Agilent Technologies IDP3GBKIT Manual de usuario

Tabla de contenidos

Otros manuales de Equipo de laboratorio de Agilent Technologies

Agilent Technologies

Agilent Technologies ESG series Instrucciones de funcionamiento

Agilent Technologies

Agilent Technologies 33120A Manual de usuario

Agilent Technologies

Agilent Technologies gc/ms series Manual de usuario

Agilent Technologies

Agilent Technologies 8860 Manual de usuario

Agilent Technologies

Agilent Technologies Bravo Guía de configuración

Agilent Technologies

Agilent Technologies G1982-6700 Manual de usuario

Agilent Technologies

Agilent Technologies N2727A Manual de usuario

Agilent Technologies

Agilent Technologies 990 Manual de usuario

Agilent Technologies

Agilent Technologies 7200 Manual de funcionamiento

Agilent Technologies

Agilent Technologies 6460 Manual de usuario

Agilent Technologies

Agilent Technologies 5890 Manual de usuario

Agilent Technologies

Agilent Technologies 7200 Manual de usuario

Agilent Technologies

Agilent Technologies AssayMAP Bravo Manual de usuario

Agilent Technologies

Agilent Technologies 83620A Manual de usuario

Agilent Technologies

Agilent Technologies 7697A Manual de instalación

Agilent Technologies

Agilent Technologies PSG Series Manual de usuario

Agilent Technologies

Agilent Technologies 6850 Series II Manual de operación

Agilent Technologies

Agilent Technologies MP-AES Guía

Agilent Technologies

Agilent Technologies Cary 8454 Manual de usuario

Agilent Technologies

Agilent Technologies 490 Micro GC Manual de usuario

Agilent Technologies

Agilent Technologies G1574A Manual de usuario

Agilent Technologies

Agilent Technologies 5975C TAD VL MSD Manual de funcionamiento

Agilent Technologies

Agilent Technologies VGA 77 Manual de usuario

Agilent Technologies

Agilent Technologies 6475 Manual de usuario

Manuales populares de Equipo de laboratorio de otras marcas

Qiagen

Qiagen DML 3000 Manual de usuario

Queensgate

Queensgate NANOSCAN OP400 Manual de programación

Conviron

Conviron GEN1000-GE Manual de usuario

Parr Instrument

Parr Instrument 4560 Manual de instrucciones

IKA

IKA IC control Manual de usuario

Integra

Integra DOSE IT Manual de usuario

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manual de usuario

NI

NI PXI-5422 Manual

Collomix

Collomix Aqix Manual de usuario

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manual de usuario

Ocean Insight

Ocean Insight FLAME-NIR+ Manual de usuario

Parker

Parker ALIGN-MG-NA Manual de usuario

BD

BD 644787 Manual de usuario

DENTAURUM

DENTAURUM Compact Megaplus Manual de usuario

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manual de usuario

VWR

VWR SAS Super IAQ Manual de usuario

illumina

illumina MiSeqDx Manual de usuario

Yamato

Yamato BM510 Manual de usuario

Quick Reference Guide

TPS-compact Gas Ballast

The TPS-compact packaging includes a standard gas ballast kit (P/N IDP3GBKIT) that can be used to prevent water and

other condensates from accumulating within the foreline pump. The standard configuration has a seal screw installed in the

1/4-20 thread in the top of the exhaust manifold. This configuration can be used for dry applications.

When appreciable amounts of water, solvents, etc., are being pumped, remove the seal screw and replace it with the provided

adapter and 1/8" NPT sintered filter plug.

WARNING

Before install gas ballast adapter remove the power supply cable.

1. Disconnect the TPS-compact from electrical power.

2. Unlock the scroll pump support by unscrewing the screws.

3. Lift the TPS-compact in order to access the Scroll pump site.

Quick Reference Guide

4. Unscrew seal screw and install provided gas ballast adapter and 1/8’’ NPT.

5. Lock the scroll pump support by screwing the screws.

Be careful during pump support closing to prevent damage to system components (vacuum pipes and

connectors).

NOTE

1. During the operation of the gas ballast feature the noise may increase.

2. There is not a predefined amount of time to let the gas ballast open: it depends on the amount of

moisture trapped in the system.

Do not exceed 2.8 Nm of torque when installing the adapter into the manifold.

For more details about gas ballast refer to the manuals of the single TPS-compact components.

Use the provided adapter and 1/8" NPT sintered filter plug in order to avoid dust entrance.

The gas ballast must be sealed whenever pumping any gas not intended to be vented to

atmosphere.

Contacts:

U.S. and Canada (toll free):

+1 800 882 7426

vpl-[email protected]

Europe & other countries (toll free):

+00 800 234 234 00

vpt-[email protected]

China (toll free):

400 8206778 (mobile)

800 8206778 (landline)

vpd-support-[email protected]

Visit the product web page: www.agilent.com/chem/tpscompact

This information is subject to change without notice.

© Agilent Technologies, Inc. 2022

Printed in Italy, January 14th, 2022

X3582-90000-9-PUI rev. A.00

CAUTION

CAUTION

CAUTION

CAUTION