Zoom X5 Manual de usuario

ADSL X5

U S E R’S G U I D E

NOTICE

NOTICENOTICE

NOTICE

This document contains proprietary information protected by

software, and documentation are copyrighted. No part of this

document may be photocopied or reproduced by mechanical,

electronic, or other means in any form.

The manufacturer does not warrant that the hardware will work

properly in all environments and applications, and makes no

warranty or representation, either expressed or implied, with respect

to the quality, performance, merchantability, or fitness for a

particular purpose of the software or documentation. The

manufacturer reserves the right to make changes to the hardware,

software, and documentation without obligation to notify any person

or organization of the revision or change.

All brand and product names are the trademarks of their respective

owners.

Contents

OVERVIEW................................................................................4

CHAPTER 1: INSTALLATION INSTRUCTIONS............................5

INSTALLING THE X5........................................................................... 8

REMOVING THE X5 SOFTWARE.....................................................27

UNIVERSAL PLUG AND PLAY.......................................................... 28

IF YOU NEED HELP..........................................................................28

CHAPTER 2: STATUS MONITORING .......................................29

WHY MONITOR STATUS?.................................................................29

MONITORING SYSTEM STATUS.......................................................30

MONITORING ADSL STATUS .........................................................31

CHAPTER 3: ADVANCED SETUP OPTIONS..............................32

HOW TO USE THE ADVANCED OPTIONS ....................................33

CHANGING YOUR WAN SETTINGS ..............................................38

CHANGING YOUR FIREWALL SETTINGS ......................................39

CHANGING USER NAMES AND PASSWORDS................................ 40

BACKING UP YOUR CONFIGURATION ......................................... 41

RESETTING DEFAULT SETTINGS...................................................43

USING IP FILTERS............................................................................. 44

APPENDIX A: ADSL INTERNET SETTINGS TABLES ..............45

APPENDIX B: FRONT AND BACK PANELS ..............................48

APPENDIX C: TCP/IP NETWORK SETTINGS.........................50

APPENDIXD: TROUBLESHOOTING

.......................................57

APPENDIX E: CONFIGURING YOUR BROWSER ......................62

APPENDIX F: REGULATORY INFORMATION ..........................66

Overview 4

Overview

The X5 integrates an ADSL modem, a router, and a four-port

switch in one device. It includes an advanced firewall, which allows

you to control Internet access from your local network, and which

protects your local network from unwanted Internet traffic.

With four LAN ports (labeled 1, 2, 3, 4), the X5 supports the direct

connection of up to four computers with Ethernet ports. Those

with a network device (such as a wireless access point) can plug it

into one of the LAN ports to support up to 253 Internet

connections. (There is also a USB port for Windows computers

that do not have an Ethernet port, or for Windows users that want

to connect five computers directly to the modem.)

The X5 modem is also enabled for Universal Plug and Play

(UPnP™). This means that if you plug other devices with UPnP

capabilities into your computer or network (for example, a gaming

application, router, or stand-alone firewall) they should

automatically detect the X5 and make the needed configurations

for them to work together.

This User’s Guide contains installation instructions for Macintosh,

Linux, and Windows computers, and information about the X5’s

advanced setup options. While most users will not need to use the

advanced setup options, there are cases in which these advanced

settings are necessary (for example, if you have a static IP address).

Chapter 1: Installation Instructions 5

Installation Instructions

This chapter covers the basic instructions needed to install your

X5 and connect to the Internet. These instructions can be used

by those with a Macintosh, Linux, or Windows operating

system. If you already installed and connnected your X5 (using

the separate Quick Start booklet provided for Windows users),

you can skip this chapter and begin with Chapter 2.

Package Contents

Your package contains the items shown below:

The CD contains the installation software, documentation,

warranty, and Customer Support information.

Zoom X5

ADSL Modem

Phone Cord

Ethernet Cable

USB Cable

Power Cube

Software

CD-ROM

6ADSLX5User'sGuide

If anything is missing or damaged, please contact Zoom Customer

Support or whoever sold you the modem.

In addition, the package may include:

•Phone-jack adapter to adapt the phone cord to a particular

phone jack (certain countries only)

•ADSL line filter(s) (certain models only)

Before You Begin

Before you begin installing the X5 modem using this guide, you

must have the following available to you:

•ADSL service enabled on your telephone line. To do this,

you need to sign up with an ADSL service provider. Once this

service is enabled, you should have an ADSL-enabled

telephone wall jack to plug the X5 modem into. (Your service

provider may refer to “ADSL service” as “DSL service.”)

•One or more computers that you want to connect to the

Internet. The X5 supports the connection of up to four

Macintosh, Linux, or Windows computers with Ethernet ports.

Note for Windows users:

Your computers must use one of the following operating

systems: Windows 98/Me/2000/XP. We recommend that you

connect all of your Windows computers using Ethernet ports.

If any of your computers do not have an Ethernet port, you

can purchase a Network Interface Card (NIC) to add one.

Alternately, you can connect one of your computers using its

USB port. (This also enables Windows users to connect five

computers, instead of four, directly to the X5.)

Chapter 1: Installation Instructions 7

•[Optional] Network device: You can connect a network

device (such as a wireless access point, router, hub, or switch)

to the X5 modem. If you plan to connect a network device, be

aware that you must first connect at least one of your

computers directly to the X5. This will be the computer from

which you will configure the modem. (For Windows users, this

will also be the computer on which you will install the

software.)

Note:

Because network devices can be set up in many ways, this

user’s guide provides general instructions about connecting a

network device to the X5. For information about setting up

your network device, see that device’s documentation.

•Additional Ethernet cables. These are only required if you

plan to connect more than one computer/network device with

an Ethernet port to the X5. (The X5 comes with one Ethernet

cable and one USB cable.)

8ADSLX5User'sGuide

Installing the X5

Installing the X5 involves four steps: Installing the Software,

Installing the Hardware, Establishing Communication, and

Connecting Additional Computers to the Internet.

Step 1: Installing the Software

Important!

This section is for Windows computers only. If you are using a

Macintosh or Linux computer (or you are a Macintosh or Linux

user who is connecting the X5 directly to a network device), skip

this section and begin with the next one, Installing the Hardware

on page 10.

Regardless of how many Windows computers you plan to connect

to the X5, you only have to install the software on one of them.

The Windows computer on which you install the software will also

be the first computer that you physically connect to the X5. It will

also be the computer from which you configure the modem. (The

hardware connection and the modem configuration process are

explained later in this user’s guide.)

Determining which computer to install the software on depends on

how the computers will be connected to the X5:

•If all of your Windows computers will be connected using

their Ethernet ports: You can install the software on any one

of these computers.

•If one of the Windows computers will be connected using

its USB port and the rest using their Ethernet ports: You

must install the software on the computer with the USB port.

Because the back panel of the X5 modem has one USB port

and four LAN (Ethernet) ports, only one computer can be

connected using a USB port. Note, however, that we

recommend you connect your computers using Ethernet ports,

if possible.

Chapter 1: Installation Instructions 9

•If you will be connecting a network device (such as a

wireless access point, router, hub, or switch): You must

install the software on a Windows computer that will be

directly connected to the X5. This means that if you have a

network device, you should choose a computer to connect to

the modem (the actual physical connection will be made later

in this user’s guide) and install the software on it. For most

users, this will probably be the computer that is closest to the

ADSL-enabled phone jack. If you were already planning to

connect multiple computers directly to the X5 (in addition to a

network device), review the previous two bullets to determine

which computer to install the software on.

Windows computer users MUST install the software

BEFORE installing the hardware.

Important!

If you need to use the X5’s USB option, you must remove any

existing USB modem drivers on your Windows computer before

installing this software. On the desktop, click the Start button, and

then—depending on your operating system—either click Control

Panel, or click Settings and then Control Panel. In the Control

Panel, double-click Add/Remove Programs. On the

Add/Remove Program Properties dialog box, select the USB

modem you are removing on the Install/Uninstall tab, click

Remove, and then click OK.

1Turn on your computer (if it is not on already).

2Insert the supplied CD into the CD-ROM drive of your

computer. The CD should start automatically and the

Language Selection screen should appear. (If the CD does

not start automatically, on the desktop, click the Start button,

click Run, and then type D:\setup.exe, where Dis the letter

of your CD-ROM drive.)

3Select your language. The Main Menu screen opens.

10 ADSL X5 User's Guide

4Click Installation Wizard.

5Click ADSL X5 Modem to start the software installation, then

click Next when prompted.

6When the installation is complete, click Finish, then click

Exit.

7Close any applications that may be open, then remove the CD

from the CD-ROM drive.

8Shut down the computer.

Congratulations! You have installed the software. Now, continue

with the next section, Installing the Hardware.

Step 2: Installing the Hardware

Windows users only: Be sure that you have already installed

the software BEFORE beginning this section. Software

installation is not required for Macintosh and Linux

computers.

1Shut down your computer (if it is not shut down already).

!For Windows users, this is the computer on which you just

installed the software.

!For Macintosh or Linux users, this can be any one of the

computers that you plan to plug directly into the X5. If

you plan to use a network device (such as a wireless access

point, router, hub, or switch) you must connect at least

one of your computers directly to the modem.

Otros manuales para X5

Tabla de contenidos

Otros manuales de Módem de Zoom

Manuales populares de Módem de otras marcas

Davicom

Davicom DM562AP Manual de usuario

EpiValley

EpiValley TATA indicom SXC-1080 Manual de usuario

Zte

Zte WiMAX Manual de usuario

Intelimax

Intelimax MA-2060 Manual de usuario

SMC Networks

SMC Networks D3CM1604V Manual de uso y cuidado

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manual de usuario

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manual de usuario

Samsung

Samsung AceLink SAM-335A Manual de usuario

Enfora

Enfora Enabler-G Guía de configuración rápida

iRZ

iRZ ATM2-232 Manual de usuario

Zhone

Zhone 6310 Manual de usuario

Paradyne

Paradyne Hotwire 7976 Manual de usuario

US Robotics

US Robotics 3453C Manual de usuario

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manual de usuario

Zte

Zte MF823 Manual de usuario

Four-Faith

Four-Faith F1403 Manual de usuario

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manual de usuario

Gemtek

Gemtek WiMAX WIXFBR-103 Manual de usuario