YASKAWA SGD7S series Manual de usuario

Model: SGD7S-A20AF21

-7S SERVOPACK with

FT/EX Specification

for Cutting Application

Feed Shaft Motor

-7-Series AC Servo Drive

Product Manual

MANUAL NO. SIEP S800002 10B

Selecting a SERVOPACK

Clearance Control

Tuning

Monitoring

Maintenance

Parameter Lists

Appendices

Basic Information on

SERVOPACKs

Servo Gain Adjustments for

High-speed and High-precision Control

Adjusting the Feed Shaft Servo Gain

for Cutting Applications

Wiring and Connecting

SERVOPACKs

retrieval system, or transmitted, in any form, or by any means, mechanical, elec-

tronic, photocopying, recording, or otherwise, without the prior written permission

of Yaskawa. No patent liability is assumed with respect to the use of the informa-

tion contained herein. Moreover, because Yaskawa is constantly striving to

improve its high-quality products, the information contained in this manual is sub-

ject to change without notice. Every precaution has been taken in the preparation

of this manual. Nevertheless, Yaskawa assumes no responsibility for errors or

omissions. Neither is any liability assumed for damages resulting from the use of

the information contained in this publication.

iii

About this Manual

This manual describes the feed shaft motor drive of the Σ-7-Series AC Servo Drive Σ-7S SERVO-

PACKs for cutting applications.

Read and understand this manual to ensure correct usage of the Σ-7-Series AC Servo Drives.

Keep this manual in a safe place so that it can be referred to whenever necessary.

Outline of Manual

The contents of the chapters of this manual are described in the following table.

When you use the SERVOPACK, read this manual and the product manual given in the following

table.

Item This

Manual

Σ-7S SERVOPACK with

MECHATROLINK-III

Communications References

Product Manual

(Manual No.: SIEP S800001 28)

Basic Informa-

tion on

SERVOPACKs

The Σ-7 Series – 1.1

Product Introduction 1.1 –

Interpreting the Nameplates – 1.2

Part Names – 1.3

Model Designations 1.2 –

Combinations of SERVOPACKs and Servomotors 1.3 –

Functions 1.4 –

Restrictions 1.5 –

SigmaWin+ 1.6 –

Combining the SERVOPACKs with MP-Series Machine

Controllers and the MPE720 Engineering Tool 1.7 –

Selecting a

SERVOPACK

Ratings 2.1 –

Overload Protection Characteristics 2.2 –

Specifications 2.3 –

Block Diagrams – 2.2

External Dimensions – 2.3

Examples of Standard Connections between SERVO-

PACKs and Peripheral Devices –2.4

SERVOPACK Installation – Chapter 3

Wiring and

Connecting

SERVOPACKs

Wiring Precautions – 4.1

Basic Wiring Diagrams 3.1 –

Wiring the Power Supply to the SERVOPACK – 4.3

Wiring Servomotors – 4.4

I/O Signal Connections 3.2 –

Connecting the Gap Sensor 3.3 –

Connecting Safety Function Signals – 4.6

Connecting MECHATROLINK Communications Cables – 4.7

Connecting the Other Connectors – 4.8

Basic Functions That Require Setting before Operation – Chapter 5

Clearance Control Chapter 4 –

Continued on next page.

Application Functions – Chapter 6

Trial Operation and Actual Operation – Chapter 7

Tuning Chapter 5 –

Adjusting the Feed Shaft Servo Gain for Cutting Applications Chapter 6 –

Servo Gain Adjustment for High-speed and High-precision Control Chapter 7 –

Monitoring Chapter 8 –

Fully-Closed Loop Control – Chapter 10

Safety Functions – Chapter 11

Maintenance

Inspections and Part Replacement – 12.1

Alarm Displays 9.1 –

List of Alarms 9.1.1 –

Troubleshooting Alarms 9.1.2 –

Resetting Alarms – 12.2.3

Displaying Alarm History – 12.2.4

Clearing the Alarm History – 12.2.5

Resetting Alarms Detected in Option Modules – 12.2.6

Resetting Motor Type Alarms – 12.2.7

Warning Displays 9.2 –

Monitoring Communications Data during Alarms or

Warnings –12.4

Troubleshooting Based on the Operation and Condi-

tions of the Actuator 9.4 –

Parameter Lists Chapter 10 –

Appendices

Interpreting Panel Displays – 14.1

Corresponding SERVOPACK and SigmaWin+ Function

Names 11.1 –

Continued from previous page.

Item This

Manual

Σ-7S SERVOPACK with

MECHATROLINK-III

Communications References

Product Manual

(Manual No.: SIEP S800001 28)

Related Documents

The relationships between the documents that are related to the Servo Drives are shown in the following

figure. The numbers in the figure correspond to the numbers in the table on the following pages. Refer

to these documents as required.

Machine Controllers

Refer to the manual for your Machine Controller

for the documentsrelated to the Machine Controllers.



MP3000-

Series

Manuals

System Components



Machine

Controller

and

Servo Drive

General

Catalog



MP3300

Catalog



Σ-7-Series

Catalog

Machine ControllersServo Drives

ManualsCatalogs

SERVOPACKsand Option Modules

Servo Drives

Servomotors



Σ-7-Series

Rotary

Servomotor

Product

Manual

Σ-7-Series

Linear

Servomotor

Product

Manual



Enclosed

Documents

Σ-7-Series

Direct Drive

Servomotor

Product

Manual

Σ-7-Series

Peripheral

Device

Selection

Manual

Option

Module

User’s

Manual

Σ-7-Series

Operation

Interface

Operating

Manuals



Enclosed

Documents

Σ-7-Series

Σ-7S/Σ-7W

Hardware Option

Product

Manuals



Σ-7-Series

Σ-7S/Σ-7W

SERVOPACK

Product

Manuals



Σ-7-Series

MECHATROLINK

Communications

Command

Manuals

Σ-7-Series

Σ-7S/Σ-7W

SERVOPACK

FT/EX

Product Manuals

(such asthismanual)



Classification Document Name Document No. Description



Machine Controller

and Servo Drive

General Catalog

Machine Controller and

AC Servo Drive

Solutions Catalog

KAEP S800001 22

Describes the features and applica-

tion examples for combinations of

MP3000-Series Machine Control-

lers and Σ-7-Series AC Servo

Drives.



MP3300 Catalog

Machine Controller

MP3300 KAEP C880725 03

Provides detailed information on

MP3300 Machine Controllers,

including features and specifica-

tions.



Σ-7-Series Catalog

AC Servo Drives

Σ-7 Series KAEP S800001 23

Provides detailed information on Σ-

7-Series AC Servo Drives, including

features and specifications.



MP3000-Series

Manuals

Machine Controller

MP3000 Series

MP3300

Product Manual

SIEP C880725 21

Describes the functions, specifica-

tions, operating methods, mainte-

nance, inspections, and

troubleshooting of the MP3000-

series MP3300 Machine Control-

lers.



Enclosed Documents

Σ-7-Series AC Servo Drive

Σ-7S and Σ-7W SERVOPACK

Safety Precautions

TOMP C710828 00

Provides detailed information for

the safe usage of Σ-7-Series

SERVOPACKs.

Σ-V-Series/Σ-V-Series

for Large-Capacity Models/

Σ-7-Series

Safety Precautions

Option Module

TOBP C720829 00 Provides detailed information for

the safe usage of Option Modules.

Σ-V-Series/Σ-V-Series

for Large-Capacity Models/

Σ-7-Series

Installation Guide

Command Option Module

TOBP C720829 01

Provides detailed procedures for

installing a Command Option Mod-

ule in a SERVOPACK.

Σ-V-Series/Σ-V-Series

for Large-Capacity Models/

Σ-7-Series

Installation Guide

Fully-closed Module

TOBP C720829 03

Provides detailed procedures for

installing the Fully-closed Module in

a SERVOPACK.

Σ-V-Series/Σ-V-Series

for Large-Capacity Models/

Σ-7-Series

Installation Guide

Safety Module

TOBP C720829 06

Provides detailed procedures for

installing the Safety Module in a

SERVOPACK.

Σ-V-Series/Σ-V-Series

for Large-Capacity Models/

Σ-7-Series

Installation Guide

Indexer Module

TOBP C720829 02

Provides detailed procedures for

installing the Indexer Module in a

SERVOPACK.

Σ-V-Series/Σ-V-Series

for Large-Capacity Models/

Σ-7-Series

Installation Guide

DeviceNet Module

TOBP C720829 07

Provides detailed procedures for

installing the DeviceNet Module in a

SERVOPACK.

Continued on next page.

vii



Σ-7-Series

Σ-7S/Σ-7W

SERVOPACK

Product Manuals

Σ-7-Series AC Servo Drive

Σ-7S SERVOPACK with

MECHATROLINK-III

Communications References

Product Manual

SIEP S800001 28

Provide detailed information on

selecting Σ-7-Series SERVO-

PACKs and information on install-

ing, connecting, setting, performing

trial operation for, tuning, and mon-

itoring the Servo Drives.

Σ-7-Series AC Servo Drive

Σ-7S SERVOPACK with

MECHATROLINK-II

Communications References

Product Manual

SIEP S800001 27

Σ-7-Series AC Servo Drive

Σ-7S SERVOPACK with

Analog Voltage/Pulse Train

References

Product Manual

SIEP S800001 26

Σ-7-Series AC Servo Drive

Σ-7S SERVOPACK

Command Option Attachable

Type with INDEXER Module

Product Manual

SIEP S800001 64

Σ-7-Series AC Servo Drive

Σ-7S SERVOPACK

Command Option Attachable

Type with DeviceNet Module

Product Manual

SIEP S800001 70

Σ-7-Series AC Servo Drive

Σ-7W SERVOPACK with

MECHATROLINK-III

Communications References

Product Manual

SIEP S800001 29



Σ-7-Series

Σ-7S/Σ-7W

SERVOPACK with

Hardware Option

Specifications

Product Manuals

Σ-7-Series AC Servo Drive

Σ-7S/Σ-7W SERVOPACK with

Hardware Option Specifications

Dynamic Brake

Product Manual

SIEP S800001 73

Provides detailed information on

Hardware Options for Σ-7-Series

SERVOPACKs.

Σ-7-Series AC Servo Drive

Σ-7W SERVOPACK with

Hardware Option Specifications

HWBB Function

Product Manual

SIEP S800001 72

Continued on next page.

Continued from previous page.

Classification Document Name Document No. Description

viii



Σ-7-Series

Σ-7S/Σ-7W

SERVOPACK with

FT/EX

Specification

Product Manuals

Σ-7-Series AC Servo Drive

Σ-7S SERVOPACK with

FT/EX Specification for Indexing

Application Product Manual

SIEP S800001 84

Provides detailed information on

the FT/EX Option for Σ-7-Series

SERVOPACKs.

Σ-7-Series AC Servo Drive

Σ-7S SERVOPACK with

FT/EX Specification for Tracking

Application Product Manual

SIEP S800001 89

Σ-7-Series AC Servo Drive

Σ-7S SERVOPACK with

FT/EX Specification for SGM7D

Motor Product Manual

SIEP S800001 91

Σ-7-Series AC Servo Drive

Σ-7S SERVOPACK with FT/EX

Specification for Press and

Injection Molding Application

Product Manual

SIEP S800001 94

Σ-7-Series AC Servo Drive

Σ-7S SERVOPACK with

FT/EX Specification for Cutting

Application Feed Shaft Motor

Product Manual

This manual

(SIEP S800002 10)



Enclosed Documents

AC Servo Drive

Rotary Servomotor

Safety Precautions

TOBP C230260 00

Provides detailed information for

the safe usage of Rotary Servomo-

tors and Direct Drive Servomotors.

AC Servomotor

Linear ΣSeries

Safety Precautions

TOBP C230800 00

Provides detailed information for

the safe usage of Linear Servomo-

tors.



Σ-7-Series

Rotary Servomotor

Product Manual

Σ-7-Series AC Servo Drive

Rotary Servomotor

Product Manual

SIEP S800001 36

Provide detailed information on

selecting, installing, and connecting

the Σ-7-Series Servomotors.

Σ-7-Series

Linear Servomotor

Product Manual

Σ-7-Series AC Servo Drive

Linear Servomotor

Product Manual

SIEP S800001 37

Σ-7-Series

Direct Drive

Servomotor

Product Manual

Σ-7-Series AC Servo Drive

Direct Drive Servomotor

Product Manual

SIEP S800001 38

Σ-7-Series

Peripheral Device

Selection Manual

Σ-7-Series AC Servo Drive

Peripheral Device

Selection Manual

SIEP S800001 32 Describes the peripheral devices

for a Σ-7-Series Servo System.

Continued on next page.

Continued from previous page.

Classification Document Name Document No. Description

Σ-7-Series

MECHATROLINK

Communications

Command Manuals

Σ-7-Series AC Servo Drive

MECHATROLINK-II

Communications

Command Manual

SIEP S800001 30

Provides detailed information on

the MECHATROLINK-II communi-

cations commands that are used

for a Σ-7-Series Servo System.

Σ-7-Series AC Servo Drive

MECHATROLINK-III

Communications

Standard Servo Profile

Command Manual

SIEP S800001 31

Provides detailed information on

the MECHATROLINK-III communi-

cations standard servo profile com-

mands that are used for a Σ-7-

Series Servo System.

Σ-7-Series

Operation Interface

Operating Manuals

Σ-7-Series AC Servo Drive

Digital Operator

Operating Manual

SIEP S800001 33

Describes the operating proce-

dures for a Digital Operator for a

Σ-7-Series Servo System.

AC Servo Drive

Engineering Tool

SigmaWin+

Operation Manual

SIET S800001 34

Provides detailed operating proce-

dures for the SigmaWin+ Engineer-

ing Tool for a Σ-7-Series Servo

System.

Option Module

User’s Manual

Σ-V-Series/Σ-V-Series

for Large-Capacity Models/

Σ-7-Series

User’s Manual

Safety Module

SIEP C720829 06

Provides details information

required for the design and mainte-

nance of a Safety Module.

Continued from previous page.

Classification Document Name Document No. Description

Using This Manual

Technical Terms Used in This Manual

The following terms are used in this manual.

Differences in Terms for Rotary Servomotors and Linear Servomotors

There are differences in the terms that are used for Rotary Servomotors and Linear Servomotors.

This manual primarily describes Rotary Servomotors. If you are using a Linear Servomotor, you

need to interpret the terms as given in the following table.

Term Meaning

Servomotor A Σ-7-Series Rotary Servomotor, Direct Drive Servomotor, or Linear Servomotor.

Rotary Servomotor

A generic term used for a Σ-7-Series Rotary Servomotor (SGM7J, SGM7A, SGM7P, or

SGM7G) or a Direct Drive Servomotor (SGMCS or SGMCV).

The descriptions will specify when Direct Drive Servomotors are excluded.

Linear Servomotor A Σ-7-Series Linear Servomotor (SGLG, SGLF, SGLT, or SGLC).

SERVOPACK A Σ-7-Series Σ-7S Servo Amplifier with MECHATROLINK-III Communications References.

Servo Drive The combination of a Servomotor and SERVOPACK.

Servo System A servo control system that includes the combination of a Servo Drive with a host controller

and peripheral devices.

servo ON Supplying power to the motor.

servo OFF Not supplying power to the motor.

base block (BB) Shutting OFF the power supply to the motor by shutting OFF the base current to the power

transistor in the SERVOPACK.

servo lock A state in which the motor is stopped and is in a position loop with a position reference of 0.

Main Circuit Cable One of the cables that connect to the main circuit terminals, including the Main Circuit Power

Supply Cable, Control Power Supply Cable, and Servomotor Main Circuit Cable.

SigmaWin+ The Engineering Tool for setting up and tuning Servo Drives or a computer in which the Engi-

neering Tool is installed.

Rotary Servomotors Linear Servomotors

torque force

moment of inertia mass

rotation movement

forward rotation and reverse rotation forward movement and reverse movement

CW and CCW pulse trains forward and reverse pulse trains

rotary encoder linear encoder

absolute rotary encoder absolute linear encoder

incremental rotary encoder incremental linear encoder

unit: min-1 unit: mm/s

unit: N·m unit: N

Otros manuales para SGD7S series

Tabla de contenidos

Otros manuales de Unidad de control de YASKAWA

YASKAWA

YASKAWA S-II Series Manual de usuario

YASKAWA

YASKAWA S-V Series Manual de usuario

YASKAWA

YASKAWA CANopen SI-S3 Manual de usuario

YASKAWA

YASKAWA Motoman MLX200 Manual de usuario

YASKAWA

YASKAWA VIPA HMI cloudPanel H41-L1A41-0 Manual de usuario

YASKAWA

YASKAWA MP2000 Series Manual de usuario

YASKAWA

YASKAWA VIPA SLIO FM 050-1BB00 Manual de usuario

YASKAWA

YASKAWA motoman NX100 Manual de usuario

YASKAWA

YASKAWA VIPA System SLIO Manual de usuario

YASKAWA

YASKAWA U1000 Series Manual de usuario

YASKAWA

YASKAWA V1000 SI-EM3D/V Manual de usuario

YASKAWA

YASKAWA CM085 Manual de usuario

YASKAWA

YASKAWA Profibus-DP SGDH Series Manual de usuario

YASKAWA

YASKAWA MECHATROLINK Sigma 2 Series Manual de usuario

YASKAWA

YASKAWA SI-EM3 Manual de usuario

YASKAWA

YASKAWA DO-A3 Manual de usuario

YASKAWA

YASKAWA VIPA IM 053IP Manual de usuario

YASKAWA

YASKAWA FM 054 Manual de usuario

YASKAWA

YASKAWA MP2000 Series Manual de usuario

YASKAWA

YASKAWA IM 053PN Manual de usuario

YASKAWA

YASKAWA SI-ES3 Manual de usuario

YASKAWA

YASKAWA FM 050 Manual de usuario

YASKAWA

YASKAWA CM006 Manual de usuario

YASKAWA

YASKAWA AI-A3 Manual de usuario

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario