ZyXEL Communications ZYAIR B-4000 Manual de usuario

ZyAIR B-4000

Hot Spot Gateway

Quick Installation Guide

Version 1.04

March 2004

ZyAIR B-4000

Table of Contents

1 Introducing the ZyAIR .................................................................................................................. 3

1.1 Rear Panel Connections............................................................................................................. 3

1.2 The Front Panel LEDs............................................................................................................... 3

1.3 Factory Defaults ........................................................................................................................ 4

2 Setting Up Your Computer’s IP Address..................................................................................... 5

2.1 Windows 2000/NT/XP .............................................................................................................. 5

2.2 Checking/Updating Your Computer’s IP Address .................................................................... 6

2.3 Testing the Connection to the ZyAIR........................................................................................ 6

3 Configuring Your ZyAIR .............................................................................................................. 7

3.1 Accessing Your ZyAIR Via Web Configurator ........................................................................ 7

3.2 Internet Connection Wizard ...................................................................................................... 8

3.3 Introducing the Web Configurator .......................................................................................... 18

3.4 Resetting the ZyAIR................................................................................................................ 19

3.5 Test Your Internet Connection ................................................................................................ 20

4 Hardware Installation.................................................................................................................. 20

4.1 Desktop Installation................................................................................................................. 20

4.2 Wall-mount Installation........................................................................................................... 21

4.3 Attaching Antennas ................................................................................................................. 21

5 Troubleshooting............................................................................................................................ 22

ZyAIR B-4000

1 Introducing the ZyAIR

The ZyAIR Hot Spot Gateway combines an 802.11b wireless access point, router, 4-port switch and

service gateway in one box. An “exclusive printer” connects directly to the ZyAIR, allowing you to

easily print subscriber statements. The ZyAIR is ideal for offices, coffee shops, libraries, hotels and

airport terminals catering to subscribers that seek Internet access. You should have an Internet

account already set up and have been given usernames, passwords etc. required for Internet access.

1.1 Rear Panel Connections

Figure 1 ZyAIR Rear Panel

Table 1 Rear Panel Connections

LABEL DESCRIPTION

ONE-CLICK

PRINTER

Use the printer cable to connect the included printer (“exclusive printer”) to this port.

WAN Connect your broadband modem to this port with the Ethernet cable that came with your

modem.

LAN 1-4 These ports are auto-crossover, (”auto MDI/MDI-X”) which means you can use either a

straight-through or crossover Ethernet cable to connect the ZyAIR to a computer or a hub.

Power After you’ve made the above connections, connect the ZyAIR’s included power adaptor to

the ZyAIR’s power socket. Use only the included power adaptor. The PWR LED turns on.

The SYS LED blinks while performing system testing and then turns steady on if the

testing is successful. A LAN LED turns on if a LAN port is properly connected. Refer to the

following table for more detailed LED descriptions.

1.2 The Front Panel LEDs

ZyAIR B-4000

Figure 2 ZyAIR Front Panel

Table 2 Front Panel LEDs

LED STATUS DESCRIPTION

PWR On (Green) The ZyAIR is receiving power.

Off The ZyAIR is not receiving power.

WAN On (Green) The WAN port has a connection to your cable or DSL modem.

Blinking (Green) The WAN port is sending or receiving packets.

Off The WAN link is not ready, or has failed.

LAN (1-4) On (Green) The port is connected to a 10/100Mbps Ethernet device.

Blinking (Green) The port is receiving or sending data.

Off The port is not connected to a 10/100Mbps Ethernet device.

WIRELESS On (Green) The ZyAIR has established a wireless LAN connection.

Blinking (Green) The ZyAIR is sending/receiving data through the wireless LAN.

SYS On (Green) The ZyAIR is ready and running.

Blinking (Green) The ZyAIR is upgrading its firmware.

Off The ZyAIR is not ready or has failed.

1.3 Factory Defaults

Table 3 Factory Defaults

Username “admin” (case sensitive) WAN IP Address DHCP Client (dynamic WAN IP)

Password “1234” LAN IP Address 192.168.1.1

LAN DHCP Server

ZyAIR B-4000

2 Setting Up Your Computer’s IP Address

Skip this section if your computer is already set up to accept a dynamic IP

address. This is the default for most new computers.

The ZyAIR is already set up to assign your computer an IP address. Use this section to set up your

computer to receive an IP address or assign it a static IP address in the 192.168.1.2 to 192.168.1.254

range with a subnet mask of 255.255.255.0. This is necessary to ensure that your computer can

communicate with your ZyAIR.

Your computer must have an Ethernet card and TCP/IP installed. TCP/IP should already be installed

on computers using Windows NT/2000/XP, Macintosh OS 7 and later operating systems.

2.1 Windows 2000/NT/XP

1. In Windows XP, click start, Control Panel. In Windows 2000/NT, click Start, Settings, Control Panel.

2. In Windows XP, click Network Connections.

In Windows 2000/NT, click Network and Dial-up Connections.

3. Right-click Local Area Connection and then click Properties.

4. Select Internet Protocol (TCP/IP) (under the General tab in Win XP) and click Properties.

5. The Internet Protocol TCP/IP Properties screen

opens (the General tab in Windows XP).

- To have your computer assigned a dynamic IP

address, click Obtain an IP address automatically.

If you know your DNS sever IP address(es), type them

in the Preferred DNS server and/or Alternate DNS

server fields.

-To configure a static IP address, click Use the

following IP Address and fill in the IP address

(choose one from192.168.1.2 to 192.168.1.254),

Subnet mask (255.255.255.0), and Default gateway

(192.168.1.1) fields.

Then enter your DNS server IP address(es) in the

Preferred DNS server and/or Alternate DNS server

fields.

If you have more than two DNS servers, click

Advanced, the DNS tab and then configure them using

Add.

ZyAIR B-4000

6. Click Advanced. Remove any previously installed

gateways in the IP Settings tab and click OK to go back

to the Internet Protocol TCP/IP Properties screen.

7. Click OK to close the Internet Protocol (TCP/IP)

Properties window.

8. Click OK to close the Local Area Connection

Properties window.

2.2 Checking/Updating Your Computer’s IP Address

1. In the computer, click Start, (All) Programs, Accessories and then Command Prompt.

2. In the Command Prompt window, type "ipconfig" and then press ENTER to verify that your computer’s IP

address is in the correct range (192.168.1.2 to 192.168.1.255) with subnet mask 255.255.255.0. This is

necessary in order to communicate with the ZyAIR.

Refer to your User’s Guide for detailed IP address configuration for other Windows and Macintosh

computer operating systems.

2.3 Testing the Connection to the ZyAIR

1. Click Start, (All) Programs, Accessories and then Command Prompt.

2. In the Command Prompt window, type "ping” followed by a space and the IP address of the ZyAIR

(192.168.1.1 is the default).

ZyAIR B-4000

3. Press ENTER and the following screen displays.

Your computer can now communicate with the ZyAIR using a LAN port.

3 Configuring Your ZyAIR

This guide shows you how to use the web configurator for initial

configuration. See your User’s Guide for background information on all

other ZyAIR features.

3.1 Accessing Your ZyAIR Via Web Configurator

1. Your web browser must have JavaScript support enabled. Launch your web browser. Enter

“192.168.1.1” as the web site address.

Figure 3 Entering ZyAIR LAN IP Address in Internet Explorer

2. A login screen displays. Enter the user name (“admin” is the default), password (“1234” is the

default) and click Getting Started. The user name is case sensitive, so enter “admin” exactly

as shown. If you make an incorrect entry, refresh your browser and try again. Only one

administrator can log in at one time. The ZyAIR logs you out after five minutes of no

management using the web configurator, so you then have to log in again.

Web site address

C:\>ping 192.168.1.1

Pinging 192.168.1.1 with 32 bytes of data:

Reply from 192.168.1.1: bytes=32 time=10ms TTL=254

Reply from 192.168.1.1: bytes=32 time<10ms TTL=254

Ping statistics for 192.168.1.1:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 10ms, Average = 2ms

ZyAIR B-4000

Figure 4 Web Configurator: Login Screen

3.2 Internet Connection Wizard

The Wizard Setup screens appear by default after login only the first time you access the ZyAIR and

run the wizard. After that, the SYSTEM QUICK VIEW screen appears after login.

1. The first Wizard screen displays after your initial login. This first screen varies depending on

the type of Internet connection you use.

Figure 5 Internet Connection: DHCP Client

Select DHCP Client if your ISP did not assign

you a fixed IP address. Your ISP assigns the

ZyAIR’s WAN port a dynamic IP address. This is

the default selection.

Click Next to continue to Figure 9.

ZyAIR B-4000

Figure 6 Internet Connection: Static_IP

Select Static_IP If the ISP assigned a fixed IP

address.

Enter the WAN IP address, subnet mask,

gateway IP address and DNS server address(s)

that your ISP assigned you.

Click Next to continue to Figure 9.

Figure 7 Internet Connection: PPPoE

Select PPPoE If the ISP uses PPPoE for your

account (PPPoE simulates a dial-up connection).

Enter the user name and password exactly as

your ISP assigned them.

A maximum transmission unit (MTU) is the

largest size packet or frame, specified in octets

(eight-bit bytes) that can be sent in a packet- or

frame-based network. The Transmission Control

Protocol (TCP) uses the MTU to determine the

maximum size of each packet in a transmission.

Too large an MTU size may mean

retransmissions if the packet encounters a router

that can't handle that large a packet. Too small

an MTU size means relatively more header

overhead and more acknowledgements that

have to be sent and handled.

The maximum segment size (MSS) is the largest

amount of data, specified in bytes, that a

computer or communications device can handle

in a single, unfragmented piece.

For optimum communications, the number of bytes in the data segment and the header must add up to less than

the number of bytes in the maximum transmission unit (MTU).

Enter the name of your PPPoE server, in the Service Name field if provided; otherwise leave it blank.

Select Connect on Demand when you don't want an “always-on” connection and specify an inactivity time limit

(in minutes) in the Max Idle Time field.

Select Keep Alive if you want an “always-on” connection. The Redial Period is how long the ZyAIR waits before

reconnecting in the event of a disconnect. Click Next to continue to Figure 9.

ZyAIR B-4000

Figure 8 Internet Connection: PPTP

Select PPTP if your service provider uses a DSL

terminator with PPTP login. The ZyAIR must

have a static IP address (My IP Address) in this

case, and a subnet mask (My IP Subnet Mask)

if provided by your ISP.

Enter the DSL terminator IP address (PPTP

Server IP Address) and a username with an

associated password.

See the description of the PPPoE encapsulation

screen for information on PPP MTU, TCP MSS,

Connect On Demand and Keep alive.

If your ISP has provided a connection ID name,

enter it in the Connection ID/Name field.

Click Next to continue to Figure 9.

2. Use the second wizard screen to set up the wireless LAN.

Figure 9 Wireless Settings

ESSID is a unique name to identify the ZyAIR

in the wireless LAN. Enter a descriptive name.

Select a channel (range of radio frequencies

used by IEEE 802.11b wireless devices) from

the drop-down list box.

WEP (Wired Equivalent Privacy) encrypts

data frames before transmitting them over the

wireless network.

Select 64 Bit, 128 Bit or 256 Bit from the

WEP Encryption and enter a key of the

appropriate length to activate WEP

encryption. Select Disable to turn off WEP

data encryption.

Click Next to continue.

Otros manuales para ZYAIR B-4000

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Puerta de ZyXEL Communications

ZyXEL Communications

ZyXEL Communications P-660H-Tx v2 Series Manual de usuario

ZyXEL Communications

ZyXEL Communications ZYWALL USG 20 Manual de usuario

ZyXEL Communications

ZyXEL Communications P-660H Series Manual de usuario

ZyXEL Communications

ZyXEL Communications P-660HNU-F1 Manual de usuario

ZyXEL Communications

ZyXEL Communications ZyWall1 Manual de usuario

ZyXEL Communications

ZyXEL Communications P-661HW-D Series Manual de usuario

ZyXEL Communications

ZyXEL Communications SBG3300 series Manual de usuario

ZyXEL Communications

ZyXEL Communications P-660HW-D1 V2 Manual de usuario

ZyXEL Communications

ZyXEL Communications MAX218M Instrucciones de instalación

ZyXEL Communications

ZyXEL Communications ZyXEL ZyWALL 10W Manual de usuario

ZyXEL Communications

ZyXEL Communications ADSL2+ 4-port Gateway P-660H-D Series Manual de usuario

ZyXEL Communications

ZyXEL Communications UAG5100 Manual de usuario

ZyXEL Communications

ZyXEL Communications P-870HN-5xb Manual de usuario

ZyXEL Communications

ZyXEL Communications ADSL2+ 4-port Gateway P-660H-D Series Manual de usuario

ZyXEL Communications

ZyXEL Communications VSG1435-B101 Manual de usuario

ZyXEL Communications

ZyXEL Communications VMG3312-T20A Manual de usuario

ZyXEL Communications

ZyXEL Communications ZYWALL USG CLI Manual de usuario

ZyXEL Communications

ZyXEL Communications ZyWALL USG 100 Series Manual de instrucciones

ZyXEL Communications

ZyXEL Communications ZyXEL ZyWALL USG-1000 Manual de usuario

ZyXEL Communications

ZyXEL Communications ZyXEL Prestige 660R Manual de usuario

ZyXEL Communications

ZyXEL Communications ZYWALL P1 - V3.64 Manual de usuario

ZyXEL Communications

ZyXEL Communications USG-300 - V2.20 ED 2 Manual de usuario

ZyXEL Communications

ZyXEL Communications EMG6765-Q10A Manual de usuario

ZyXEL Communications

ZyXEL Communications SBG3500-N Series Manual de usuario

Manuales populares de Puerta de otras marcas

LST

LST M500RFE-AS Manual de usuario

Kinnex

Kinnex Media Gateway Manual de usuario

2N Telekomunikace

2N Telekomunikace 2N StarGate Manual de usuario

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manual de usuario

Telsey

Telsey CPVA 500 - SIP Manual de usuario

RTA

RTA 460A-NNA4 Hoja de especificaciones

Shaw

Shaw Gateway HDPVR Manual de usuario

ABB

ABB VSN900 Guía de inicio rápido

Commander

Commander Pulse Manual de usuario

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manual de usuario

NETGEAR

NETGEAR C6300BD Manual de usuario

Amit

Amit CDW531AM Manual de usuario

HMS

HMS Netbiter EasyConnect EC150 Manual de usuario

Huawei

Huawei EchoLife HG620 Manual de usuario

AT&T

AT&T U-verse 3801 Manual de uso y cuidado

Logic IO

Logic IO RTCU MX2 turbo Manual de usuario

Suttle

Suttle MediaMAX MXM-521 Manual de usuario

RTA

RTA 460MCBC-N2E Hoja de especificaciones