAL1 SAVED.

Keycap • Used for labeled keys on the front panel of an instrument or on a

computer keyboard:

Press Return.

[Softkey]• Used for simulated keys that appear on an instrument display:

Press [Prior Menu].

User Entry • Used to indicate text that you will enter using the computer

keyboard; text shown in this typeface must be typed exactly as

printed:

Type LOAD PARMFILE

• Used for examples of programming code:

#endif//ifndef NO_CLASS

Path name • Used for a subdirectory name or file path:

Edit the file usr/local/bin/sample.txt

Computer Display • Used to show messages, prompts, and window labels that appear on

a computer monitor:

The Edit Parameters window will appear on the screen.

• Used for menus, lists, dialog boxes, and button boxes on a computer

monitor from which you make selections using the mouse or

keyboard:

Double-click EXIT to quit the program.

viii

What You’ll Find in This Manual...

Using this document and an Agilent Technologies 85103F upgrade

package, a trained Agilent Technologies service engineer can upgrade

an Agilent Technologies 8510A (with serial number 03000 or greater) or

8510B to full Agilent Technologies 8510C capability.

Agilent Technologies does not recommend customer installation.

The Agilent Technologies 85103F performance upgrade package comes

with prepaid installation. Please contact Agilent to arrange fora service

engineer to install the upgrade kit. Refer to “Contacting Agilent” on

page iv.

Contents

.The 85103F Upgrade Package

(8510A/B to 8510C)

Installing the Upgrade. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2

Warranty Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2

Source Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2

Performance Verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-3

Time Domain Option. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-3

Procedure Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-4

Checking 8510 System Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-7

Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-7

Converting Files from Tape to Disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-9

Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-9

Attended Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-10

Storing a Binary Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-11

Converting Cal Kit Files. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-11

Replacing the A20 Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-12

Attaching New Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-14

Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-14

Upgrading an 8360 Source. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-16

Reconnecting the System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-17

Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-17

Loading the 8510C Operating System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-18

Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-18

Checking the 8510C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-19

85101C Functional Check. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-19

85102 Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-19

LO Phase Lock Out Functional Check. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-20

Trigger In Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-22

Time Domain Option Functional Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-24

Checking Calibration Kit Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-25

Viewing Calibration Kit Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-25

Loading a Calibration Kit Definition. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-25

Contents

Tabla de contenidos

Otros manuales de Instrumento de medición de Agilent Technologies

Agilent Technologies

Agilent Technologies N9030A Manual de usuario

Agilent Technologies

Agilent Technologies 300A Manual de usuario

Agilent Technologies

Agilent Technologies U3401A Manual

Agilent Technologies

Agilent Technologies 86038B Manual de usuario

Agilent Technologies

Agilent Technologies NFA Series Manual de usuario

Agilent Technologies

Agilent Technologies WireScope 350 Manual de usuario

Agilent Technologies

Agilent Technologies Agilent 4396B Manual de usuario

Agilent Technologies

Agilent Technologies U1211A Manual de usuario

Agilent Technologies

Agilent Technologies U3401A Manual de usuario

Agilent Technologies

Agilent Technologies U1731C Manual de usuario

Agilent Technologies

Agilent Technologies 8720E Series Manual de usuario

Agilent Technologies

Agilent Technologies U5303A Guía del usuario

Agilent Technologies

Agilent Technologies 4263B Manual de usuario

Agilent Technologies

Agilent Technologies DSOX4USBSQ USB 2.0 Manual de usuario

Agilent Technologies

Agilent Technologies B1500A Guía de instalación

Agilent Technologies

Agilent Technologies 8720ES Manual de servicio

Agilent Technologies

Agilent Technologies 6800 Series Guía de inicio rápido

Agilent Technologies

Agilent Technologies ADM1000 Manual de usuario

Agilent Technologies

Agilent Technologies 8719ET Manual

Agilent Technologies

Agilent Technologies 8757D Manual de instalación y operación

Agilent Technologies

Agilent Technologies PSA Series Manual de instalación y operación

Agilent Technologies

Agilent Technologies HP 16500B Manual de servicio

Agilent Technologies

Agilent Technologies PSA Series Manual de instalación y operación

Agilent Technologies

Agilent Technologies 4349B Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario