Yamaha YHT-34 Instrucciones de montaje

1ST DRAFT

QUICK-CONNECT GUIDE

YHT-34

YHT-34 QUICK-CONNECT GUIDE

INTRODUCTION

Yamaha developed the YHT-34 A/V Home Theater

package to turn your home into a theater. In addition to

enhancing the sound of a video source, like your TV,

DVD, or VCR, the YHT-34 also superbly reproduces

audio sources, such as a CD player or a cassette deck.

This Quick-Connect Guide will help you get started.

Study the speaker system plan (below), and then use

the interconnect diagrams (on the following pages) to

connect the receiver and speakers to your system.

For the video portion, you will need a television or

monitor. Refer to the Yamaha HTR-5450 Owner’s Manual,

as well as those that came with your other components,

for complete instructions and cautions. Be sure to turn off

all power while making connections.

Save this Quick-Connect Guide for future reference.

NOTE: Label the end of each speaker wire (i.e., left rear, right

front, etc.) before connecting them to the A/V receiver. For wire

runs over 30 feet, use larger 18- or 16-gauge speaker wire.

• Wire strippers (optional)

• Velcro (for secure fastening of NS-AC328 on TV)

• Brackets, toggle bolts, molly anchor screws, or sheet

metal screws (for securing NS-A328 speakers to walls)

NOTE: If you are unsure of how to securely and safely fasten

speakers to a wall, please contact a reliable source about the best

type of hardware for your particular wall's construction.

Secure installation is the purchaser's responsibility.

TOOLS AND PARTS

The YHT-34 Home Theater package consists of

(1) HTR-5450 A/V receiver with (1) universal remote

control, (1) DV-C6280 DVD Player, (4) 2-way NS-A328

front/rear speakers, (1) NS-AC328 2-way center-channel

speaker, 100' of speaker wire, (1) 0.5 m optical cable,

(1) 10' RCA audio cable, (1) YST-SW45 Powered

Subwoofer, and related owner’s manuals. You will

also need:

SPEAKER SYSTEM PLAN

NS-A328

(left side, same height as TV)

NS-A328

(right side, same height as TV)

L = Left Channel

R = Right Channel

C = Center Channel

S = Surround Channel

NS-A328

(on stand or wall, at least

ear level or preferably higher)

NS-A328

(on stand or wall, at least

ear level or preferably higher)

8'~10' apart

NS-AC328

(on top or below TV)

6'~8' apart

Couch

Listening Area

Sub

YST-SW45 Subwoofer (on floor)

YHT-34 QUICK-CONNECT GUIDE

CONNECTING AUDIO COMPONENTS

NOTE: For your convenience, the Yamaha HTR-5450 receiver is equipped with

two switched ac outlets (100 W max.). If desired, use them to power on connected

components (e.g.,CD player) each time the receiver is turned on. However, do not

use them for components equipped with clocks (e.g.,VCR).

Yamaha HTR-5450 Receiver (Rear Panel)

SWITCHED

100W MAX.

TOTAL

AC OUTLETS

SPEAKERS

MAIN

+–

R L

–+

CENTER REAR

(SURROUND)

–

IMPEDANCE SELECTOR

SET BEFORE POWER ON

MAIN A OR B: 4

MIN. /SPEAKER

A +B: 8

MIN. /SPEAKER

CENTER

: 6

MIN. /SPEAKER

REAR

: 6

MIN. /SPEAKER

MAIN A OR B: 8

MIN. /SPEAKER

A +B:

MIN. /SPEAKER

CENTER

: 8

MIN. /SPEAKER

REAR

: 8

MIN. /SPEAKER

AM ANT GND

FM ANT

UNBAL.

TUNER

OUT(REC)IN(PLAY)

AUX

MD/CD-R D-TV/CBL

AUDIO SIGNAL

VCR 1

OUT

DVD

S VIDEO

VIDEO

MONITOR OUT

DVD D-TV/CBL IN VCR 1OUT

VIDEO SIGNAL

SUB

WOOFER

OUTPUT

MAIN CENTER

SUB WOOFER

SURROUND

6CH INPUT

DIGITAL

OUTPUT

DVD

MD/CD-R

D-TV/CBL

OPTICAL

MD/CD-R

OPTICAL

COAXIAL

DIGITAL

INPUT

MAINS

OUT(REC)IN(PLAY)

MD/CD-R

L Out

Use RCA Audio Cables For Audio Interconnections

R Out

L Out* R Out*

* Use Playback Or Line Out

** Use Line In

L In** R In**

RCA Cable Color Codes

Yellow = Video

White = Left Audio

Red = Right Audio

CD Player (Changer)

Cassette Deck,

CD or MD Recorder

YHT-34 QUICK-CONNECT GUIDE

CONNECTING THE YHT-34 SPEAKERS

NS-A328

(Front Right)

NS-AC328

(Center Channel)

NS-A328

(Surround Right)

NS-A328

(Surround Left)

NS-A328

(Front Left)

Yamaha HTR-5450

A/V Receiver

(Rear Panel

Speaker Terminals)

Set IMPEDANCE Selector

to right position

−

−−

−

Cntr R

Surround

Main Spkrs.

YST-SW45

(Subwoofer Rear)

INPUT2 AUTO

STANDBY

OFF

LOW HIGH

Clear

Wire

Clear/

Stripe

Wire

Clear

Wire

Clear/

Stripe

Wire

Clear

Wire

Clear/

Stripe

Wire

Clear

Wire

Clear/

Stripe

Wire

Clear

Wire

Clear/

Stripe

Wire

RCA Audio Cable

(included)

Speaker

Wiring

Initial Settings

(on Front Panel – also

see page 9)

❶Strip 1⁄4" off ends of

speaker wires.

❷Loosen terminals.

❸Insert speaker wires;

tighten terminals.

❶

❸

❷

RED = positive (+)

use clear wire

BLK = negative (–)

use clear with

white stripe wire

HIGH CUT

STANDBY/ON

50 Hz 150 Hz

VOLUME

010

YHT-34 QUICK-CONNECT GUIDE

CONNECTING VIDEO CABLES FOR VIDEO COMPONENTS

NOTE: When using a hi-fi stereo VCR, set the Tuner/Line switch

(on the VCR) to Line position to record from another source

connected to the Yamaha HTR-5450 receiver.

Yamaha HTR-5450 Receiver (Rear Panel)

SWITCHED

100W MAX.

TOTAL

AC OUTLETS

SPEAKERS

MAIN

+–

R L

–+

CENTER REAR

(SURROUND)

–

IMPEDANCE SELECTOR

SET BEFORE POWER ON

MAIN A OR B: 4

MIN. /SPEAKER

A +B: 8

MIN. /SPEAKER

CENTER

: 6

MIN. /SPEAKER

REAR

: 6

MIN. /SPEAKER

MAIN A OR B: 8

MIN. /SPEAKER

A +B:

MIN. /SPEAKER

CENTER

: 8

MIN. /SPEAKER

REAR

: 8

MIN. /SPEAKER

AM ANT GND

FM ANT

UNBAL.

TUNER

OUT(REC)IN(PLAY)

AUX

MD/CD-R D-TV/CBL

AUDIO SIGNAL

VCR 1

OUT

DVD

S VIDEO

VIDEO

MONITOR OUT

DVD D-TV/CBL IN VCR 1OUT

VIDEO SIGNAL

SUB

WOOFER

OUTPUT

MAIN CENTER

SUB WOOFER

SURROUND

6CH INPUT

DIGITAL

OUTPUT

DVD

MD/CD-R

D-TV/CBL

OPTICAL

MD/CD-R

OPTICAL

COAXIAL

DIGITAL

INPUT

MAINS

VIDEO

MONITOR OUT

DVD D-TV/CBL IN VCR 1OUT

VIDEO SIGNAL

RCA Cable Color Codes

Yellow = Video

White = Left Audio

Red = Right Audio

Use RCA Video Cables And Jacks For Video Interconnections

Optional 75-ohm

Coaxial Cable

Hi-Fi Stereo VCR

Video In Video Out

Video Out

ANT In

ANT Out

(RF Out)

Video In

Monitor/TV

Satellite Receiver

(or Video Game)

YHT-34 QUICK-CONNECT GUIDE

CONNECTING THE YAMAHA DV-C6280 DVD PLAYER

*Analog Audio Out connections are required for playback of CD-Rs and

recording from DVD to VCR.

Dolby Digital is a trademark of Dolby Laboratories Licensing Corporation.

DTS is a trademark of DTS Technology LLC.

Yamaha HTR-5450 Receiver (Rear Panel)

SWITCHED

100W MAX.

TOTAL

AC OUTLETS

SPEAKERS

MAIN

–

R L

–

CENTER REAR

(SURROUND)

–

IMPEDANCE SELECTOR

SET BEFORE POWER ON

MAIN A OR B: 4

MIN. /SPEAKER

A +B: 8

MIN. /SPEAKER

CENTER

: 6

MIN. /SPEAKER

REAR

: 6

MIN. /SPEAKER

MAIN A OR B: 8

MIN. /SPEAKER

A +B:

MIN. /SPEAKER

CENTER

: 8

MIN. /SPEAKER

REAR

: 8

MIN. /SPEAKER

AM ANT GND

FM ANT

UNBAL.

TUNER

OUT(REC)IN(PLAY)

AUX

MD/CD-R D-TV/CBL

AUDIO SIGNAL

VCR 1

OUT

DVD

S VIDEO

VIDEO

MONITOR OUT

DVD D-TV/CBL IN VCR 1OUT

VIDEO SIGNAL

SUB

WOOFER

OUTPUT

MAIN CENTER

SUB WOOFER

SURROUND

6CH INPUT

DIGITAL

OUTPUT

DVD

MD/CD-R

D-TV/CBL

OPTICAL

MD/CD-R

OPTICAL

COAXIAL

DIGITAL

INPUT

MAINS

Yamaha DV-C6280 DVD Player (Rear Panel)

REMOTE

CONTROL

OUT IN

COMPONENT

VIDEO OUT

AUDIO

OUT

SUB

WOOFER

VIDEO

S VIDEO

DTS

COAXIAL OPTICAL

PCM/ DIGITAL

Analog Out*

DVD

VIDEO SIGNAL

AUDIO SIGNAL

DVD

OPTICAL

DVD

MD/CD-R

D-TV/CBL

❶

Remove dust cap.

❷

Align plug with terminal

and insert cable.

NOTES:

• On both ends of the optical cable, align and firmly insert

each plug into its mating terminal.

• During connection, do not bend the optical cable.

• Keep dust caps and reattach them if terminals are not used.

NOTE: Use the optical connection to enjoy 5.1-channel surround sound

found on DVDs recorded in the Dolby Digital or DTS Digital Surround format.

Connecting Optical Cable

Optical Cable

(Included)

Use the Included RCA Cables for Analog and Video

Connections Between the DVD Player and Receiver.

RCA Cable Color Codes

Yellow = Video

White = Left Audio

Red = Right Audio

YHT-34 QUICK-CONNECT GUIDE

CONNECTING AUDIO CABLES FOR VIDEO COMPONENTS

NOTE: When using a hi-fi stereo VCR, set the Tuner/Line switch (on the VCR) to Line

position to record from another source connected to the Yamaha HTR-5450 receiver.

Yamaha HTR-5450 Receiver (Rear Panel)

SWITCHED

100W MAX.

TOTAL

AC OUTLETS

SPEAKERS

MAIN

–

R L

–

CENTER REAR

(SURROUND)

–

IMPEDANCE SELECTOR

SET BEFORE POWER ON

MAIN A OR B: 4

MIN. /SPEAKER

A +B: 8

MIN. /SPEAKER

CENTER

: 6

MIN. /SPEAKER

REAR

: 6

MIN. /SPEAKER

MAIN A OR B: 8

MIN. /SPEAKER

A +B:

MIN. /SPEAKER

CENTER

: 8

MIN. /SPEAKER

REAR

: 8

MIN. /SPEAKER

AM ANT GND

FM ANT

UNBAL.

TUNER

OUT(REC)IN(PLAY)

AUX

MD/CD-R D-TV/CBL

AUDIO SIGNAL

VCR 1

OUT

DVD

S VIDEO

VIDEO

MONITOR OUT

DVD D-TV/CBL IN VCR 1OUT

VIDEO SIGNAL

SUB

WOOFER

OUTPUT

MAIN CENTER

SUB WOOFER

SURROUND

6CH INPUT

DIGITAL

OUTPUT

DVD

MD/CD-R

D-TV/CBL

OPTICAL

MD/CD-R

OPTICAL

COAXIAL

DIGITAL

INPUT

MAINS

D-TV/CBL

AUDIO SIGNAL

VCR 1

OUT

Audio

L Out

Audio

R Out

Audio

L In

Audio

R In

Use RCA Audio Cables And Jacks For Audio Interconnections.

RCA Cable Color Codes

Yellow = Video

White = Left Audio

Red = Right Audio

Audio L Out

Audio R Out

Hi-Fi Stereo VCR

Satellite Receiver

(or Video Game)

YHT-34 QUICK-CONNECT GUIDE

CABLE HOOK-UP(BASIC AND PREMIUM CHANNELS)

NOTE: When using a hi-fi stereo VCR, set the Tuner/Line

switch (on the VCR) to Line position to record from another

source connected to the Yamaha HTR-5450 receiver.

Yamaha HTR-5450 Receiver (Rear Panel)

SWITCHED

100W MAX.

TOTAL

AC OUTLETS

SPEAKERS

MAIN

–

R L

–

CENTER REAR

(SURROUND)

–

IMPEDANCE SELECTOR

SET BEFORE POWER ON

MAIN A OR B: 4

MIN. /SPEAKER

A +B: 8

MIN. /SPEAKER

CENTER

: 6

MIN. /SPEAKER

REAR

: 6

MIN. /SPEAKER

MAIN A OR B: 8

MIN. /SPEAKER

A +B:

MIN. /SPEAKER

CENTER

: 8

MIN. /SPEAKER

REAR

: 8

MIN. /SPEAKER

AM ANT GND

FM ANT

UNBAL.

TUNER

OUT(REC)IN(PLAY)

AUX

MD/CD-R D-TV/CBL

AUDIO SIGNAL

VCR 1

OUT

DVD

S VIDEO

VIDEO

MONITOR OUT

DVD D-TV/CBL IN VCR 1OUT

VIDEO SIGNAL

SUB

WOOFER

OUTPUT

MAIN CENTER

SUB WOOFER

SURROUND

6CH INPUT

DIGITAL

OUTPUT

DVD

MD/CD-R

D-TV/CBL

OPTICAL

MD/CD-R

OPTICAL

COAXIAL

DIGITAL

INPUT

MAINS

IN VCR 1OUT

VIDEO SIGNAL

VCR 1

OUT

IN VCR 1OUT

VIDEO SIGNAL

VCR 1

OUT

Audio

L In

Audio R InAudio

L Out

Audio

R Out

RCA Audio Cables

ANT In Video In

Video Out

Basic Cable

(From Wall Jack)

ANT In

Premium Cable

(From Wall Jack)

(Channel 3 or 4

Output)

RCA Cable Color Codes

Yellow = Video

White = Left Audio

Red = Right Audio

RCA Video Cables

Audio

L In

Audio R InAudio

L Out

Audio

R Out

RCA Audio Cables

Video In

Video Out

RCA Video Cables

Hi-Fi Stereo VCR

(Tuner set to Channel 3 or 4)

Descrambler

Converter

Box

YHT-34 QUICK-CONNECT GUIDE

INITIAL ADJUSTMENT OFTHE YST-SW45 SUBWOOFER

To achieve optimum volume balance between the

YST-SW45 Subwoofer and the NS-A328 Main Speakers,

perform the following procedure:

1. Insert the YST-SW45’s power plug into an ac outlet.

2. On the YST-SW45’s rear panel, slide the POWER

switch to ON.

3. On the YST-SW45’s front panel, set the VOLUME

control to 0 (minimum setting), the HIGH CUT

control to its midpoint position, and press the

STANDBY/ON switch to ON. Then power on all

other components.

OFF

To AC Outlet

YST-SW45 Subwoofer

(Rear Panel)

POWER

OUTPUT

TO SPEAKERS

INPUT 2 AUTO

STANDBY

LOW

OFF

HIGH

FROM AMPLIFIER

INPUT 1

❸

❷

❶

HIGH CUT

STANDBY/ON

50 Hz 150 Hz

VOLUME

010

Initial Settings

(on Front Panel)

OFF

POWER

4. Play an audio source and adjust the HTR-5450’s

VOLUME control to a desired listening level.

5. On the YST-SW45’s front panel, increase the

VOLUME control gradually to adjust the balance

the volume between the YST-SW45 Subwoofer and

the NS-A328 Main Speakers.

NOTE: Once the volume is balanced between the

subwoofer and the main speakers, you can adjust the

volume of your whole sound system by using the

HTR-5450's VOLUME control.

YHT-34 QUICK-CONNECT GUIDE

PROGRAMMING THE UNIVERSAL REMOTE CONTROL

SETTING UPCOMPONENTS

Perform the procedure for each component you own.

At the end of each step 5, the remote control’s processor

will automatically assign the selected component’s

control functions to its own buttons, ready for your use.

SETTING UPYOUR TV

1. Turn on the television set and look up a setup code

for your brand of television (codes are located at the

back of the HTR-5450 Owner’s Manual).

2. On the remote control, press TV.

3. Press and hold both VOLUME buttons at least four

seconds until the indicator LED flashes twice.

4. Using the keypad, enter the four-digit setup code.

The indicator LED will flash twice after your entry.

If the LED did not flash twice, repeat steps 3 and 4.

5. To verify the code works, aim the remote control at

the television set, press TV, and then press POWER.

The television set should turn off. If it doesn’t

respond, use another code for the same manufac-

turer and repeat steps 3 through 5.

The YHT-34 Home Theater package includes a univer-

sal remote control. It comes pre-programmed with

factory codes to control your HTR-5450 receiver and

most Yamaha audio components. To program other

brands of components (i.e., TV, VCR, etc.) or if your

Yamaha unit does not respond, you will need to

program the remote control with the manufacturer’s

codes (listed on the back pages of the HTR-5450

Owner’s Manual).

NOTE: The universal remote control is designed to control

most major brands of audio and video components. For other

units, use the original remote control supplied with the product.

POWER ON

1. Load the supplied batteries into the remote control.

2. Aim the remote control at the receiver, press AMP/

TUNER, and then press POWER.

3. The receiver should turn on.

Indicator LED

Use Keypad

To Enter

Setup Codes

Turns On

Component’s

Power

Component

Selector

Buttons

Use To Enter

Setup Mode

Use To Enter

Setup Mode

Tabla de contenidos

Otros manuales de Sistema de altavoces de Yamaha

Yamaha

Yamaha VXL1B-24 Manual de usuario

Yamaha

Yamaha KMS-3000 Manual de usuario

Yamaha

Yamaha NS-P41 Manual de usuario

Yamaha

Yamaha YST-MS55D Manual de usuario

Yamaha

Yamaha YRS-700 Manual de usuario

Yamaha

Yamaha Soavo-2 Manual de usuario

Yamaha

Yamaha NS-125FPN Manual de usuario

Yamaha

Yamaha NS-C200 Manual de usuario

Yamaha

Yamaha NS-PA160 Manual de usuario

Yamaha

Yamaha NX-A01 - Speaker Sys Manual de usuario

Yamaha

Yamaha YSP-1600 Manual de usuario

Yamaha

Yamaha NX-B150 Manual de usuario

Yamaha

Yamaha IF2115/64 Manual de usuario

Yamaha

Yamaha SR-C30A Manual de usuario

Yamaha

Yamaha IF2112-64 Manual de usuario

Yamaha

Yamaha NX-E70 Manual de usuario

Yamaha

Yamaha MSP3A Manual de usuario

Yamaha

Yamaha NS-6490 Manual de usuario

Yamaha

Yamaha NS-LC8 Manual de usuario

Yamaha

Yamaha YAS-209 Manual de usuario

Yamaha

Yamaha S112V Manual de usuario

Yamaha

Yamaha IF2115M/64 Manual de usuario

Yamaha

Yamaha YAS-201 Manual de usuario

Yamaha

Yamaha NS-5 Manual de usuario

Manuales populares de Sistema de altavoces de otras marcas

JVC

JVC CA-MXK5R Manual de usuario

LG NB4532B Manual de usuario

JVC

JVC CA-FSH100 Manual de usuario

5Core

5Core Pro Series Manual de usuario

EAW

EAW MQV1394e Manual de usuario

Lynx

Lynx GXR-LA10A Manual de usuario

iLive

iLive ITB066B Manual de usuario

RDX

RDX QuickStation 4 Manual de usuario

Electro-Voice

Electro-Voice S-122 Manual de usuario

Sven

Sven SPS-619 GOLD Manual de usuario

Pioneer

Pioneer CS-7070 Manual de usuario

EAW

EAW UB82e Manual de usuario

Sondpex

Sondpex Active Speaker System and Digital Music... Manual de usuario

JVC

JVC NX-PN7 Manual de usuario

Marshall Amplification

Marshall Amplification AR-DM61-BT Manual de usuario

SE Audiotechnik

SE Audiotechnik I-LINE Manual de usuario

Gemini

Gemini WRX-843 Series Manual de usuario

TCL

TCL 6100 Series Manual de usuario