ZyXEL Communications PRESTIGE 128 Manual de usuario

Prestige 128

User’s Manual

Version 2.0

JiH5<

ACCESSING INTERNET & INTRANET

ZyXEL Limited Warranty

ZyXEL warrants to the original end user (purchaser) that this

product is free from any defects in materials or workmanship for a

period of up to two (2) years from the date of purchase. During the

warranty period, and upon proof of purchase, should the product

have indications of failure due to faulty workmanship and/or

materials, ZyXEL will, at its discretion, repair or replace the

defective products or components without charge for either parts

or labor, and to whatever extent it shall deem necessary to restore

the product or components to proper operating condition. Any

replacement will consist of a new or re-manufactured functionally

equivalent product of equal value, and will be solely at the

discretion of ZyXEL. This warranty shall not apply if the product is

modified, misused, tampered with, damaged by an act of God, or

subjected to abnormal working conditions.

Note: Repair or replacement, as provided under this warranty, is

the exclusive remedy of the purchaser. This warranty is in lieu of

all other warranties, express or implied, including any implied

warranty of merchantability or fitness for a particular use or

purpose. ZyXEL shall in no event be held liable for indirect or

consequential damages of any kind or character to the purchaser.

To obtain the services of this warranty, contact ZyXEL’s Service

Center, refer to the separate Warranty Card for your Return

Material Authorization number (RMA). Products must be returned

Postage Prepaid. It is recommended that the unit be insured when

shipped. Any returned products without proof of purchase or those

with an out-dated warranty will be repaired or replaced (at the

discretion of ZyXEL) and the customer will be billed for parts and

labor. All repaired or replaced products will be shipped by ZyXEL

to the corresponding return address, Postage Paid (USA and

territories only). If the customer desires some other return

destination beyond the U.S. borders, the customer shall bear the

cost of the return shipment. This warranty gives you specific legal

iii

rights, and you may also have other rights which vary from state to

state.

The contents of this book may not be reproduced (in any part or as

a whole) or transmitted in any form or by any means without the

written permission of the publisher.

Published by ZyXEL Communications Corporation. All rights

reserved.

Note: ZyXEL does not assume any liability arising out of the

application or use of any products, or software described herein.

Neither does it convey any license under its patent rights nor the

patents rights of others. ZyXEL further reserves the right to make

changes in any products described herein without notice. This

document is subject to change without notice.

Acknowledgments

Trademarks mentioned in this manual are used for informational

purposes only.

Trademarks are properties of their respective owners.

FCC Part 15 Information

This device complies with Part 15 of FCC rules. Operation is

subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including

interference that may cause undesired operations.

This equipment has been tested and found to comply with the limits

for a CLASS B digital device pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy, and if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications.

If this equipment does cause harmful interference to

radio/television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the

receiver.

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for

help.

Changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to

operate the equipment. Shielded RS-232 cables are required to be

used to ensure compliance with FCC Part 15, and it is the

responsibility of the user to provide and use shielded RS-232

cables.

Information for Canadian Users

The Industry Canada label identifies certified equipment. This

certification means that the equipment meets certain

telecommunications network protective, operation, and safety

requirements. The Industry Canada does not guarantee that the

equipment will operate to a user’s satisfaction.

Before installing this equipment, users should ensure that it is

permissible to be connected to the facilities of the local

telecommunications company. The equipment must also be

installed using an acceptable method of connection. In some cases,

the company’s inside wiring associated with a single line individual

service may be extended by means of a certified connector

assembly. The customer should be aware that the compliance with

the above conditions may not prevent degradation of service in

some situations.

Repairs to certified equipment should be made by an authorized

Canadian maintenance facility designated by the supplier. Any

repairs or alterations made by the user to this equipment, or

equipment malfunctions, may give the telecommunications

company cause to request the user to disconnect the equipment.

For their own protection, users should ensure that the electrical

ground connections of the power utility, telephone lines, and

internal metallic water pipe system, if present, are connected

together. This precaution may be particularly important in rural

areas.

Caution: Users should not attempt to make such connections

themselves, but should contact the appropriate electrical

inspection authority, or electrician, as appropriate.

This digital apparatus does not exceed the class A limits for radio

noise emissions from digital apparatus set out in the radio

interference regulations of Industry Canada. The declarations of

CE marking:

The Prestige 128 has been approved for connection to the Public

Switched Telecommunication Network using interfaces compatible

with ITU-TSS recommendation I.420 (Basic Rate ISDN user

access). The Prestige 128 complies with the following directives:

1. The Council Directive 89/336/EEC of 3 May 1992 on the

approximation of the laws of the member states relation to

Electro Magnetic Compatibility. (EMC Directive)

2. Council Directive 91/263/EEC of 29 April 1991 on the

approximation of the laws of the Member States concerning

telecommunication terminal equipment. (The Telecom

Terminal Equipment Directive)

3. 93/68/EEC of 22 July 1993 amending the Directives

89/336/EEC, 91/263 /EEC and 92/31/EEC.(Marking Directive)

4. The Council Directive 92/31/EEC of 28 April 1992 amending

directive on the approximation of the laws of the member states

relating to EletoMagnetic Compatibility.

Contacting ZyXEL

If you have questions about your ZyXEL product or desire

assistance, contact ZyXEL Communications Corporation in one of

the following ways:

• Phone: In North America call between 8:00 AM and 5:00 PM

PST at (714) 693-0808

Outside North America, you can dial +886-3-5783942 EXT

252 between 8:00AM and 5:00PM Taiwan time (GMT +8:00).

• Fax: ZyXEL in North America: (714) 693-8811 or Taiwan:

+886-3-5782439

• E-mail:

• Sales inquiries: [email protected] in North America.

[email protected] outside North America.

vii

• Technical support: [email protected] in North America.

[email protected] outside North America.

• Product information: Visit our site on the World Wide Web:

http://www.zyxel.com.

• FTP: Information , such as ZyXEL software and ROM updates

for North America can be found at this FTP address:

ftp.zyxel.com

For European and Asian versions and related files, use the

address: ftp.zyxel.co.at

• Postal Service: You can send written communications at the

following address:

ZyXEL Communications Corporation

6, Innovation Road II, Science-Based Industrial Park

Hsinchu, Taiwan 300, R.O.C.

ZyXEL Communications Inc.

4920 E. La Palma Avenue

Anaheim, CA92807, U.S.A.

viii

Contents

ZyXEL Limited Warranty ii

Acknowledgments iii

FCC Part 15 Information iii

Information for Canadian Users iv

Contacting ZyXEL vi

1Introduction 1

Features 1

Ease of Installation 1

ISDN Basic Rate Interface (BRI) 2

Multiple Networking Protocol Support 2

Standard Phone Jack 2

Dial On Demand 2

Bandwidth On Demand 2

Full Network Management 3

RADIUS (Remote Authentication Dial In User Service) 3

PPP Security 3

DHCP Support (Dynamic Host Configuration Protocol) 3

Call Control 3

Data Compression 4

Networking Compatibility 4

Applications For Your Prestige 4

Internet Access 4

Internet Single User Account (SUA) 4

Multiprotocol LAN-to-LAN Connection 4

Telecommuting Server 5

What This Manual Covers 5

What This Manual Doesn’t Cover 6

Other Resources 6

Packing List 6

Additional Installation Requirements 7

2Before You Begin 9

Road Map and Flow 9

Completing the Worksheet 10

Ordering Your ISDN Line 11

Collecting General Setup Information 11

Collecting ISDN Phone Line Information 12

Collecting Ethernet Setup Information 14

3Installation 21

A Warning On Connection Cables 21

Connecting Your Computer and Your Prestige 21

Connecting the RS-232 Cable to your Prestige 22

Connecting an ISDN Line to your Prestige 22

Connecting a Telephone/Fax to your Prestige 22

Connecting an Ethernet Cable to your Prestige 23

Connecting a Power Adapter to your Prestige 24

Prestige Front Panel 24

Powering On Your Prestige 25

Navigating Through the System Management Terminal

Interface 26

System Management Terminal Interface Summary 28

General Setup 29

ISDN Setup 30

North American ISDN 30

DSS1 & 1TR6 ISDN 32

Ethernet Setup 35

General Ethernet Setup 35

TCP/IP Ethernet Setup and DHCP 36

Novell IPX Ethernet Setup 39

Bridge Ethernet Setup 39

4Configuring for Internet Access 40

IP Addresses and the Internet 41

Internet Access Configuration 42

Single User Account 44

Configuration for Single User Account 46

Configuring Backup ISP Accounts 47

5Remote Node Configuration 50

Bandwidth on Demand 56

Editing PPP Options 57

6Dial-In Configuration 60

Telecommuting 61

Dial-In Server Application 61

Default Dial-In Setup 62

Dial-In Users Setup 66

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad