ADC HRE-425 List 1 Manual de usuario

USER MANUAL

HRE 425

H0333-A

HRE-425 List 1 Remote Enclosure

Product Catalog: 150-1114-01

CLEI: T1MFF504

150-425-100-04

ii September 22, 1999 HRE-425 List 1

Revision History of This Manual

September 22, 1999

Trademark Information

ADC is a registered trademark of ADC Telecommunications, Inc. HiGain is a registered trademark of ADC DSL Systems, Inc.

No right, license, or interest to such trademarks is granted hereunder, and you agree that no such right, license, or interest

shall be asserted by you with respect to such trademark. Other product names mentioned in this practice are used for

identification purposes only and may be trademarks or registered trademarks of their respective companies.

Disclaimer of Liability

Information contained in this document is company private toADC DSL Systems, Inc., and shall not be modified, used, copied,

reproduced or disclosed in whole or in part without the written consent of ADC.

Contents herein are current as of the date of publication. ADC reserves the right to change the contents without prior notice.

In no event shall ADC be liable for any damages resulting from loss of data, loss of use, or loss of profits, and ADC further

disclaims any and all liability for indirect, incidental, special, consequential or other similar damages. This disclaimer of

liability applies to all products, publications and services during and after the warranty period.

Revision Release Date Revisions Made

01 July 20, 1998 Initial release

02 February 1, 1999 Changed fuse, mounting, and connector specifications

03 September 22, 1999 Added rack mounting instructions and edits to text

04 October 18, 2002 ADC rebrand

150-425-100-04

HRE-425 List 1 September 22, 1999 iii

USING THIS MANUAL

The following conventions are used in this manual:

•Monospace type indicates screen text.

•Keys you press are indicated by small icons such as or . Key combinations to be pressed

simultaneously are indicated with a plus sign as follows: + .

•Items you select are in bold.

•Three types of messages, identified by icons, appear in text.

For a list of abbreviations used in this document, refer to “Abbreviations” on page 19.

INSPECTING SHIPMENT

Upon receipt of the equipment:

•Unpack each container and inspect the contents for signs of damage. If the equipment has been damaged in

transit, immediately report the extent of damage to the transportation company and to ADC DSL Systems,

Inc. Order replacement equipment, if necessary.

•Check the packing list to ensure complete and accurate shipment of each listed item. If the shipment is short

or irregular, contact ADC DSL Systems,Inc. as described in“Product Support” on page 17. If you must store

the equipment for a prolonged period, store the equipment in its original container.

Notes contain information about special circumstances.

Cautions indicate the possibility of personal injury or equipment damage.

The Electrostatic Discharge (ESD) symbol indicates that a device or assembly is susceptible to

damage from electrostatic discharge.

YENTER

CTRL ESC

150-425-100-04

iv September 22, 1999 HRE-425 List 1

150-425-100-04 Table of Contents

HRE-425 List 1 September 22, 1999 v

TABLE OF CONTENTS

Overview ____________________________________________________________________________ 1

Features..............................................................................................................................................1

Applications .......................................................................................................................................2

Installation___________________________________________________________________________ 3

Installation Kit....................................................................................................................................3

Mounting Options..............................................................................................................................4

Desktop Mounting...............................................................................................................4

Wall Mounting.....................................................................................................................4

Rack Mounting ....................................................................................................................5

Backplane...........................................................................................................................................6

Power and Grounding ........................................................................................................................6

Fuse Alarm.........................................................................................................................................7

Slot-pin Assignments.........................................................................................................................9

Field Side HDSL Connections ..........................................................................................11

CPE DS1 (G.703) Connections.........................................................................................13

Turn-Up............................................................................................................................................15

Specifications________________________________________________________________________ 16

Product Support _____________________________________________________________________ 17

Bar Code and Configuration Number Information ________________________________________ 18

Abbreviations _______________________________________________________________________ 19

Certification and Warranty______________________________________________ Inside Back Cover

List of Figures 150-425-100-04

vi September 22, 1999 HRE-425 List 1

LIST OF FIGURES

1. HRE-425 List 1 Remote Enclosure................................................................................................................ 1

2. HRE-425 List 1 Backplate ............................................................................................................................. 4

3. Wall Mounting and Hinging View................................................................................................................. 5

4. HRE-425 List 1 Backplane............................................................................................................................. 6

5. HRU Pin Assignments.................................................................................................................................... 7

6. HRE-425 List 1 Shelf Fusing, Backplane Wiring and Bus Connections....................................................... 8

7. HDU-451 and EDU-451 Pin Assignments..................................................................................................... 9

8. HLU-431 Pin Assignments .......................................................................................................................... 10

9. ERU-412 Pin Assignments........................................................................................................................... 11

10. DS1, G.703 RJ48C Harmonic Cable Interface Assembly (Part Number 150-2201-01).............................. 14

11. DS1, G.703 RJ48X Harmonic Cable Interface Assembly (Part Number 150-2201-02).............................. 15

LIST OF TABLES

1. HDSL Connectors ........................................................................................................................................ 12

2. DS1/G.703/Doubler HDSL Connectors....................................................................................................... 13

3. HRE-425 List 1 Bar Code and Configuration Number Label Descriptions................................................. 19

150-425-100-04

HRE-425 List 1 September 22, 1999 1

OVERVIEW

The HiGain®Remote Enclosure HRE-425 List 1 houses HiGain line units, doubler units, and remote units (HLUs,

HDUs, and HRUs, respectively). The HRE-425 List 1 can also accommodate a -48 Vdc power supply to power

the slots, if required.

Access to the twelve slots is provided by wire-wrap card-edge connectors or by four 25-pair, type 57, backplane

connectors. An optional RJ48 cable assembly provides access to the DS1 interface through a 12-port harmonic

connector that attaches to either of the remote enclosure’s two side panels or to the top or bottom panels. A variety

of grommited cable access openings are located on the enclosure’s top, bottom, sides, and rear covers.

FEATURES

The HRE-425 List 1 provides the following features:

•12 slots for 12 plugs, or 11 plugs and a -48 Vdc local power supply in slot 12 only

•optional RJ48C or RJ48X modular jack assemblies for DS1 customer interface connections

•printed-circuit backplane provides wire-wrap or connectorized interface wiring options

•tamper-proof locking screw for security

•separate fuses for each slot

•wall, rack, or desktop mounting

•support for T1 (DS1) and E1 (G.703) applications.

Figure 1 shows a front view of the HRE-425.

Figure 1. HRE-425 List 1 Remote Enclosure

HRE 425

Bantam jack to

chasis ground for

anti-static wrist

band connection

Slots 1-12 Hex nut

H0334-A

150-425-100-04

2 September 22, 1999 HRE-425 List 1

APPLICATIONS

HiGain provides a quick and cost-effective way of delivering T1 High Capacity Digital Service (HCDS) to

customers over metallic cable pairs. The primary application of the HRE-425 List 1 Remote Enclosure is to house

the remote units of a HiGain repeaterless T1 transmission system.

Because the HRE-425 uses standard 400 mechanics slots, it can accommodate any plug with

400 mechanics, including the HDU-451 doubler and the HLU-431 line unit. It can also

accommodate 200 mechanic plugs (half the width of 400 mechanics) used by the HiGain

HRU-411 and HRU-402 remote units.

150-425-100-04

HRE-425 List 1 September 22, 1999 3

INSTALLATION

This section provides information on installing and mounting the HRE-425 List 1.

INSTALLATION KIT

The installation kit contains the following items:

•four rack mounting screws

•four bracket attaching screws with locking nuts

•four plastic cable tie wraps

•one spare 0.5A fuse

•one 2A fuse for slot 12 (see “Fuse Alarm” on page 7.)

•two 19-inch or 23-inch rack mounting brackets

•circuit assignment card

•plastic circuit assignment card holder.

150-425-100-04

4 September 22, 1999 HRE-425 List 1

MOUNTING OPTIONS

The HRE-425 is suitable for mounting on a desk top, wall or equipment rack. Before setting up the equipment,

select a location that provides appropriate security. The remote enclosure has four rubber feet for desktop

installations and four mounting holes in the back cover for wall mounting.

Desktop Mounting

The remote enclosure includes four stand-off rubber feet for desktop mounting. When using the unit on a desktop,

take care to prevent blocking the air flow from the bottom of the unit.

Wall Mounting

The backplate of the remote enclosure has four wall mounting holes to simplify wall-mounting. To mount the

enclosure on a wall, remove the backplate and use it as a template for the mounting holes as follows:

1Loosen the four rear-panel locking bolts and remove the backplate (Figure 2).

Figure 2. HRE-425 List 1 Backplate

2Using the backplate as a template, mark the wall locations for drilling the wall-mounting holes.

3Drill pilot holes and attach the backplate to the backboard with the four No. 10 x 3/4inch PHS wood screws

and washers supplied with the remote enclosure.

4Use the four locking bolts loosened in Step 1 as hinge mounting bolts to reattach the backplate to the main

chassis side panels. (See Figure 3 on page 5.)

When the main chassis is attached to the backplate, it can be rotated up or down by removing

the two upper or lower mounting bolts and slightly loosening the two remaining mounting bolts

to allow them to act as hinges. This provides access to the enclosure’s backplane and other

internal areas. See Figure 3 on page 5 for hinging details.

RearView

Locking

bolts

Locking bolt

Grommeted cable

access openings

Wall mounting holes

Locking bolt

8.25"

17.25"

H0328-A

Otros manuales para HRE-425 List 1

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Hardware de red de ADC

ADC

ADC LoopStar 780 Manual de usuario

ADC

ADC HiGain HLU-432 Manual de usuario

ADC

ADC HIGAIN H2TU-R-402-L7A1 Instrucciones de funcionamiento originales

ADC

ADC HiGain HLU-432 Instrucciones de funcionamiento originales

ADC

ADC OmniReach oFDT-48 Manual de usuario

ADC

ADC Fiber Optic Panel FL2000 Series Manual de usuario

ADC

ADC Cross-Connect Family FlexDSX Manual de usuario

ADC

ADC UltraWAVE GSM Network-In-A-Box 105968AE Manual de usuario

ADC

ADC HiGain HRE-420 Manual de usuario

ADC

ADC ETP-64 Manual de usuario

ADC

ADC H2TU-C-202 Manual de usuario

ADC

ADC HiGain HLU-200 Manual de usuario

ADC

ADC H2TU-C-388 HiGain Manual de usuario

ADC

ADC Double Pair/Line Power G.SHDSL WorldDSL G.S Manual de usuario

ADC

ADC H2TU-C-388 HiGain Instrucciones de funcionamiento originales

ADC

ADC HIGAIN H4TU-C-231 LIST 5A Instrucciones de funcionamiento originales

ADC

ADC H2TU-C-231 List 2F Instrucciones de funcionamiento originales

ADC

ADC UniPatch Modular System RS-422 Manual de usuario

ADC

ADC H2TU-C-388 HiGain Manual de usuario

ADC

ADC DSX-1 Manual de usuario

ADC

ADC LoopStar 750 Manual de usuario

ADC

ADC Fiber Optic Panel FL2000 Series Manual de usuario

ADC

ADC Migration Modules DSX-3 Manual de usuario

ADC

ADC H4TU-C-319 List 1 Line Unit Manual de usuario

Manuales populares de Hardware de red de otras marcas

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manual de usuario

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manual de usuario

Yudor

Yudor YDS-16 Manual de usuario

D-Link

D-Link ShareCenter DNS-320L Manual de usuario

Samsung

Samsung ES1642dc Instrucciones de uso

Honeywell Home

Honeywell Home LTEM-PV Instrucciones de montaje

evertz

evertz 7700 Series Manual de usuario

D-Link

D-Link ShareCenter DNS-343 Manual de usuario

Asante

Asante AsanteBridge 1012 Manual de usuario

FireBrick

FireBrick FB2700 Manual de usuario

Audiovox Electronics

Audiovox Electronics ARWH2T Manual de usuario

NetComm

NetComm NF2 Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 5620 Manual de usuario

Dell EMC

Dell EMC XC6420 Series Manual de usuario

Lanner

Lanner NCA-1020A Manual de usuario

Allied Telesis

Allied Telesis AT-TN121-A Manual de usuario

Arista

Arista CCA-ETM-Q12 Manual de usuario

Lanner

Lanner NCA-1525 Manual de usuario