ACME Junior Series Manual de usuario

0Introduction

Thank you for purchasing Junior Series, the unit is a powerful 100W effect lights, Plug & play

and easy to use, any where enjoys the pleasurable light show. Selector switch for 3 sets of auto,

sound activation or static function mode to dynamic emotion applications. Junior series without

any duty cycle, equip with super cooling fan built up a fantastic light show to dancing all night.

Safety with thermo switch ensures auto power disconnection when errors or defects happen.

This fixture is perfect for clubs, pubs, bars, parties, and mobile DJs.

Junior series

for

Hallucination, Fascination and Orbiter

7TABLE OF CONTENTS

Introduction...…………………………………………………………………………………………….2

Safety Instruction………………………………………………………………………………………..4

Description..……………………………………………………………………………………………..5

Operation and Technical Specification..……………………………………………………………….7

Installation.……………………………………………………………………………………………….7

Exchange Lamp.………………………………………………………………………………………..8

Exchanging Rotating Gobos.………………………………………………………………………….10

Exchange Fuse.………………………………………………………………………………………..12

Troubleshooting………………………………………………………………………………………..13

Fixture Cleaning.……………………………………………………………………………………….14

1Safety Instruction

Please read carefully the instruction which includes important information

WARNING about the installation, usage and maintenance.

Please keep this User Manual for future consultation.

Unpack and check carefully there is no transportation damage before using the unit.

Before operating, ensure that the voltage and frequency of power supply match the power

requirements of the unit.

The unit is for indoor use only and only in a dry location.

Disconnect mains power before fuse/lamp replacement or servicing.

Replace fuse/lamp only with the same type.

Make sure there are no flammable materials close to the unit while operating as it is fire

hazard.

Maximum ambient temperature is TA: 40℃. Don’t operate it where the temperature is higher

than this.

Turn off the power and allow about 15 minutes for the unit to cool down before replacing bulb

or serving.

In the event of serious operating problem, stop using the unit immediately. Never try to repair

the unit by yourself. Repairs carried out by unskilled people can lead to damage or

malfunction. Please contact the nearest authorized technical assistance center. Always use

the same type spare parts.

Do not touch any wire during operation as high voltage might be causing electric shock.

9Warning

To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or

moisture.

Never touch bulb with bare fingers as it is very hot after using.

Hot lamp explosion hazard. Do not open the unit within five minutes after switching off.

Do not start on the unit without bulb enclosure or housing is damaged.

The housing, the lenses must be replaced if they are visibly damaged.

Do not look directly at the light while the bulb is on.

10Caution

There are no user serviceable parts inside the unit. Do not open the housing or attempt any

repairs by yourself.

11Rigging the fixtures

The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is

firmly fixed to avoid vibration and slipping while operating. Always ensure that the structure to

which you are attaching the unit is secure and is able to support a weight of 10 times of the unit’s

weight. Also always use a safety cable that can hold 12 times of the weight of the unit when

installing the fixture.

Description

1. Optical lens with manual focus adjustment

2. Hanging bracket with one knob to fasten the unit

3. Power cord comet only to a matching power outlet

4. Build-in fuse

5. Lamp accessory door

6. Internal microphone

7. Cooling fan

8. Reflector mirror

9. Selector switch to select between auto, sound activation or static function

2Operation and Technical Specification

•Plugging into the mains power and it will start running. The unit runs in automatic, sound

activated or static mode.

•Focus adjustable by manual.

Specification:

•Voltage: AC 120V 60Hz (US)

AC 230V /240V /250V 50Hz / 60Hz (EU)

•Fuse: 20 mm glass 120V T5A (US)

20 mm glass 250V T3.15A (EU)

•Lamp: EFP 12V 100W

•Dimension: 266 X 142 X 144 mm

•Weight: 1.7 kgs

Installation

The unit could be mounted on the wall or under ceiling. If the buyer installs the unit under

ceiling, please use a clamp (optional) to fix the unit under ceiling. Always ensures that the unit is

firmly fixed to avoid vibration and slipping while operating. Always ensures that the structure to

which you are attaching the unit is secure.

3Exchange Lamp

DANGER!

In case of replacement of the lamp, do not open the lamp accessory door

within 15 minutes until the unit cools down after switching off.

LAMP: EFP 12V 100W

1.Always switch off the main supply and never handle the lamp or luminaries when is hot.

2.Do not touch the bulb with bare hands. If this happens, clean the lamp with denatured

alcohol and wipe it with a lint free cloth before installation.

3.Never operate the lamp without appropriate shielding.

4. Make sure the lamp is located in the center for the best spot.

1. Unscrew the screw from the lamp accessory door

2. Remove the cover

3. Take off the lamp with carefully

4. Replace the new lamp

5. Push gently with thumb and make sure the lamp

was located on the central zone with tight for

best light effects.

6．Reverse step 2 to step 1.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Equipo de DJ de ACME

ACME

ACME LED WAVE 100 Manual de usuario

ACME

ACME IM-5S-ELC Manual de usuario

ACME

ACME ENERGY HYBRID Manual de usuario

ACME

ACME MINI ELLIPSOIDAL 10 Manual de usuario

ACME

ACME IU-01 Manual de usuario

ACME

ACME GENESIS COLOR II Manual de usuario

ACME

ACME THUNDERBOLT Manual de usuario

ACME

ACME LED-Exercet Manual de usuario

ACME

ACME Festival LED-787 Manual de usuario

ACME

ACME LED-MTX25 IP Manual de usuario

ACME

ACME XA-500 Manual de usuario

ACME

ACME CHEETAH LED-GF50 Manual de usuario

ACME

ACME E-10C WW DXX Manual de usuario

ACME

ACME LED-RC8 Manual de usuario

ACME

ACME Dotline 360 Manual de usuario

ACME

ACME PAGEANT 300ZR II Manual de usuario

ACME

ACME Ellipsoidal E-300 D2550 Manual de usuario

ACME

ACME RAYZOR HYBRID XA-100 BSW Manual de usuario

ACME

ACME LED-635S Manual de usuario

ACME

ACME Spartan Hybrid Manual de usuario

ACME

ACME LED?7TC Manual de usuario

ACME

ACME LED-PAR 100 WW/CW Manual de usuario

ACME

ACME Color Spot Manual de usuario

ACME

ACME Ellipsoidal Manual de usuario

Manuales populares de Equipo de DJ de otras marcas

ALPHA LITE

ALPHA LITE ALPHA 1500 Manual del propietario

Chauvet

Chauvet OVATION E-930VW Manual de usuario

Zumtobel

Zumtobel APHRODITE Home Manual de usuario

Snow Masters

Snow Masters Zig Oscillator Manual de usuario

EuroLite

EuroLite 50530554 Manual de usuario

Beamz

Beamz BUV243 Manual de usuario

thomann

thomann Stairville DJ Lase 40-G MK-III Manual de usuario

Eagletone

Eagletone 6 Eyes Flower Manual de usuario

EuroLite

EuroLite FLD-1508 Manual de usuario

Technical Pro

Technical Pro LG8xSEA Manual de usuario

JB Systems

JB Systems Lounge Laser DMX Manual de usuario

Lightmaxx

Lightmaxx Vega Halo 90 Manual de usuario

Elation

Elation FUZE WASH Z350 Manual de usuario

Maverick

Maverick MK3 WASH Manual de usuario

Infinity

Infinity TF-260C7 Fresnel Manual de usuario

Chauvet

Chauvet EVE E-50Z Manual de usuario

Eliminator Lighting

Eliminator Lighting E 138 Manual de usuario

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manual de usuario