Zte MF25A Manual de usuario

Otros manuales para MF25A

2

Tabla de contenidos

Otros manuales de Enrutador inalámbrico de Zte

Manuales populares de Enrutador inalámbrico de otras marcas

Milesight

Milesight UG67 Manual de usuario

Airlogic

Airlogic AirSync Class 1 Manual del propietario

Samsung

Samsung WCH730B Manual de usuario

TELEFONICA

TELEFONICA USB Adapter Manual de usuario

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Manual de usuario

Askey

Askey RAC2V1K Manual de usuario

Alloy

Alloy WLF2454AP-S Manual de usuario

TP-Link

TP-Link TL-WR542G Manual de usuario

NETGEAR

NETGEAR WNR2000v4 Manual de usuario

Hama

Hama 53120 Manual de usuario

Intellinet

Intellinet 524582 Manual de usuario

Asus

Asus RT-N10P Manual de usuario

D-Link

D-Link DIR-506L Manual de usuario

Sapido

Sapido GR297n Manual de usuario

Asus

Asus DSL-N55U Manual de usuario

AMTC

AMTC WR7502 Manual de usuario

Compaq

Compaq CP-2W - iPAQ Connection Point Manual de usuario

SMC Networks

SMC Networks WBR14-N2 FICHE Manual de usuario

1

MF25A

Wireless Router

Quick Start Guide

2

LEGAL INFORMATION

Copyright © 2015 ZTE CORPORATION.

All rights reserved.

No part of this publication may be excerpted, reproduced, translated

or utilized in any form or by any means, electronic or mechanical,

including photocopying and microfilm, without the prior written

permission of ZTE Corporation.

The manual is published by ZTE Corporation. We reserve the

right to make modications on print errors or update specications

without prior notice.

Version No.: R 2.0

Release date: March 3, 2015

3

Getting to Know Your MF25A

External View

LED Indicators

Indicator State Description

POWER

ON External power supply working normally.

OFF External power supply is disconnected or

power off.

WIFI

ON Wi-Fi works normally with no data

transmission.

Blinking Wi-Fi works normally with data

transmission.

OFF Wi-Fi works abnormally, or the Wi-Fi

function is disabled.

4

Indicator State Description

PPP

ON WAN connection established (PDP

activated)

Blinking WAN connection establishing (PDP

activating)

OFF WAN connection not established (PDP not

activated).

2G/3G

ON

RF signal is normal (RSSI >= -90dBm).

Different color indicates different network.

Red: GSM/GPRS/EDGE.

Green: HSDPA/HSUPA/UMTS.

Blinking

RF signal is poor (-100dBm <= RSSI <

-90dBm).

Different color indicates different network.

Red: GSM/GPRS/EDGE.

Green: HSDPA/HSUPA/UMTS.

OFF

RF signal is not available (RSSI <

-100dBm) or there is no (U)SIM card

inserted.

LAN

ON The corresponding LAN port is connected.

Blinking The corresponding LAN port is connected

with data transmission.

Off No network cable connected.

Getting to Know Your MF25A

5

Interface Description

1. Lan Ethernet connections to computer.

2. Reset To restore factory default congurations.

3. Power Socket Connector to the external power supply.

4. On/Off Turn the router on or off.

5. WPS button WPS button is used to start Wi-Fi Protected

Setup authentication process

Getting to Know Your MF25A

6

Getting Started with Your Device

Connecting Your Device

The MF25A enables terminal devices, for example, computers, cell

phones, and tablets, to access the Internet through a network cable

or a wireless network.

The MF25A can access the Internet through different operation

modes. If you select a different operation mode, the cable

connection is different. Please refer to the chapter “Accessing the

Internet”. If you want to use the mobile network to connect to the

Internet, you need to insert your (U)SIM card rst.

Warning:

• Before installing the (U)SIM card, power off the MF25A and

remove the external power adapter.

• Your device does not support Micro/Nano SIM card or any other

nonstandard (U)SIM cards. To avoid device damage, please do

not use them or any card holders.

7

Starting the MF25A

Warning:

The MF25A must be placed in a well ventilated environment. Do not

cover the device.

Slide the on/off switch to start the MF25A. After the device is

initialized, the LED indicators are in normal status.

Conguring Your PC

The following takes the Windows 7 as an example to describes how

to congure the Internet protocol so that your PC can obtain an IP

address automatically.

1. Right-click Network and then select Properties.

Getting Started with Your Device

8

2. Click Change adapter settings.

3. Right-click the Wireless Network Connection icon and then

select Properties.

Note:

If the PC connects to MF25A through a network cable, right-click

Local Area Connection and select Properties.

Getting Started with Your Device

9

4. Select Internet Protocol Version 4 (TCP/IPv4), and then click

Properties.

Getting Started with Your Device

10

5. Select the two items indicated in the following gures, and then

click OK to nish the conguration.

Wireless Connection (Optional)

1. Make sure that the WLAN operates properly. Check the Wi-Fi

Setting on the WebGUI Conguration page or check the Wi-Fi

indicator.

Getting Started with Your Device