ZKTeco C3 Manual de usuario

ZK Access Quick Start Guide





Install C3 using TCP/IPmode of communication

C3 controller supports the connection from panel to server over RS485 data line and also via

nodes on TCP/IP Ethernet networks. This greatly increases the flexibility of installation options.

Note: Make sure the devices are in the same LAN network with server or directly connect to the

server using the TCP/IP communication.

TCP/IP Connection Cable Mode

There are two ways to connect to C3 controller.

○

1Network cable directly connects Management host and the device, without a hub.

○

2In a large office a hub/switch is needed to connect more than 2 devices.

The configuration is as follows:



TCP/IP Communication

How to add a device into ZKAccess software?

ZKAccess provides two ways to add a device.

○

1When the IP address of the device is already known, you can quickly add it by entering

the IP address as follow:

Click [Add] on the [Device-Device] interface.

ZK Access Quick Start Guide





As the interface appears, write the [Device Name], then give the [IP address] of the device. The

[IP Port No.] is defaulted to 4370 by the system. Please set the password if needed.

Note: Select the type of the device. If it is a Four-Door-One-Way Access Control Panel there will

appear an extra option-[Switch to Two-door Two-way]. Select as appropriate according to

the actual device.

Select the [Area] the device belongs to. If you do not want to clear the data (Information in Time

zones, Access Levels, etc.) in the device when adding, remove the check beside the [Clear Data in

the Device when adding] option. Click [OK] to add the device.

○

2Click [SearchAccess Control Panels] option on the [Device-Device] interface.

Click [Search], after searching, the usable device will show in the results list. Modify the IP

address to available IP, and then add the device.





ZK Access Quick Start Guide





Using fast search tool to modify the IPaddress of a device

ZK provides a fast search tool for searching devices and modifying the IP addresses. This allows

devices to be added directly without modifying the system, which is inconvenient and time

consuming.

The tool and the operation of searching and modifying are as follows:

Click [Search Panel] on the [Setting] dropdown menu.

After a few seconds results for the usable devices will appear.

Click to select the device and [Modify IPAddress] on the [Setting] dropdown menu to modify the

IP address of the devices.

Tabla de contenidos

Otros manuales de Controladores de acceso IP de ZKTeco

ZKTeco

ZKTeco BioPro SA20 Manual de usuario

ZKTeco

ZKTeco F6 Manual de usuario

ZKTeco

ZKTeco C5S120 Guía

ZKTeco

ZKTeco IN710 Manual de usuario

ZKTeco

ZKTeco Green Label ProFace X Manual de usuario

ZKTeco

ZKTeco Green Label ProFace X Manual de usuario

ZKTeco

ZKTeco LFace10 Manual de usuario

ZKTeco

ZKTeco MultiBio 700 Manual de usuario

ZKTeco

ZKTeco ProMA Series Manual de usuario

ZKTeco

ZKTeco SpeedFace-VSL Series Manual de usuario

ZKTeco

ZKTeco C2-260 Manual de usuario

ZKTeco

ZKTeco Aurora T1 Manual de usuario

ZKTeco

ZKTeco White LCD Series Manual de usuario

ZKTeco

ZKTeco Green Label ProlD104 Manual de usuario

ZKTeco

ZKTeco F19 Manual de usuario

ZKTeco

ZKTeco FaceKiosk-H13A Manual de usuario

ZKTeco

ZKTeco C3 Pro Manual de usuario

ZKTeco

ZKTeco C5S120 Manual de usuario

ZKTeco

ZKTeco SpeedFace-V3L Manual de usuario

ZKTeco

ZKTeco ProlD Series Manual de usuario

ZKTeco

ZKTeco F18 Manual de usuario

ZKTeco

ZKTeco MiniAC Plus Manual de usuario

ZKTeco

ZKTeco F17 Manual de usuario

ZKTeco

ZKTeco MB10-VL Manual de usuario

Manuales populares de Controladores de acceso IP de otras marcas

Jantar

Jantar REX A-1-9 Manual de usuario

2N

2N Access Unit Hoja de instrucciones

Kedacom

Kedacom KSCA120 Series Manual de usuario

H3C

H3C WX2880X Manual de usuario

G4S

G4S S870-EX Guía

PRASTEL

PRASTEL M2000PE Manual de usuario

Allegion

Allegion interflex IF-281 Cylinder Manual de usuario

TECOM

TECOM TS1067E Manual de usuario

Fermax

Fermax Memokey 100C Guía del usuario

Fermax

Fermax CITYLINE MEMOKEY Manual de instrucciones

Software House

Software House iSTAR Pro 2U RM Manual de instrucciones

AKCP

AKCP SP+ Manual de usuario

Bpt

Bpt HNA/102 Manual de usuario

Civintec

Civintec CV9601T-T-1F Manual de usuario

BioMax

BioMax N-X90W Manual de usuario

FingerTec

FingerTec s-Kadex Manual de usuario

H3C

H3C WX5002ACCESSCONTROLLER Manual de usuario

C Prox Ltd

C Prox Ltd DPN-2 Manual de usuario