Agilent Technologies 55 AA Manual de usuario

Fitting Deuterium Lamp Background Correction to

Agilent 50/55 AA Instruments

This instruction sheet describes how to install a deuterium lamp background

correction upgrade to an Agilent 50/55 AA.

Parts List

Description Part Number Description Part Number

Assembly, mirror M5D2 0110598890 Screw (2 off) M5x30 countersunk 1510187300

Assembly, beamsplitter 0110599390 Screw (3 off) M4x12 pan 1510108200

Assembly, D2lamp 0110602800 Set screw (2 off) M4x16 cone point 1510180800

Assembly, loom D2lamp 0110613000 Set screw (2 off) M4x16 oval point 1510180900

Ball bearing 0310031100 Washer 1510126900

Bracket 0410293800 Hex nut M5 1510110200

Bracket, microswitch cover 0410309700 Window, UV silica 2010082600

Microswitch mounting plate 0810018700 Label, D2interlock 3110050300

Cover, D2lamp 0910106900 Spring (2 off) 4610016600

Mount plate 0910110700 Adhesive pad 4910012700

Screw (2 off) 8 BA 1510062600 Installation instructions 8510160900

Screw M4x30 1510109300 Insulating washer 21100002

Installation

To fit the deuterium lamp background correction upgrade:

1Unpack the contents of the kit (part number 9910092500).

2Unplug the 50/55 AA instrument.

WARNING

Electrical Shock Hazard

The instrument contains electrical circuits, devices and components that operate at dangerous

voltages. Contact with these circuits, devices or components can cause death, serious injury or

painful electric shock.

3Remove external covers and the optics cover as described in the Agilent

50/55/140/240/280 AA Service Manual.

Fitting Deuterium Lamp Background Correction to Agilent 50/55 AA Instruments

4Using the supplied 8 BA screws, fit the D2interlock microswitch, its insulating

washer and its cover plate to the lamp panel. Fit the supplied D2interlock label

(part number 3110050300) to the supplied D2lamp cover (part number

0910106900). Fit the D2cover to the rear of the lamp panel.

5Fit the supplied D2lamp assembly to the lamp panel. Connect the supplied D2

loom to 2PL18 on the Control PWB.

6Remove the blanking plate from the floor of the optics chassis above the D2

lamp. It is fixed with double-sided adhesive tape and may be difficult to

remove. Take care to avoid damage to the optics chassis casting. Fit the

supplied adhesive pad (part number 4910012700), to the UV silica window

(part number 2010082600). Fit the silica window to the optics chassis floor in

place of the blanking plate.

7Build the M5D2 assembly from these supplied parts:

assembly M5D2 mirror (part number 0110598890),

ball bearing (part number 0310031100),

mount plate (part number 0910110700),

screw M5x30 countersunk (part number 1510187300),

screw M4x12 pan (part number 1510108200),

washer (part number 1510126900),

hex nut M5 (part number 1510110200), and

spring (part number 4610016600).

8Fit the M5D2 mirror assembly to the optics chassis.

9If you are upgrading a 50 AA, remove the ‘beamsplitter’ (it is really a flat

mirror) assembly from its bracket. Fit the replacement beamsplitter assembly

(part number 0110599390) to the bracket. If you are upgrading a 55 AA, you do

not need to do anything to the fitted beamsplitter, as it is already the right type.

10 You may need to fit a back-lighting assembly to align the M5D2 mirror and

beamsplitter assemblies as described in Section 10.8 of the Agilent

50/55/140/240/280 AA Service Manual.

11 Refit all covers and power the instrument.

Testing the Installation

Exercise the D2lamp using SpectrAA software or service diagnostics SVD.exe.

You have now finished installing this upgrade.

This information is subject to change without notice.

8510160900

*8510160900*

8510160900

Part Number: 8510160900

Edition 04/12

Issue 3

and 2012

Agilent Technologies

679 Springvale Road

Mulgrave, VIC 3170

Este manual sirve para los siguientes modelos

Otros manuales de Equipo de laboratorio de Agilent Technologies

Agilent Technologies

Agilent Technologies 5890 Manual de usuario

Agilent Technologies

Agilent Technologies DNA 7500 Manual

Agilent Technologies

Agilent Technologies AssayMAP 96AM Manual de funcionamiento

Agilent Technologies

Agilent Technologies PlateLoc Manual de usuario

Agilent Technologies

Agilent Technologies CrossLab RapidFire 400 Manual de usuario

Agilent Technologies

Agilent Technologies InfinityLab LC Companion Manual de instrucciones

Agilent Technologies

Agilent Technologies 1260 Infinity II Manual de usuario

Agilent Technologies

Agilent Technologies 1200 series Manual de usuario

Agilent Technologies

Agilent Technologies Intuvo 9000 Hoja de instrucciones

Agilent Technologies

Agilent Technologies Nano Indenter G200 Manual de usuario

Agilent Technologies

Agilent Technologies 7694 Manual de usuario

Agilent Technologies

Agilent Technologies 5975T LTM GC Manual de usuario

Agilent Technologies

Agilent Technologies 1260 Infinity VL Manual de usuario

Agilent Technologies

Agilent Technologies Cary 8454 Manual de usuario

Agilent Technologies

Agilent Technologies 708-DS Manual de usuario

Agilent Technologies

Agilent Technologies BenchCel Manual de usuario

Agilent Technologies

Agilent Technologies BenchCel Microplate Handler Manual de usuario

Agilent Technologies

Agilent Technologies SureCycler 8800 Guía de seguridad

Agilent Technologies

Agilent Technologies Genomic DNA ScreenTape System Manual de usuario

Agilent Technologies

Agilent Technologies OmnoBER 725 Manual de usuario

Agilent Technologies

Agilent Technologies 5100 ICP-OES Instrucciones de funcionamiento

Agilent Technologies

Agilent Technologies 709-DS Manual de usuario

Agilent Technologies

Agilent Technologies 1260 Infinity Manual de usuario

Agilent Technologies

Agilent Technologies agilent 7683B Instrucciones de instalación y funcionamiento

Manuales populares de Equipo de laboratorio de otras marcas

Qiagen

Qiagen DML 3000 Manual de usuario

Queensgate

Queensgate NANOSCAN OP400 Manual de programación

Conviron

Conviron GEN1000-GE Manual de usuario

Parr Instrument

Parr Instrument 4560 Manual de instrucciones

IKA

IKA IC control Manual de usuario

Integra

Integra DOSE IT Manual de usuario

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manual de usuario

NI PXI-5422 Manual

Collomix

Collomix Aqix Manual de usuario

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manual de usuario

Ocean Insight

Ocean Insight FLAME-NIR+ Manual de usuario

Parker

Parker ALIGN-MG-NA Manual de usuario

BD 644787 Manual de usuario

DENTAURUM

DENTAURUM Compact Megaplus Manual de usuario

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manual de usuario

VWR

VWR SAS Super IAQ Manual de usuario

illumina

illumina MiSeqDx Manual de usuario

Yamato

Yamato BM510 Manual de usuario