ZyXEL Communications C4000LZ Manual de usuario

C4000LZ

Dual-Band Wireless AX VDSL2 Gigabit

Gateway

Version 1.1

Edition 1, 01/2020

Default Login Details

LAN IP Address

http://192.168.0.1

User Name

admin

Password

Check the device label

Quick Start Guide

LED LIGHT /

WPS BUTTON

Device Panels

USB SLOT

ETHERNET

PORTS 1-4

PORT

DSL LED

DSL PORT

RESET

Overview

The Device is a Wi-Fi 802.11ax 4-port combo WAN VDSL gateway. The

Device allows wired and wireless clients to safely access the Internet.

Additionally, the Device includes a Gigabit Ethernet LAN port that can

also serve as a WAN connection to support a dual WAN function. The

USB port allows you to connect a USB memory stick or USB hard drive

for storing or sharing files through the network.

Requirements

Make sure you have the following things before you start.

•

Internet access - account information provided by your ISP,such as

user name, password, and so on.

•

A browser that supports HTML5, such as Internet Explorer 11,

Mozilla Firefox, or Google Chrome.

Hardware Connections

Use a telephone cable to connect your Device’s DSL port to a

telephone jack (or the DSL or modem jack on a splitter if youhave

one).

ETHERNET: Use an Ethernet cable to connect a computer to aLAN

port for initial configuration and/or Internet access.

USB: You can connect a USB memory stick or a USB harddrive for

file sharing. The Device automatically detects the USB device.

Alternatively, use a USB cable (not provided) to connect a USB

printer to this port.

POWER: Use the provided power adaptor to connect the POWER

socket to an appropriate power source. Make sure the power atthe

outlet is on. Look at the LED lights on the front and rearpanels.

•

The front LED light blinks while your Device starts up and issolid

blue once it is ready.

•

The DSL light on the rear panel is solid green after your Devicehas

a DSL connection.

•

Each ETHERNET light is on if the corresponding LAN port is

properly connected and blinks when there is traffic.

•

The front LED light blinks white whenWPS is enabled and blinks

white/green while WPS is in process.

If the lights do not come on, check your connections and inspect your cables

for damage. If the lights are still off, contact technical support.

Internet Connection Setup

Your Device can automatically detect and configure your Internet

connection once the hardware is connected properly.

Automatic Connection

Open your web browser to a website. Wait while your Device triesto

detect your DSL connection to your ISP. This may take a few

minutes.

After it detects the connection, the DSL light and front LED lightare

green on your Device and it is ready for you to use. If you have a

PPPoE connection, you will have to enter the user name and

password provided by your ISP.

Go toSet Up aWireless Network if you wish to configure your

wireless settings.

If the automatic connection is not successful,check yourconnections

and restart the Device. Also, make sure you have entered the user

name and password correctly. If you still cannot access the Internet,

follow the steps in the next section to manuallyconfigure the Internet

connection.

Manual Connection

You can also manually log into the Device’s Web Configurator and

configure the Internet connection.

In your browser, if the Device does not automatically re-direct you to

the login screen, go to http://192.168.0.1.

Enter the default user name admin and password (see theDevice’s

label). Click Apply.

If the login screen does not open, make sure you allow web browser pop-up

windows, JavaScripts and Java permissions. Your computer should be also

set to get an IP address automatically from a DHCP server.

The main screen appears. Click Quick Setup to configurethe

Device’s Internet access.

Enter the user name and password provided by your ISP.Click Apply

to finish the configuration.

The DSL light and front LED light are green on your Device when the

Internet is readyfor you to use. If you still cannot access the Internet,

contact your ISP.

Set Up a Wireless Network

You can set up a wireless network using the following methods:

Using Wireless Protected Setup (WPS)

Press the WPS button on the Device’s front panel for more than 5

seconds to turn the WPS function on.

Follow these steps to add a WPS-enabled device to the wireless

network using the WPS button.

Place the devices you

want to connect near one

another.

Press theWPS button on

the Device.

Press theWPS button on

a compatible device

within 2 minutes of

pressing the button on

the Device.

The front LED light on

the Device blinks white

when connection is in

progressandblinkswhite

and green when

connected.

Set Up a Wireless Network Manually

The wireless LAN on your Device is enabled by default. To add a

wireless client tothenetwork, usethesettings found on the bottom panel

of your Device.

Configure wireless devices that you want to connect to the wireless

network to use the same wireless settings as the Device.

The default wireless settings vary for each Device. Refer to the label of

your Device and use the provided information.

Tabla de contenidos

Otros manuales de Puerta de ZyXEL Communications

ZyXEL Communications

ZyXEL Communications 802.11g HomePlug AV ADSL2+ Gateway... Manual de usuario

ZyXEL Communications

ZyXEL Communications P-660H-D Series Manual de usuario

ZyXEL Communications

ZyXEL Communications ZYAIR Manual de usuario

ZyXEL Communications

ZyXEL Communications VMG1312-T10C Manual de usuario

ZyXEL Communications

ZyXEL Communications VMG1312-BX0D Manual de usuario

ZyXEL Communications

ZyXEL Communications ZYAIR B-4000 Manual de usuario

ZyXEL Communications

ZyXEL Communications EMG2926-Q10A Manual de usuario

ZyXEL Communications

ZyXEL Communications ZyXEL Prestige 660R Manual de usuario

ZyXEL Communications

ZyXEL Communications VMG3625-T50B Manual de usuario

ZyXEL Communications

ZyXEL Communications ZyWall USG20-VPN Manual de usuario

ZyXEL Communications

ZyXEL Communications ZyXEL ZYWALL10 Manual de usuario

ZyXEL Communications

ZyXEL Communications P-793H v3 Manual de usuario

ZyXEL Communications

ZyXEL Communications P-660HW Series Manual de usuario

ZyXEL Communications

ZyXEL Communications ISG50 Instrucciones de instalación y funcionamiento

ZyXEL Communications

ZyXEL Communications ZyXEL ZyWALL 50 Manual de usuario

ZyXEL Communications

ZyXEL Communications P-660HW-Tx v3 Series Manual de usuario

ZyXEL Communications

ZyXEL Communications Prestige 662HW Series Manual de usuario

ZyXEL Communications

ZyXEL Communications ZyWall1 Manual de usuario

ZyXEL Communications

ZyXEL Communications ZYAIR B-2000 Manual de usuario

ZyXEL Communications

ZyXEL Communications ZYWALL USG 20W Manual de usuario

ZyXEL Communications

ZyXEL Communications P-662H-61 Guía de referencia

ZyXEL Communications

ZyXEL Communications VMG4927-B50A Manual de usuario

ZyXEL Communications

ZyXEL Communications P-661HNU-FX Manual

ZyXEL Communications

ZyXEL Communications NSG50 Manual de usuario

Manuales populares de Puerta de otras marcas

LST

LST M500RFE-AS Manual de usuario

Kinnex

Kinnex Media Gateway Manual de usuario

2N Telekomunikace

2N Telekomunikace 2N StarGate Manual de usuario

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manual de usuario

Telsey

Telsey CPVA 500 - SIP Manual de usuario

RTA

RTA 460A-NNA4 Hoja de especificaciones

Shaw

Shaw Gateway HDPVR Manual de usuario

ABB

ABB VSN900 Guía de inicio rápido

Commander

Commander Pulse Manual de usuario

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manual de usuario

NETGEAR

NETGEAR C6300BD Manual de usuario

Amit

Amit CDW531AM Manual de usuario

HMS

HMS Netbiter EasyConnect EC150 Manual de usuario

Huawei

Huawei EchoLife HG620 Manual de usuario

AT&T

AT&T U-verse 3801 Manual de uso y cuidado

Logic IO

Logic IO RTCU MX2 turbo Manual de usuario

Suttle

Suttle MediaMAX MXM-521 Manual de usuario

RTA

RTA 460MCBC-N2E Hoja de especificaciones