Zte MF91D Manual de usuario

Otros manuales para MF91D

1

Tabla de contenidos

Idiomas:

Manuales populares de Enrutador inalámbrico de otras marcas

Milesight

Milesight UG67 Manual de usuario

Airlogic

Airlogic AirSync Class 1 Manual del propietario

Samsung

Samsung WCH730B Manual de usuario

TELEFONICA

TELEFONICA USB Adapter Manual de usuario

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Manual de usuario

Askey

Askey RAC2V1K Manual de usuario

Alloy

Alloy WLF2454AP-S Manual de usuario

TP-Link

TP-Link TL-WR542G Manual de usuario

NETGEAR

NETGEAR WNR2000v4 Manual de usuario

Hama

Hama 53120 Manual de usuario

Intellinet

Intellinet 524582 Manual de usuario

Asus

Asus RT-N10P Manual de usuario

D-Link

D-Link DIR-506L Manual de usuario

Sapido

Sapido GR297n Manual de usuario

Asus

Asus DSL-N55U Manual de usuario

AMTC

AMTC WR7502 Manual de usuario

Compaq

Compaq CP-2W - iPAQ Connection Point Manual de usuario

SMC Networks

SMC Networks WBR14-N2 FICHE Manual de usuario

ZTE MF91D

Let’s go

Getting started with your device.

ZTE CORPORATION

NO. 55, Hi-tech Road South, ShenZhen, P.R.China

Postcode: 518057

2

LEGAL INFORMATION

Copyright © 2013 ZTE CORPORATION.

All rights reserved.

No part of this publication may be excerpted, reproduced, translated

or utilized in any form or by any means, electronic or mechanical, in-

cluding photocopying and microlm, without the prior written permis-

sion of ZTE Corporation.

The manual is published by ZTE Corporation. We reserve the right

to make modications on print errors or update specications without

prior notice.

Version No. : R1.0

Edition Time : 2013.3

Manual No. : 079584505467

NOTE:

Do not use the device in an enclosed environment or where heat dis-

sipation is poor. Prolonged work in such space may cause excessive

heat and raise ambient temperature, which may lead to automatic

shutdown of the device for your safety. In the case of such event, cool

the device in a well-ventilated place before turning on for normal use.

3

Getting to Know Your Device

Appearance

The following figure is only for your reference. The actual product

may be different.

1. External Antenna Connector

2. WPS Button

3. OLED Screen

4. RESET Button Power Switch

5. microSD Card Slot

6. Micro USB Port

4

NOTES:

• microSD logo is a trademark of SD Card Association.

• Please use the original external antenna if necessary.

Indicators

When the device is powered on, the following icons will appear on

the OLED screen, with the corresponding indicates listed in the table

below:

Icon Indication

Network signal strength.

2G / 3G / 4G

Network type. 2G, 3G or 4G icon will appear on

the OLED screen according to the network being

connected.

Connect to the Internet automatically.

Connect to the Internet manually.

Wi-Fi Status and number of the connected users.

Battery power indication.

Connected/

Disconnected The device connects / disconnects to the Internet.

5

Installing Your Device

1. Remove the back cover.

2. Insert the SIM card.

IMPORTANT:

Your device does not support Micro/Nano or any ohter nonstandard

SIM cards. To avoid device damage, please do not use them.

3. Insert the battery.

6

4. Close the back cover.

5. Insert the microSD card.

1) Open the microSD card cover.

NOTE:

Do not pull the cover rudely, as it is connected with the device.

2) Insert the microSD card into the microSD slot. The following

picture shows the correct inserting direction. You will hear a click

when the microSD card locks in place.

3) Close the microSD card cover.

7

Connecting to Your Device

Via Wi-Fi

1. Power on your device directly. It will take 1~2 minutes to initial-

ize.

2. Use your normal Wi-Fi application on the client to search for the

available wireless networks.

NOTE:

Please set the client to obtain an IP address automatically referring to

the chapter “Conguring your PC”, and then the client will get an IP

address like “192.168.1.101”.

3. Select the SSID of your device, and then click Connect.

8

NOTE:

Please check the label on your device to get the default SSID and Wi-

Fi keys.

4. Input the password, and then click Connect.

NOTE:

You may need to input the password for Wi-Fi connection. Please

check the label on your device to get the default.

5. Wait a moment, and then the client will connect to your device

successfully.

9

Via USB Cable

1. Connect to the device.

2. Power on your device.

3. Follow the system prompts to complete the software installation.

4. Wait a moment, and then the client will connect to your device

successfully.

10

Accessing the Internet

After successfully establishing the connection, the device will always

connect to the Internet.

Notes:

If you want to modify the detailed parameters of your device, please

login the webGUI conguration page by visiting http://192.168.1.1 or

http://m.home.

Your device supports multi-clients for surng on the Internet at the

same time. The following gure is only for your reference.

Conguring Your PC

Follow the following steps and gures for Windows XP to congure

the Internet Protocol for your Wi-Fi connection. .