Agilent Technologies CrossLab CS Manual de usuario
Agilent CrossLab CS PC Connection
User Manual
Notices
© Agilent Technologies, Inc. 2021
No part of this manual may be reproduced in
any form or by any means (including electronic
storage and retrieval or translation into a
foreign language) without prior agreement and
written consent from Agilent Technologies,
Inc. as governed by United States and
international copyright laws.
Manual Part Number
G6691-90006
Edition
Second edition, July 2021
Printed in China
Agilent Technologies, Inc.
412 Ying Lun Road
Waigoaqiao Free Trade Zone
Shanghai 200131 P.R.China
Warranty
The material contained in this document is
provided “as is,” and is subject to being
changed, without notice, in future editions.
Further, to the maximum extent permitted by
applicable law, Agilent disclaims all
warranties, either express or implied, with
regard to this manual and any information
contained herein, including but not limited to
the implied warranties of merchantability and
fitness for a particular purpose. Agilent shall
not be liable for errors or for incidental or
consequential damages in connection with
the furnishing, use, or performance of this
document or of any information contained
herein. Should Agilent and the user have a
separate written agreement with warranty
terms covering the material in this document
that conflict with these terms, the warranty
terms in the separate agreement
shall control.
Technology Licenses
The hardware and/or software described in
this document are furnished under a license
and may be used or copied only in
accordance with the terms of such license.
Restricted Rights Legend
U.S. Government Restricted Rights. Software
and technical data rights granted to the
federal government include only those rights
customarily provided to end user customers.
Agilent provides this customary commercial
license in Software and technical data
pursuant to FAR 12.211 (Technical Data) and
12.212 (Computer Software) and, for the
Department of Defense, DFARS
252.227-7015 (Technical Data -Commercial
Items) and DFARS 227.7202-3 (Rights in
Commercial Computer Software or Computer
Software Documentation).
Safety Notices
CAUTION
A CAUTION notice denotes a
hazard. It calls attention to an
operating procedure, practice, or the
like that, if not correctly performed
or adhered to, could result in
damage to the product or loss of
important data. Do not proceed
beyond a CAUTION notice until the
indicated conditions are fully
understood and met.
WARNING
A WARNING notice denotes a
hazard. It calls attention to an
operating procedure, practice, or the
like that, if not correctly performed
or adhered to, could result in
personal injury or death. Do not
proceed beyond a WARNING notice
until the indicated conditions are
fully understood and met.
Agilent CrossLab CS PC Connection User Manual 3
Agilent CrossLab CS PC Connection
Introduction 4
Red Cargo Online Access 5
Install the Red Cargo Agent and USB Driver 8
Connect a CrossLab CS device to Red Cargo 11
Retrieve the Certificate of Calibration and Certificate of Calibration Addendum 18
Firmware Upgrade 21
Stream the Real-Time Data 32
Agilent CrossLab CS PC Connection
Introduction
4 Agilent CrossLab CS PC Connection User Manual
Introduction
Overview
This manual provides instructions on several common tasks involving Agilent CrossLab CS
devices. These tasks include downloading a digital Certificate of Calibration (CoC), updating the
firmware of a CrossLab CS device, and connecting a CrossLab CS device to the Red Cargo
web platform.
For more information about Agilent CrossLab CS devices, please refer to their respective
operating instructions.
For system assistance, or to offer suggestions, contact the Agilent Technologies, Inc. Support at
System requirements
•To access the Red Cargo web platform, Agilent recommends the latest available version of
the Internet Explorer web browser.
•For the Red Cargo software to communicate with the CrossLab CS device through USB
connectivity, Windows 10, 32-bit or 64-bit, is required.
•To view the Certificates of Calibration that are downloaded from the Red Cargo website,
Adobe Reader is required.
•To stream data from a CrossLab CS device to a computer, third party terminal emulation
software, such as PuTTY or HyperTerminal, is required.
Agilent CrossLab CS PC Connection User Manual 5
Agilent CrossLab CS PC Connection
Red Cargo Online Access
Red Cargo Online Access
Register or update a Red Cargo Account
Register a Red Cargo account to access more features related to the instrument, such as
performing a firmware upgrade.
Once a Red Cargo account is registered, the username or email address may be updated
as needed.
NOTE For a Red Cargo account to be approved, a valid email address must be provided.
To register a new account or update an existing account
1Use a web browser to open https://redcargo.azurewebsites.net/
2To open the Access product features page, click on the CrossLab CS customer icon.
3Enter the Product Model Number, Product Serial Number and Product Key of the cartridge,
and click Validate. (See To download the CoC and CoC Addendum on page 19).
4Enter the user's First Name, Last Name, and Email Address. A valid email address is required
to receive notification of the account approval status. Click Register (See Figure 1on page 6)
5When the account is approved, an email will be sent to the user-provided email address.
6To update the ownership information of a cartridge already associated with a Red Cargo
account, enter the cartridge’s serial number with a new name and email address, then click
Update. (See Figure 1on page 6).
7If an account update is required, enter the new First Name, Last Name, and Email Address and
click Register.
Agilent CrossLab CS PC Connection
Register or update a Red Cargo Account
6 Agilent CrossLab CS PC Connection User Manual
Figure 1. The Access product features page.
Agilent CrossLab CS PC Connection User Manual 7
Agilent CrossLab CS PC Connection
Sign into to your Red Cargo Account
Sign into to your Red Cargo Account
1Using a web browser, go to https://redcargo.azurewebsites.net.
2Click Start Connect (see Figure 2).
3Enter your Username and Password.
4Click Sign In.
Figure 2. The Red Cargo sign in window.
Agilent CrossLab CS PC Connection
Install the Red Cargo Agent and USB Driver
8 Agilent CrossLab CS PC Connection User Manual
Install the Red Cargo Agent and USB Driver
To use the CrossLab CS device with the online features provided by Red Cargo, the Red Cargo
Agent and the USB Driver must be downloaded and installed. The USB Driver allows a PC to
connect to the CrossLab CS device and the Red Cargo Agent allows the driver to communicate
with the web based interface.
To install the Red Cargo Agent and USB Driver:
1Sign into your Red Cargo account, (see Sign into to your Red Cargo Account). If the Red
Cargo Agent and Driver have not been installed, or if either is out of date, the information bar
will display a prompt to download the agent.
2If a download prompt does not appear, the agent can be downloaded directly from
https://redcargocloud.blob.core.windows.net/public/Red%2
0Cargo%20Agent%20and%20Driver%20Setup.exe.
3Run Red Cargo Agent and Driver Setup.exe.
4From the Welcome page, click Next to proceed with the installation. (To terminate the
installation, click Cancel. Installation can be canceled at any point in the process.)
Agilent CrossLab CS PC Connection User Manual 9
Agilent CrossLab CS PC Connection
Install the Red Cargo Agent and USB Driver
5In the Custom Setup page, select USB Driver (Required for CrossLab CS user), and click Next.
6Click Install.
Agilent CrossLab CS PC Connection
Install the Red Cargo Agent and USB Driver
10 Agilent CrossLab CS PC Connection User Manual
A command prompt window will appear, and the USB driver will be installed. The command
prompt window will close once the installation of the USB driver is complete.
7Once the installation is complete, click Finish.
8Refresh the browser after installation of the Red Cargo Agent.
Otros manuales para CrossLab CS
2
Tabla de contenidos
Otros manuales de Equipo de laboratorio de Agilent Technologies
Agilent Technologies
Agilent Technologies 6100 Series Manual de usuario
Agilent Technologies
Agilent Technologies 1290 Infinity II Manual de usuario
Agilent Technologies
Agilent Technologies N1021B Manual de usuario
Agilent Technologies
Agilent Technologies 1260 Infinity II Manual de usuario
Agilent Technologies
Agilent Technologies 990 Micro GC Guía del usuario
Agilent Technologies
Agilent Technologies IMG-500 Manual de usuario
Agilent Technologies
Agilent Technologies G3199 Series Manual de usuario
Agilent Technologies
Agilent Technologies ZORBAX RRHT Series Manual de usuario
Agilent Technologies
Agilent Technologies 7890 Series Instrucciones de funcionamiento
Agilent Technologies
Agilent Technologies DNA 1000 Kit Manual de usuario
Agilent Technologies
Agilent Technologies Medalist i1000 Manual de usuario
Agilent Technologies
Agilent Technologies InfinityLab LC Series Manual de usuario
Agilent Technologies
Agilent Technologies 53150A Manual de usuario
Agilent Technologies
Agilent Technologies BenchCel Microplate Handler Manual de usuario
Agilent Technologies
Agilent Technologies TS-8989 PXI Manual de usuario
Agilent Technologies
Agilent Technologies Infinity Binary Pump VL 1290 Manual de usuario
Agilent Technologies
Agilent Technologies 7820A Manual de usuario
Agilent Technologies
Agilent Technologies 7200 Manual de usuario
Agilent Technologies
Agilent Technologies 1100 Series Manual de usuario
Agilent Technologies
Agilent Technologies 1290 infinity Manual de usuario
Agilent Technologies
Agilent Technologies Agilent 7700 Series ICP-MS Instrucciones de funcionamiento
Agilent Technologies
Agilent Technologies OmniBER 720 Manual de usuario
Agilent Technologies
Agilent Technologies 1260 Infinity Manual de usuario
Agilent Technologies
Agilent Technologies EXSLRSH110 Manual de usuario
