YASKAWA DO-A3 Manual de usuario

MANUAL NO. TOBP C730600 41C

形式 DO-A3

取扱説明書

ディジタル出力

安川インバータ1000シリーズオプション

製品を安全にお使い頂くために，この取扱説明書を必ずお読みください。

また，本書をお手元に保管していただくとともに，最終的に本製品をご使用になる

ユーザー様のお手元に確実に届けられるよう，お取り計らい願います。

To properly use the product, read this manual thoroughly and retain

for easy reference, inspection, and maintenance. Ensure the end user

receives this manual.

Installation Manual

Digital Output

YASKAWA AC Drive 1000-Series Option

Type DO-A3

2YASKAWA ELECTRIC TOBP 730600 41C 1000-Series Option DO-A3 Installation Manual

transmitted, in any form or by any means, mechanical, electronic, photocopying, recording, or otherwise,

without the prior written permission of Yaskawa. No patent liability is assumed with respect to the use of the

information contained herein. Moreover, because Yaskawa is constantly striving to improve its high-quality

products, the information contained in this manual is subject to change without notice. Every precaution has

been taken in the preparation of this manual. Yaskawa assumes no responsibility for errors or omissions.

Neither is any liability assumed for damages resulting from the use of the information contained in this

publication.

YASKAWA E LE CT RIC TOBP 730600 41C 1000-Series Option DO-A3 Installation Manual 3

Table of Contents

1 PREFACE AND SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2 PRODUCT OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

3 RECEIVING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

4 OPTION COMPONENTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

5 INSTALLATION PROCEDURE . . . . . . . . . . . . . . . . . . . . . . . 10

6 RELATED PARAMETERS . . . . . . . . . . . . . . . . . . . . . . . . . . 22

7 TROUBLESHOOTING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

8 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

4 YASKAWA ELECTRIC TOBP 730600 41C 1000-Series Option DO-A3 Installation Manual

1 Preface and Safety

Yaskawa manufactures products used as components in a wide variety of industrial systems

and equipment. The selection and application of Yaskawa products remain the responsibility

of the equipment manufacturer or end user. Yaskawa accepts no responsibility for the way its

products are incorporated into the final system design. Under no circumstances should any

Yaskawa product be incorporated into any product or design as the exclusive or sole safety

control. Without exception, all controls should be designed to detect faults dynamically and

fail safely under all circumstances. All systems or equipment designed to incorporate a

product manufactured by Yaskawa must be supplied to the end user with appropriate

warnings and instructions as to the safe use and operation of that part. Any warnings

provided by Yaskawa must be promptly provided to the end user. Yaskawa offers an express

warranty only as to the quality of its products in conforming to standards and specifications

published in the Yaskawa manual. NO OTHER WARRANTY, EXPRESS OR IMPLIED, IS

OFFERED. Yaskawa assumes no liability for any personal injury, property damage, losses,

or claims arising from misapplication of its products.

◆Applicable Documentation

The following manuals are available for the option:

Digital Output DO-A3 Option

Yaskawa AC Drive

1000-Series Option

Digital Output DO-A3

Installation Manual

Manual No: TOBPC73060041

Read this manual first.

The installation manual is packaged with the

option and contains information required to install

the option and set up related drive parameters.

Yaskawa Drive

Yaskawa AC Drive

1000-Series

Quick Start Guide

The drive manuals cover basic installation,

wiring, operation procedures, functions,

troubleshooting, and maintenance information.

The manuals also include important information

about parameter settings and drive tuning.

Access these sites to obtain Yaskawa instruction

manuals:

U.S.: http://www.yaskawa.com

Europe: http://www.yaskawa.eu.com

Japan: http://www.e-mechatronics.com

For questions, contact your local Yaskawa sales

office or the nearest Yaskawa representative.

Yaskawa AC Drive

1000-Series

Technical Manual

1 Preface and Safety

YASKAWA ELECTRIC TOBP 730600 41C 1000-Series Option DO-A3 Installation Manual 5

◆Terms

◆Registered Trademarks

Trademarks are the property of their respective owners.

◆Supplemental Safety Information

Read and understand this manual before installing, operating, or servicing this option. Install

the option according to this manual and local codes.

The following conventions indicate safety messages in this manual. Failure to heed these

messages could cause fatal injury or damage products and related equipment and systems.

Note: Indicates supplemental information that is not related to safety messages

Drive: Yaskawa AC Drive 1000-Series

Option: Yaskawa AC Drive 1000-Series Option Digital Output DO-A3

DANGER

Indicates a hazardous situation, which, if not avoided, will result in death or serious

injury.

WARNING

Indicates a hazardous situation, which, if not avoided, could result in death or

serious injury.

CAUTION

Indicates a hazardous situation, which, if not avoided, could result in minor or

moderate injury.

NOTICE

Indicates an equipment damage message.

1 Preface and Safety

6YASKAWA ELECTRIC TOBP 730600 41C 1000-Series Option DO-A3 Installation Manual

■General Safety

General Precautions

• The diagrams in this book may include options and drives without covers or safety shields to

illustrate details. Be sure to reinstall covers or shields before operating any devices. Use the option

according to the instructions described in this manual.

• Any illustrations, photographs, or examples used in this manual are provided as examples only and

may not apply to all products to which this manual is applicable.

• The products and specifications described in this manual or the content and presentation of the

manual may be changed without notice to improve the product and/or the manual.

• When ordering new copies of the manual, contact a Yaskawa representative or the nearest Yaskawa

sales office and provide the manual number shown on the front cover.

DANGER

Heed the safety messages in this manual.

Failure to comply will result in death or serious injury.

The operating company is responsible for any injuries or equipment damage resulting

from failure to heed the warnings in this manual.

NOTICE

Do not modify the drive or option circuitry.

Failure to comply could result in damage to the drive or option and will void warranty.

Yaskawa is not responsible for any modification of the product made by the user. This

product must not be modified.

Do not expose the drive or option to halogen group disinfectants.

Failure to comply may cause damage to the electrical components in the drive or option.

Do not pack the drive in wooden materials that have been fumigated or sterilized.

Do not sterilize the entire package after the product is packed.

YASKAWA ELECTRIC TOBP 730600 41C 1000-Series Option DO-A3 Installation Manual 7

2 Product Overview

◆About This Product

The Digital Output Option DO-A3 allows the user to expand the number of available digital

outputs to monitor drive run status.

The option has the following features:

• Six photocoupler outputs (48 V, 50 mA or less)

• Two relay outputs (250 Vac, 1 A or less; 30 Vdc, 1 A or less)

◆Applicable Models

The option can be used with the drive models in Table 1.

Table 1 Applicable Models

Drive Series Drive Model Number

A1000 All models

L1000A All models

8 YASKAWA ELECTRIC TOBP 730600 41C 1000-Series Option DO-A3 Installation Manual

3 Receiving

Please perform the following tasks upon receiving the option:

• Inspect the option for damage. Contact the shipper immediately if the option appears

damaged upon receipt.

• Verify receipt of the correct model by checking the model number printed on the option

nameplate. (Refer to Figure 1 on page 9for more information)

• Contact your supplier if you have received the wrong model or the option does not

function properly.

◆Option Package Contents

◆Tools Required for Installation

• A Phillips screwdriver (M3 metric / #1, #2 U.S. standard size) is required to install the

option.

• A straight-edge screwdriver (blade depth: 0.4 mm, width: 2.5 mm) is required to wire the

option terminal block.

• A pair of diagonal cutting pliers.

• A small file or medium-grit sandpaper.

Note: Tools required to prepare option cables for wiring are not listed in this manual.

Description: Option Ground Wires Screws (M3) Installation Manual

–

Quantity: 1331

MANUAL

YASKAWA ELECTRIC TOBP 730600 41C 1000-Series Option DO-A3 Installation Manual 9

4 Option Components

◆Digital Output DO-A3 Option

Figure 1

Figure 1 Digital Output DO-A3 Option Components

◆Terminal Blocks TB1 and TB2

Refer to Table 4 on page 21 for details on TB1 and TB2 terminal functions and signal levels.

A – Terminal block TB1 D – Terminal block TB2

B – Connector (CN5) E – Model number

C – Installation hole F – Ground terminal and installation

hole <1>

<1> The ground wires provided in the option shipping package must be connected during installation.

DO-A3

Underside

P1 P2 P3 P4 P5 P6 PC

M1 M2 M3 M4

TB2

TB1

10 YASKAWA ELECTRIC TOBP 730600 41C 1000-Series Option DO-A3 Installation Manual

5 Installation Procedure

◆Section Safety

DANGER

Electric Shock Hazard

Do not connect or disconnect wiring while the power is on.

Failure to comply will result in death or serious injury.

Disconnect all power to the drive and wait at least the amount of time specified on the

drive front cover safety label. After all indicators are off, measure the DC bus voltage to

confirm safe level, and check for unsafe voltages. The internal capacitor remains charged

after the power supply is turned off.

WARNING

Electrical Shock Hazard

Do not remove the front covers of the drive while the power is on.

Failure to comply could result in death or serious injury.

The diagrams in this section may include options and drives without covers or safety

shields to show details. Be sure to reinstall covers or shields before operating any devices.

Use the option according to the instructions described in this manual.

Do not allow unqualified personnel to use equipment.

Failure to comply could result in death or serious injury.

Maintenance, inspection, and replacement of parts must be performed only by authorized

personnel familiar with installation, adjustment, and maintenance of this product.

Do not touch circuit boards while the power to the drive is on.

Failure to comply could result in death or serious injury.

Tabla de contenidos

Otros manuales de Unidad de control de YASKAWA

YASKAWA

YASKAWA MP2000 Series Manual de usuario

YASKAWA

YASKAWA VIPA HMI cloudPanel H41-L1A41-0 Manual de usuario

YASKAWA

YASKAWA U1000 Series Manual de usuario

YASKAWA

YASKAWA VIPA IM 053IP Manual de usuario

YASKAWA

YASKAWA MP2000 Series Manual de usuario

YASKAWA

YASKAWA CANopen SI-S3/V Manual de usuario

YASKAWA

YASKAWA CM085 Manual de usuario

YASKAWA

YASKAWA S-V Series Manual de usuario

YASKAWA

YASKAWA SLIO CP 042-1IO00 Manual de usuario

YASKAWA

YASKAWA AI-A3 Manual de usuario

YASKAWA

YASKAWA FM 054 Manual de usuario

YASKAWA

YASKAWA S-II Series Manual de usuario

YASKAWA

YASKAWA V1000 SI-EM3D/V Manual de usuario

YASKAWA

YASKAWA VIPA System 200V Manual de usuario

YASKAWA

YASKAWA IM 053PN Manual de usuario

YASKAWA

YASKAWA FM 050 Manual de usuario

YASKAWA

YASKAWA VIPA System SLIO Manual de usuario

YASKAWA

YASKAWA CM006 Manual de usuario

YASKAWA

YASKAWA MECHATROLINK Sigma 2 Series Manual de usuario

YASKAWA

YASKAWA SI-EM3D Manual de usuario

YASKAWA

YASKAWA System 300S+ CPU 315-4PN43 Manual de usuario

YASKAWA

YASKAWA VIPA System SLIO Manual de usuario

YASKAWA

YASKAWA MP2000 Series Manual de usuario

YASKAWA

YASKAWA 62K-JJK0 Manual de usuario

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario