Agilent Technologies 4349B Manual de usuario

The test & measurement

equipment you need at

the price you want.

Alltest carries the world’s largest selection of

used/refurbished benchtop test & measurement

equipment at 50% the price of new.

Our equipment is guaranteed working, warrantied, and

available with certified calibration from our in-house staff

of technicians and engineers.

• 10+ full time technicians with over 150 years of

specialization

• 90 day warranty & 5 day right of return on all

equipment

•

• 1-3 year warranties for new and

premium-refurbished equipment

• Every unit tested to OEM specifications

• Satisfaction guaranteed

You have plans, we will help you achieve them.

Any project. Any budget.

Get a quote today!

CCall (732) 919-3339 or email sales@alltest.net.

Alltest Instruments, Inc.

500 Central Ave.

Farmingdale, NJ 07727

P: (732) 919-3339

F: (732) 919-3332

alltest.net

sales@alltest.net

Agilent 4349B 4-Channel High Resistance Meter

Service Manual

SERIAL NUMBERS

This manual applies directly to instruments with serial number prex JP1KD

or additional important information about serial numbers, read

\Instruments Covered by This Manual" in Chapter 1of

this manual.

Agilent Part No. 04349-90033

Printed in JAPAN March 2001

Notice

The information contained in this document is subject to change without notice

This document contains proprietary information that is protected by copyright. All rights are

reserved. No part of this document may be photocopied, reproduced, or translated to another

language without the prior written consent of the Agilent T

echnologies.

Agilent T

echnologies Japan, Ltd.

Component T

est PGU-Kobe

1-3-2, Murotani, Nishi-ku, Kobe-shi,

Hyogo

,651-2241 Japan



Manual Printing History

ugust 1996

::::::::::::

:::: ::::::::::::: :: ::::

First Edition (part number: 04349-90033)

June 2000

:::::::::

:::: :: :: :::::::::::::::

Second Edition (part number: 04349-90033)

March 2001

::::::::::: :: :: :: ::::

:::::::::::::

:::: ::

Third Edition (part number: 04349-90033)

iii

Safety Summary

The following general safety precautions must be observed during all phases of operation,

service

,and repair of this instrument. F

ailure to comply with these precautions or with specic

ARNINGS

elsewhere in this manual may impair the protection provided by the equipment.

In addition it violates safety standards of design, manufacture, and intended use of the

instrument.

The A

gilent T

echnologies assumes no liability for the customer's failure to comply with these

requirements

Note

4349B complies with INST

ALLA

TION CA

TEGORY II and POLLUTION DEGREE 2

in IEC1010-1. 4349B is INDOOR USE product.

Ground The Instrument

oavoid electric shock hazard, the instrument chassis and cabinet must be connected to a

safety earth ground by the supplied power cable with earth blade

DO NOT Operate In An Explosive Atmosphere

Do not operate the instrument in the presence of ammable gasses or fumes

.Operation of any

electrical instrument in such an environment constitutes adenite safety hazard.

eep Away From Live Circuits

Operating personnel must not remove instrument covers

.Component replacement and internal

adjustments must be made by qualied maintenance personnel. Do not replace components

with the power cable connected. Under certain conditions

,dangerous voltages may exist even

with the power cable removed. T

oavoid injuries

,always disconnect power and discharge

circuits before touching them.

DO NOT Service Or A

djust Alone

Do not attempt internal service or adjustment unless another person, capable of rendering rst

aid and resuscitation, is present.

DO NOT Substitute P

arts Or Modify Instrument

Because of the danger of introducing additional hazards

, do not install substitute parts or

perform unauthorized modications to the instrument. Return the instrument to a Agilent

Technologies Sales and Service Oce for service and repair to ensure that safety features are

maintained.

Dangerous Procedure W

arnings

Warnings

, such as the example below

, precede potentially dangerous procedures throughout

this manual. Instructions contained in the warnings must be followed.

Warning

Dangerous voltages, capable of causing death, are present in this

instrument. Use extreme caution when handling, testing, and adjusting

this instrument.

Certication

Agilent T

echnologies certies that this product met its published specications at the time

of shipment from the factory

.Agilent T

echnologies further certies that its calibration

measurements are traceable to the United States National Institute of Standards and

echnology

,to the extent allowed by the Institution's calibration facility

,or

to the calibration

facilities of other International Standards Organization members.

arranty

This Agilent T

echnologies instrument product is warranted against defects in material and

workmanship for aperiod of one year from the date of shipment, except that in the case of

certain components listed in

General Information

of this manual, the warranty shall be for the

specied period. During the warranty period, Agilent Technologies will, at its option, either

repair or replace products that prove to be defective

or warranty service or repair

,this product must be returned to aservice facility designated by

Agilent Technologies

. Buyer shall prepay shipping charges to Agilent T

echnologies and Agilent

echnologies shall pay shipping charges to return the product to Buyer

.However

,Buyer shall

pay all shipping charges

,duties

,and taxes for products returned to Agilent T

echnologies from

another country

Agilent T

echnologies warrants that its software and rmware designated by Agilent

echnologies for use with an instrument will execute its programming instruction when

property installed on that instrument. Agilent T

echnologies does not warrant that the operation

of the instrument, or software

,or rmware will be uninterrupted or error free

Limitation Of W

arranty

The foregoing warranty shall not apply to defects resulting from improper or inadequate

maintenance by Buyer

,Buyer-supplied software or interfacing, unauthorized modication or

misuse

,operation outside the environmental specications for the product, or improper site

preparation or maintenance

No other warranty is expressed or implied. A

gilent T

echnologies specically disclaims the

implied warranties of merchantability and tness for aparticular purpose

Exclusive Remedies

The remedies provided herein are buyer's sole and exclusive remedies

gilent T

echnologies

shall not be liable for any direct, indirect, special, incidental, or consequential damages,

whether based on contract, tort, or any other legal theory

Assistance

Product maintenance agreements and other customer assistance agreements are available for

Agilent T

echnologies products

or any assistance

,contact your nearest Agilent Technologies Sales and Service Oce

ddresses are provided at the back of this manual.

Safety Symbols

General denitions of safety symbols used on equipment or in manuals are listed below

Instruction manual symbol: the product is marked with this symbol when it is

necessary for the user to refer to the instruction manual.

Alternating current.

Direct current.

On (Supply).

O (Supply).

Frame or chassis terminal

This

arning

sign denotes ahazard. It calls attention to a procedure

,practice

condition or the like

,which, if not correctly performed or adhered to

,could

result in injury or death to personnel.

This

Caution

sign denotes a hazard. It calls attention to aprocedure

,practice

condition or the like

,which, if not correctly performed or adhered to

,could

result in damage to or destruction of part or all of the product.

Note

denotes important information. It calls attention to aprocedure

practice

,condition or the like

,which is essential to highlight.

vii

Documentation Map

Operation Manual

Operation Manual (Agilent P

art Number: 04349-90040 for English edition, 04349-97040 for

Japanese edition) explains specications

,basic measurement explanations

,andhow to verify

conformance to published specications

Service Manual

Service Manual (Agilent P

art Number: 04349-90033) explains how to adjust, troubleshoot, and

repair the 4349B.

How T

oUse This Manual

This is the Service Manual for the 4349B 4-Channel High Resistance Meter

.This manual

contains adjustments and repair information, and consists of the following four chapters

Chapter 1General Information

Chapter 1gives general information for servicing the 4349B .This chapter lists the

recommended equipment for adjustments and troubleshooting.

Chapter 2A

djustments

Chapter 2describes the adjustments

,required to ensure that the 4349B is within its published

specications after it has been repaired, or it fails the performance tests

Chapter 3Assembly Replacement

Chapter 3provides the information on replacing the 4349B assemblies. The information

includes replaceable assembly lists

,and removal and installation procedures.

Chapter 4Troubleshooting

Chapter 4provides the information on troubleshooting the 4349B.The information includes

theory of operation and information on faulty assembly isolation.

Appendix A Manual Changes

Appendix A contains manual changes and provides information for using this manual with

4349Bs manufactured before the printing date of the manual.

Appendix B Default Jumper and Switch Settings

Appendix B describes the settings of the jumpers and switches on the 4349B A2 CPU Board

Assembly. The information is required when the A2 assembly is replaced.

viii

Contents

1. General Information

Introduction ....................

.........1-1

Instruments Covered by This Manual ................

. 1-1

Required Equipment ...................

....1-2

2. A

djustments

Introduction ................

...........2-1

Safety Consideration ................. .. .. .......2-1

Required Equipment .................

..........2-1

djustment T

ools .....................

.........2-2

Adjustable Components . .......................

. 2-2

actory-Selected Components ................

.....2-2

EEPROM Write Protect Switch ...............

...2-2

Related A

djustments ..................

.........2-2

djustment Program ..................

.........2-3

Program Installation ..................... .......2-4

Making aW

orking Copy .........................2-4

Dening the Conguration ........................2-4

Program Execution ............................2-5

djustments Procedure References .............

.........2-6

DC V

oltage Source (DC P

ower Supply or DCV Calibrator) ...........2-6

Channel 1A

djustment ............... .............2-7

Channel 1A

djustment Using DC P

ower Supply ..

.............2-7

Equipment ........

.....................2-7

Setup 1/2 .....

..................... 2-8

Setup 2/2 .......

..................... 2-9

Channel 1A

djustment Using DCV Calibrator .... .. ...........2-10

Equipment ..

...................

.. 2-10

Setup 1/2 ...

..................... .. .. ..2-10

Setup 2/2 ...

............... .. .. .. .. 2-11

Channel 2, 3, and 4A

djustments ................

.......2-11

3. Assembly Replacement

Introduction . . . . . . . . . . . . . . . . . . . . . . . .. .. .. .. .. 3-1

Ordering Information ...... .. .. .. .. .. .. .. .. ...... 3-1

Restored Exchange Assemblies .... .. .. . .. .. .. .. .. .. .. . 3-1

Replacing the A2 CPU Board Assembly .................... 3-2

Replaceable Assembly List ........

.................. 3-2

Replaceable Mechanical P

arts List . . . . . . . .. .. .. .. .. .. .. .. 3-5

Disassembly Procedures .... .. .. .. .. .. .. .. .. .. .. . .. 3-9

Tools and Fasteners ............................ 3-9

Cover Removal . . .. .. .. .. .. .. .. .. .. .. .. .. .. .. 3-9

A1 Main Board Removal .......................... 3-10

Removal Procedure .... .. .. .. .. .. .. .. .. .. . .. .. 3-10

A2 CPU Board Assembly Removal ..................... 3-10

Removal Procedure .... .. .. .. .. .. .. .. .. .. . .. .. 3-10

Contents-1

Otros manuales para 4349B

Tabla de contenidos

Otros manuales de Instrumento de medición de Agilent Technologies

Agilent Technologies

Agilent Technologies E4417A Manual de usuario

Agilent Technologies

Agilent Technologies 4338B Manual de usuario

Agilent Technologies

Agilent Technologies ADM2000 Manual de usuario

Agilent Technologies

Agilent Technologies ESA-E E4404B Manual de usuario

Agilent Technologies

Agilent Technologies 8719ES Manual de usuario

Agilent Technologies

Agilent Technologies 35670A Manual de usuario

Agilent Technologies

Agilent Technologies PSA Series Guía de inicio rápido

Agilent Technologies

Agilent Technologies 8560E Manual de usuario

Agilent Technologies

Agilent Technologies PSA Series Guía de inicio rápido

Agilent Technologies

Agilent Technologies 2100 Bioanalyzer System Instrucciones de funcionamiento

Agilent Technologies

Agilent Technologies E5900B Manual de usuario

Agilent Technologies

Agilent Technologies 3200 Series Manual de usuario

Agilent Technologies

Agilent Technologies Cary 60 Manual de usuario

Agilent Technologies

Agilent Technologies 35670A Manual de usuario

Agilent Technologies

Agilent Technologies ESA-E Series Manual

Agilent Technologies

Agilent Technologies 339B Guía de instalación

Agilent Technologies

Agilent Technologies 35670A Manual de usuario

Agilent Technologies

Agilent Technologies N2771A Manual de usuario

Agilent Technologies

Agilent Technologies 86140B Series Manual de usuario

Agilent Technologies

Agilent Technologies HP 8566B Manual del propietario

Agilent Technologies

Agilent Technologies EPM-P Series Instrucciones de funcionamiento

Agilent Technologies

Agilent Technologies N1913a Manual de usuario

Agilent Technologies

Agilent Technologies 1146B Manual de usuario

Agilent Technologies

Agilent Technologies N9320B Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario