Xerox Stacker 701P98048 Manual de usuario



Stacker 1000

Operator Manual

701P98048

Welcome!

Congratulations on acquiring the  Stacker 1000. Team

 looks forward to supporting you and helping you increase

your organizational productivity. The integrated features, ease

of operation, and reliability of the  Stacker 1000 allows you

to concentrate on your business and leave the printing and

finishing to the  Stacker 1000.

This user manual provides all the necessary information

required for operating and using the  Stacker 1000.

Your Team  support group is available to you for further

assistance. Call our experts at the appropriate phone number

listed at the right.

The following information is needed whenever you call :

Customer Account Number:____________________________

Stacker Serial Number: _______________________________

In order to locate the Stacker Serial Number, refer to the

section of this operator manual entitled “Technical data.”



®, The Document Company™, the stylized



™, Stacker 1000®, 8830™, and any

identifying product names and numbers herein are trademarks of



Corporation.

Printer Serial Number:_________________________________

In order to locate the Printer Serial Number, refer to the printer

operator manual.

All service calls should be reported under the printer serial

number.

For information or assistance on your 

Stacker 1000, call:

Local Telephone Number: ______________________________

A Customer Support Representative will answer any questions

or concerns you may have regarding your  Stacker 1000.

In order to purchase other  equipment,

software, and/or supplies, call:

Local Telephone Number: ______________________________

A  Sales Representative will assist you in evaluating your

needs for other software applications and/or xerographic

equipment which will further increase your productivity.

Stacker 1000 Operator Manual i

Table of contents

Safety notes .......................................................1

Stacker overview ...............................................3

Introduction ...............................................................3

Identifying the stacker parts ....................................3

Stacker operation......................................................4

Switching on the stacker

........................................4

Normal operation

....................................................4

Tray extensions

......................................................4

Media storage compartments

.................................5

Print size information

.............................................5

Problem solving.................................................6

Jam clearance ...........................................................6

Clearing media jams...................................................

Moving the stacker....................................................7

Problem solving ........................................................7

Technical data....................................................8

Stacker relocation.....................................................8

Technical data ...........................................................8

Space requirements....................................................

Dimensions .................................................................

Printer media information..........................................

Stacker capacity.........................................................

Electrical requirements..............................................

Power consumption.................................................

Temperature .............................................................

Heat dissipation .......................................................

Audible noise............................................................

Power cord length....................................................

Features....................................................................

Stacker serial number location.............................. 10

Stacker 1000 Operator Manual

Table of contents

Stacker 1000 Operator Manual 1

Safety notes

The  Stacker 1000 is designed and tested to meet strict

safety requirements. These requirements include safety

agency examination and approval and compliance to any

established environmental standards. Please read the following

instructions carefully before operating the stacker.

Note: In order to ensure safe operation of your stacker,

refer to the instructions, as needed, which are provided

in this operator manual.

Follow all the warnings and instructions which are marked on

or supplied with the product.

Unplug the stacker from the wall outlet before cleaning.

Always use materials which are supplied or approved by Xerox.

The use of other materials may result in poor performance and

could create a hazardous situation.

Do not use aerosol cleaners.

Never use supplies or cleaning materials for any purposes

other than what they were intended. Keep all supplies and

materials out of the reach of children.

Do not use the stacker near water, wet locations, or outdoors.

This product is equipped with a three-wire, grounding-type

plug (in other words, a plug which has a third grounding pin).

This product also is equipped with an additional safety device.

The plug fits into a grounding-type power outlet only. This is a

safety feature. If you are unable to insert the plug into the

outlet, contact your electrician in order to avoid the risk of

electric shock and have the receptacle replaced. Never use a

ground adapter plug to connect the copier to a power source

receptacle which lacks a ground connection terminal.

This stacker must be operated from the type of power source

which is indicated on the marking label. If you are not sure of

the type of power available, consult your local power company.

If an extension cord is used with this stacker, ensure that the

total of the ampere ratings of any products plugged into the

extension cord does not exceed the extension cord ampere

rating. Also, ensure that the total amperage of all products

plugged into the wall outlet does not exceed the outlet

protection.

Do not install the stacker in a direct sunlit area, in a high

humidity or dusty environment, nor in a double-insulated room.

Stacker 1000 Operator Manual

Safety notes

Do not install the stacker where the floor or base is unstable.

The stacker may fall, causing personal injury and/or serious

damage to the stacker.

Never spill liquid of any kind on the stacker.

Do not allow anything to rest on the power cord. Do not locate

this stacker where people step on the cord.

Never remove any covers or guards that require a tool for

removal. There are no operator-serviceable areas within these

covers.

The power supply cord is the disconnect device for this

stacker. Ensure that installation is near the outlet and is easily

accessible.

Never attempt any function that is not specified in this operator

manual or is not directed by an authorized Xerox

representative.

Unplug this stacker from the wall outlet and refer the servicing

of it to qualified service personnel under the following

conditions:

• when the power cord is damaged or frayed;

• if liquid is spilled into the product;

• if the stacker is exposed to rain or water;

• if the stacker is producing unusual noises or odors;

• if the stacker falls over or the cabinet is damaged;

• if the stacker continues to malfunction or not work after the

procedures in this operator manual are performed.

Stacker 1000 Operator Manual 3

Stacker overview

Introduction

The Stacker 1000 is an optional finishing device which may be

used with the  8830 printer, the  8830 Digital

Document System (DDS), or the  Productivity Centre

8233. The illustration below shows the Stacker 1000 with a

 8830 printer.

The Stacker 1000 stacks a maximum of 1000 prints of various

sizes. Print sizes include A (A4) through E (A0). Depending on

the print size, prints are stacked either by:

• Long edge feed (LEF), also called landscape,

• Short edge feed (SEF), also called portrait.

Identifying the stacker parts

Media storage

compartment

(one on each

side of stacker)

Tray

extensions

(for longer-

size prints)

Stacker 1000 Operator Manual

Stacker overview

Stacker operation

6ZLWFKLQJRQWKHVWDFNHU

The stacker is “switched on” by connecting the power cord to

the power outlet.

There is no power switch. The power cord is the on/off

switch.

Once the power cord is connected to the power outlet, the

stacker motor drive and fan initialize.

1RUPDORSHUDWLRQ

As media leaves the printer, the lead edge of the media enters

the stacker. A motion sensor in the stacker detects the lead

edge of the media and the fan and motor are switched on. The

media then is fed into the stacker inclined tray.

When the motion sensor detects the trail edge of the media, the

fan and motor continue to run until the print is fed into the

inclined tray. After the last print output is fed into the stacker

tray, the fan and motor switch off.

7UD\H[WHQVLRQV

The Stacker 1000 is equipped with tray extensions:

These tray extensions are used for E-size (A0) and longer-size

prints.

Tray

extensions

Stacker 1000 Operator Manual 5

Stacker overview

0HGLDVWRUDJHFRPSDUWPHQWV

As stated before, the Stacker 1000 is equipped with two storage

compartments. They are located on each side of the stacker.

These storage compartments may be used to store media,

prints, or other printer supplies, such as toner cartridges.

3ULQWVL]HLQIRUPDWLRQ

As stated before, the Stacker 1000 stacks a maximum of 1000

prints; these prints may be of various media sizes. Depending

on the print size, the stacker can hold the following quantities:

• D-size (A1) landscape prints: 750 maximum

• E-size (A0) portrait prints: 375 maximum

The stacker can actually hold a larger number of prints

than is shown above. The above numbers reflect the

maximum capacity of the 8830 printer with three rolls of the

same type media loaded.

Media storage

compartment

Stacker 1000 Operator Manual

Problem solving

Jam clearance

The stacker does not detect error conditions such as media

jams. If a media jam occurs, the motor drive and blower

switches off, and the stacker no longer accepts media. This is

the only indication that the stacker is no longer functioning.

Media jams may occur as the media is exiting the printer or as

the media is entering the stacker. When jams occur, the

stacker and printer shut down, and the printer displays an error

code.

Media must be cleared from the stacker and the printer, if

necessary, before a print job can continue.

&OHDULQJPHGLDMDPV

Use the following procedure in order to clear a media jam from

the stacker:

1. Move the stacker by pulling the entire stacker outward and

away from the printer.

2. Clear any visible, jammed media from the stacker media

path.

part

of the media is located in the printer media path,

clear the stacker media path first. Refer to the printer

operator manual in order to clear the printer media path.

3. If the media, which is exiting the printer, is still connected to

the media roll inside the printer, cut the media between the

printer and stacker. Refer to the printer operator manual for

more information on how to cut the media.

4. Once the media path is cleared, reposition the stacker

against the printer.

Ensure that the stacker is positioned correctly. The

stacker must be resting against the printer and aligned

with the output area of the printer.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Accesorios de impresora de Xerox

Xerox

Xerox Phaser 6128 MFP Manual de usuario

Xerox

Xerox 980 Instrucciones de montaje

Xerox

Xerox SquareFold 610P729932 Manual de usuario

Xerox

Xerox WorkCentre Pro 123 Manual de usuario

Xerox

Xerox Pasher 7750 Manual de usuario

Xerox

Xerox STACKER 8855/721P Manual de usuario

Xerox

Xerox Versant 4100 Press Manual de usuario

Xerox

Xerox C11 - DocuPrint Color Inkjet Printer Manual de usuario

Xerox

Xerox Phaser 6180MFP Manual de usuario

Xerox

Xerox WorkCentre 118 Manual de usuario

Xerox

Xerox Phaser 6128 MFP Manual de usuario

Xerox

Xerox SquareFold Trimmer Module Manual de usuario

Xerox

Xerox 5500DN - Phaser B/W Laser Printer Manual de usuario

Xerox

Xerox Secure Access Unified ID System Manual de usuario

Xerox

Xerox DocuColor 252 Instrucciones de montaje

Xerox

Xerox 5500DN - Phaser B/W Laser Printer Manual de usuario

Xerox

Xerox Adaptive CMYK+ Kit Manual de usuario

Xerox

Xerox 5500DN - Phaser B/W Laser Printer Manual de usuario

Xerox

Xerox Phaser 6128 MFP Manual de usuario

Xerox

Xerox C11 - DocuPrint Color Inkjet Printer Manual de usuario

Xerox

Xerox 3100MFPX - Phaser B/W Laser Manual de usuario

Xerox

Xerox C11 - DocuPrint Color Inkjet Printer Manual de usuario

Xerox

Xerox Phaser 6180MFP Manual

Xerox

Xerox Telecopier 7033 Manual de usuario

Manuales populares de Accesorios de impresora de otras marcas

Star Micronics

Star Micronics TSP800 Series Manual de usuario

REA

REA JET HR pro 2K Manual de usuario

HP Laserjet,Color Laserjet 4si Manual de usuario

oliser

oliser MS 45 Manual de usuario

Roland

Roland DU2-64 Instrucciones y recetas

Canon

Canon Finisher-T1 Manual de usuario

Sharp

Sharp FO-1MK Manual de usuario

Labelmate

Labelmate PM-300 Manual de usuario

Epson

Epson T6248 Manual de funcionamiento

Epson

Epson OT-BZ20 Manual de usuario

Canon

Canon TonerRobot EP-27 Manual de usuario

Ricoh

Ricoh LCIT RT5100 Guía de inicio rápido

GBC

GBC 16 Series Manual de usuario

Canon

Canon INNER 2-WAY TRAY-E1 Manual de operación y mantenimiento

Develop

Develop SD-509 Manual de usuario

Kyocera

Kyocera KM-6230 Manual

Triumph Adler

Triumph Adler DF-710 Manual

Citizen

Citizen CBM-202PC Series Manual de usuario