Aerotech Ensemble QLe Series Manual de usuario

STAGE

J106

AERONET

J102

USB

PWRENB/FLT

High Voltage

DANGER!

POWER INPUT

AC1

AC2

TB101

100-240V~

50/60Hz

2A MAX

OUT

J104

J105

ANALOG

I/O

J107

ETHERNET

J101

J103

SYNC

A B

AUX I/O

J108

Revision: 1.03.00

Ensemble QLe

Hardware Manual

Global Technical Support

Go to www.aerotech.com/global-technical-support for information and support about your Aerotech products. The website

provides downloadable resources (such as up-to-date software, product manuals, and Help files), training schedules, and

PC-to-PC remote technical support. You can also complete Product Return (RMA) forms and get information about repairs

and spare or replacement parts. For immediate help, contact a service office or your sales representative. Have your

customer order number available before you call or include it in your email.

United States (World Headquarters)

Phone: +1-412-967-6440

Fax: +1-412-967-6870

Email: service@aerotech.com

101 Zeta Drive

Pittsburgh, PA 15238-2811

www.aerotech.com

United Kingdom Japan

Phone: +44 (0)1256 855055

Fax: +44 (0)1256 855649

Email: service@aerotech.co.uk

Phone: +81 (0)50 5830 6814

Fax: +81 (0)43 306 3773

Email: service@aerotechkk.co.jp

Germany China

Phone: +49 (0)911 967 9370

Fax: +49 (0)911 967 93720

Email: service@aerotechgmbh.de

Phone: +86 (21) 3319 7715

Email: service@aerotech.com

France Taiwan

Phone: +33 2 37 21 87 65

Email: service@aerotech.co.uk

Phone: +886 (0)2 8751 6690

Email: service@aerotech.tw

This manual contains proprietary information and may not be reproduced, disclosed, or used in whole or in part without the

express written permission of Aerotech, Inc. Product names mentioned herein are used for identification purposes only and

may be trademarks of their respective companies.

Ensemble QLe Hardware Manual Table of Contents

Table of Contents

Ensemble QLe Hardware Manual 1

Table of Contents 3

List of Figures 4

List of Tables 5

EU Declaration of Conformity 7

Agency Approvals 8

Safety Procedures and Warnings 9

Quick Installation Guide 11

Chapter 1: Introduction 13

1.1. Electrical Specifications 16

1.2. Mechanical Design 17

1.3. Environmental Specifications 18

Chapter 2: Installation and Configuration 19

2.1. Unpacking the Chassis 19

2.2. Electrical Installation 20

2.2.1. Power Input (TB101) 20

2.2.2. I/O and Signal Wiring Requirements 21

2.3. Stage Power and Feedback Connections (J106) 22

2.4. Auxiliary I/O Connector (J108) 24

2.4.1. Position Synchronized Output (PSO) 25

2.4.2. Opto-Isolated Outputs 0-3 27

2.4.3. Opto-Isolated Inputs 0-3 29

2.4.4. High-Speed User Inputs 4-5 31

2.4.5. Analog Output 0 32

2.4.6. Differential Analog Input 0 33

2.5. Analog I/O Connector (J107) 34

2.5.1. Analog Output 1 35

2.5.2. Differential Analog Input 1 36

2.5.3. Voltage Monitor Output 37

2.5.4. External Voltage Command 38

2.6. Communication 39

2.6.1. USB Interface 39

2.6.2. Ethernet Interface 40

2.6.3. Aeronet Interface 41

2.6.4. SYNC Interface 42

2.7. PC Configuration and Operation Information 43

Chapter 3: Maintenance 45

3.1. Preventative Maintenance 46

Appendix A: Warranty and Field Service 47

Appendix B: Revision History 49

Index 51

www.aerotech.com 3

Table of Contents Ensemble QLe Hardware Manual

List of Figures

Figure 1-1: Functional Diagram 15

Figure 1-2: Dimensions 17

Figure 2-1: Power Input Connections 20

Figure 2-2: Connection to Third Party Stage 23

Figure 2-3: PSOInterface 26

Figure 2-4: Outputs Connected in Current Sourcing Mode (J108) 28

Figure 2-5: Outputs Connected in Current Sinking Mode (J108) 28

Figure 2-6: Inputs Connected in Current Sourcing Mode (J108) 30

Figure 2-7: Inputs Connected in Current Sinking Mode (J108) 30

Figure 2-8: High Speed User Inputs (J108) 31

Figure 2-9: Analog Input 0 (J108) 33

Figure 2-10: Analog Input 1 (J107) 36

Figure 2-11: USB Connection Location 39

Figure 2-12: Ethernet Connection Location 40

Figure 2-13: Aeronet Connections 41

Figure 2-14: Sync Interface 42

4 www.aerotech.com

Ensemble QLe Hardware Manual Table of Contents

List of Tables

Table 1-1: Configuration and Options 14

Table 1-2: Electrical Specifications 16

Table 1-3: Physical Specifications 17

Table 2-1: Power Supply Wiring (TB101) 20

Table 2-2: I/Oand Signal Wiring Specifications 21

Table 2-3: Power and Feedback Connector (J106) 22

Table 2-4: Auxiliary I/O Interface Pin Assignment (J108) 24

Table 2-5: PSO Specifications 25

Table 2-6: PSOOutput Pin Assignment (J108) 25

Table 2-7: Digital Output Specifications 27

Table 2-8: Digital Output Connector Pin Assignment (J108) 27

Table 2-9: PS2815-4 Opto-Device Specifications 29

Table 2-10: Digital Input Connector Pin Assignment (J108) 29

Table 2-11: High Speed Digital Input Connector Pin Assignment (J108) 31

Table 2-12: High-Speed Digital Input Specifications 31

Table 2-13: Analog Output Specifications (J108) 32

Table 2-14: Analog Output 0 Connector Pin Assignment (J108) 32

Table 2-15: Differential Analog Input Specifications (J108) 33

Table 2-16: Analog Input Connector Pin Assignment (J108) 33

Table 2-17: Analog I/O Connector Pin Assignment (J107) 34

Table 2-18: Analog Output Specifications (J108) 35

Table 2-19: Analog Output 1 Connector Pin Assignment (J107) 35

Table 2-20: Differential Analog Input Specifications (J107) 36

Table 2-21: Analog Input Connector Pin Assignment (J107) 36

Table 2-22: Voltage Monitor Output Connector Pin Assignment (J107) 37

Table 2-23: Voltage Monitor Output Scaling 37

Table 2-24: Voltage Monitor Output Specifications 37

Table 2-25: External Voltage Command Connector Pin Assignment (J107) 38

Table 2-26: External Voltage Command Scaling 38

Table 2-27: External Voltage Command Specifications 38

Table 2-28: Aeronet Cable Part Numbers 41

Table 3-1: LEDDescription 45

Table 3-2: Troubleshooting 45

Table 3-3: Preventative Maintenance 46

www.aerotech.com 5

Table of Contents Ensemble QLe Hardware Manual

6 www.aerotech.com

This page intentionally left blank.

Ensemble QLe Hardware Manual Declaration of Conformity

EU Declaration of Conformity

Manufacturer

Aerotech, Inc.

Address

101 Zeta Drive

Pittsburgh, PA 15238-2811

USA

Product

Ensemble QLe

Model/Types

All

This is to certify that the aforementioned product is in accordance with the applicable requirements of the

following Directive(s):

2014/35/EU Low Voltage Directive LVD

2011/65/EU RoHS2 Directive

and has been designed to be in conformity with the applicable requirements of the following documents when

installed and used in accordance with the manufacturer’s supplied installation instructions.

EN 61010-1:2010 Safety requirements for electrical equipment

Authorized Representative:

Simon Smith, European Director

Address:

Aerotech Ltd

The Old Brick Kiln

Ramsdell, Tadley

Hampshire RG26 5PR

Name

/ Alex Weibel

Position

Engineer Verifying Compliance

Location

Pittsburgh, PA

www.aerotech.com 7

Declaration of Conformity Ensemble QLe Hardware Manual

Agency Approvals

Aerotech, Inc. Model Ensemble QLe Drives have been tested and found to be in accordance to the following

listed Agency Approvals:

Approval / Certification: CUS NRTL

Approving Agency: TUV SUD America Inc.

Certificate #: U8 16 06 68995 019

Standards: UL 61010-1:2012; CAN/CSA-C22.2 No. 61010-1:2012; EN 61010-

1:2010

8 www.aerotech.com

Ensemble QLe Hardware Manual Declaration of Conformity

Safety Procedures and Warnings

The following statements apply wherever the Warning or Danger symbol appears within this manual. Failure

to observe these precautions could result in serious injury to those individuals performing the procedures

and/or damage to the equipment.

W A R N I N G :

To minimize the possibility of electrical shock, bodily injury or death the following precautions

must be followed.

1. Operators must be trained before allowing them to operate the equipment.

2. All service and maintenance must be performed by qualified personnel.

3. Modification or use of this product in an unspecified manner may result in equipment

damage or bodily injury (shock or death).

4. The user must read this manual and related documentation thoroughly before operating the

equipment.

5. Cables can pose a tripping hazard. Securely mount and position all system cables to avoid

potential hazards.

6. This product must be mounted securely. Improper mounting can result in injury and

damage to the equipment.

D A N G E R :

This product contains potentially lethal voltages. To reduce the possibility of electrical shock,

bodily injury or death the following precautions must be followed.

1. Do not connect or disconnect any electrical components or connecting cables while

connected to a power source.

2. Disconnect electrical power before making any mechanical adjustments or performing

maintenance.

3. Do not remove the stage connection (J106) while the controller is engaged. Always remove

ACmains power before making a connection to the controller.

4. To avoid the risk of electric shock, do not touch the piezo stage while it is energized.

5. Make sure the system is properly grounded in accordance with local electrical safety

requirements.

6. Operator safeguarding requirements must be addressed during final integration of the

product.

www.aerotech.com 9

Declaration of Conformity Ensemble QLe Hardware Manual

10 www.aerotech.com

This page intentionally left blank.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Controladores de Aerotech

Aerotech

Aerotech ABL9000 Series Manual de usuario

Aerotech

Aerotech Ensemble QL Manual de usuario

Aerotech

Aerotech APR100DR Series Manual de usuario

Aerotech

Aerotech APR200DR Series Manual de usuario

Aerotech

Aerotech UNIDEX U100i Manual de usuario

Aerotech

Aerotech A3200 Series Manual de usuario

Aerotech

Aerotech Automation1 GI4 Galvo Manual de usuario

Aerotech

Aerotech HPe 150 Manual de usuario

Aerotech

Aerotech PLANAR HD Series Manual de usuario

Aerotech

Aerotech A3200 Series Manual de usuario

Aerotech

Aerotech UNIDEX 11 Manual de usuario

Aerotech

Aerotech Automation1 XL4s Manual de usuario

Aerotech

Aerotech PRO165SLE Series Manual de usuario

Aerotech

Aerotech Automation1 SI4-2P1 Manual de usuario

Aerotech

Aerotech Automation1 SI4 Series Manual de usuario

Aerotech

Aerotech UNIDEX 600 Series Manual de usuario

Aerotech

Aerotech Ensemble HLe Manual de usuario

Aerotech

Aerotech AUTOMATION1-GL4 Manual de usuario

Aerotech

Aerotech 6020HRJ Manual de usuario

Aerotech

Aerotech ECO165SL Series Manual de usuario

Aerotech

Aerotech UNIDEX 500 Manual de usuario

Aerotech

Aerotech Soloist MP Manual de usuario

Aerotech

Aerotech Ensemble QLAB Manual de usuario

Aerotech

Aerotech UNIDEX 511 Manual de usuario

Manuales populares de Controladores de otras marcas

Digiplex

Digiplex DGP-848 Instrucciones de funcionamiento

YASKAWA

YASKAWA SGM series Manual de usuario

Sinope

Sinope Calypso RM3500ZB Manual de usuario

Isimet

Isimet DLA Series Style 2 Manual de instalación

LSIS

LSIS sv-ip5a Manual de usuario

Rockwell Automation

Rockwell Automation 1769-L31 Manual de usuario

Airflow

Airflow Uno hab Manual de usuario

ABB

ABB ACS580-01 drives Manual de usuario

Panasonic

Panasonic GM1 Series Manual de usuario

Emerson

Emerson SW93 Manual de usuario

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manual de usuario

Panasonic

Panasonic FP? Positioning Unit RTEX Manual de usuario

Samson

Samson Type 5824 Manual de servicio

Alpha IP

Alpha IP MIOB 21001 Manual de usuario

Siemens

Siemens OpenAir GMA 1 Series Manual de usuario

Surecom

Surecom SR-629 Manual de usuario

Fishman

Fishman TriplePlay Manual de usuario

Regulus

Regulus SRS1 T Manual de usuario