Advantech Network Device USB-4761 Manual de instalación y operación

1 Startup Manual

STARTUP MANUAL

USB-4761

8-ch Relay, 8-ch IDI USB Module

Before installation, please make sure that you have

received the following:

• USB-4761 Module with DIN-rail mounting kit

• Shielded USB 2.0 Cable (1.8 m)

• Companion CD-ROM (DLL driver included)

• Startup Manual

If anything is missing or damaged, contact your dis-

tributor or sales representative immediately.

User Manual

For more detailed information on this product, please

refer to the USB-4761 User Manual on the CD-ROM

(PDF format). CD:\Documents\Hardware Manu-

als\USB\USB-4761.

FCC Class A

This equipment has been tested and found to comply with

the limits for a Class A digital device, pursuant to part 15 of

the FCC Rules. These limits are designed to provide reason-

able protection against harmful interference when the equip-

ment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residen-

tial area is likely to cause interference in which case the user

is required to correct interference at his own expense.

This product has passed the CE test for environmental speci-

fications when shielded cables are used for external wiring.

We recommend the use of shielded cables. This kind of cable

is available from Advantech. Please contact your local sup-

plier for ordering information.

The Advantech USB-4761 is a powerful data acquisition

(DAS) module for the USB port. It features a unique circuit

design and complete functions for data acquisition and con-

trol.

1. Touch the metal part on the surface of your

computer to neutralize the static electricity that

might be in your body.

2. Plug your USB module into the selected USB port.

Hold the module only by its edges. Plug the mod-

ule firmly into place. Use of excessive force must

be avoided; otherwise the module might get dam-

aged.

Packing List Software Installation

Declaration of Conformity

Overview

Notes

For more information on this and other Advantech prod-

ucts, please visit our websites at:

http://www.advantech.com/eAutomation

For technical support and service:

http://www.advantech.com/support/

This startup manual is for USB-4761

Part No.2003476111 2nd Edition

March 2011

Hardware Installation

2 Startup Manual

Pin Assignments

The USB Module is equipped with an LED indicator to

show the current status of the device. When you plug

the USB device into the USB port, the LED indicator

will blink five times and then stay lit to indicate that it is

on. Please refer to the following table for detailed LED

indicator status information

Single-ended Channel Connections

USB-4761 has 8 isolated digital input channels. Each of

isolated digital input channel accepts 10~30 VDC volt-

age inputs, and accept bi-directional input. It means that

you can apply positive or negative voltage to an isolated

input pin (Vin ). The figure below shows how to con-

nect an external input source to one of the card's iso-

lated input channels.

After power on, the initial relay output status is shown

as below:

Pin Assignments LED Definitions

Isolated Digital Input Connections

Relay Connections

Otros manuales para Network Device USB-4761

Otros manuales de Unidad de control de Advantech

Advantech

Advantech WISE-1510 Manual de usuario

Advantech

Advantech EPD-130 Manual de usuario

Advantech

Advantech SOM-5899 Manual de usuario

Advantech

Advantech MOS-2120-Z1101E Manual de usuario

Advantech

Advantech ADAM-2000 Series Manual de usuario

Advantech

Advantech RISC Module SOM-A2552 Manual de usuario

Advantech

Advantech ADAM-3750 3-Wire Series Manual de instalación y operación

Advantech

Advantech SOM 144 Guía

Advantech

Advantech B+B SmartWorx iMcV-Giga-MediaLinX TX/SFP Manual de usuario

Advantech

Advantech PCM-3117 Manual de instalación y operación

Advantech

Advantech ADAM-2510Z Manual de usuario

Advantech

Advantech PCM-3110 Manual de usuario

Advantech

Advantech B+B SmartWorx IE-iMcV-2xLIM Manual de usuario

Advantech

Advantech PCM-3910 Manual de instalación y operación

Advantech

Advantech MIC-75G30 Manual de instalación y operación

Advantech

Advantech SOM-4466 Manual de usuario

Advantech

Advantech MIO-3121 Manual de instalación y operación

Advantech

Advantech PCM-2610B Manual de instalación y operación

Advantech

Advantech DVP-1020 Manual de usuario

Advantech

Advantech ROM-7510 Manual de usuario

Advantech

Advantech AIW-357 DK-G2U Manual de usuario

Advantech

Advantech ADAM-6051 Manual de usuario

Advantech

Advantech MOS-2110Z-1201E Manual de usuario

Advantech

Advantech PCM-24BXWF Manual de instalación y operación

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario