Winmate EL Series Manual de usuario

Please read these instructions carefully before using this product, and save this manual for future use.

EL-Series HMI

Freescale® Cortex® A9 i.MX6 Dual Core, 1 GHz

Android 6.0

Model No. W04FA3S-ELT1

W05FA3S-ELT1

W07FA3S-ELT1

W10FA3S-ELH2

W15FA3S-ELA4

User Manual

Document Version 1.3

Document Part No.9152111I1134

EL-Series HMI User Manual

Contents

Preface.................................................................................................................................................3

About This User Manual......................................................................................................................7

Chapter 1: Introduction.......................................................................................................................8

1.1 Introduction..................................................................................................................... 9

1.2 Product Features............................................................................................................. 9

1.3 Package Contents........................................................................................................... 9

1.4 Description of Parts....................................................................................................... 10

Chapter 2: Getting Started................................................................................................................15

2.1 Powering On................................................................................................................. 16

2.2 Connector Description and Pin Assignments................................................................. 17

Chapter 3: Mounting..........................................................................................................................19

3.1 Cable Mounting Considerations .................................................................................... 20

3.2 Safety Precautions........................................................................................................ 20

3.3 Mounting Guide............................................................................................................. 20

Chapter 4: Operating the Device ......................................................................................................25

4.1 Operating System ......................................................................................................... 26

4.2 Multi-Touch................................................................................................................... 26

4.3 System Settings............................................................................................................ 27

4.4 Ethernet........................................................................................................................ 29

4.5 Winmate® Home Manager (WHM)................................................................................ 32

Chapter 5: Software Installation.......................................................................................................37

5.1 Android Debug Bridge (ADB) Driver Installation............................................................ 38

5.2 Installing Android Debug Bridge (ADB) ......................................................................... 46

5.3 Downloading Image Tool............................................................................................... 47

5.4 OTA Update Guide........................................................................................................ 47

5.5 OS Image Update Guide............................................................................................... 51

Chapter 6: Technical Support...........................................................................................................52

6.1 Introduction................................................................................................................... 53

6.2 Problem Report Form................................................................................................- 53 -

Appendix A: Product Specifications................................................................................................54

EL-Series HMI User Manual

Preface

No part of this document may be reproduced, copied, translated, or transmitted in any form or by any

means, electronic or mechanical, for any purpose, without the prior written permission of the original

manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of their respective owners.

Disclaimer

We reserve the right to make changes, without notice, to any product, including circuits and/or software

described or contained in this manual in order to improve design and/or performance. We assume no

responsibility or liability for the use of the described product(s) conveys no license or title under any

patent, copyright, or masks work rights to these products, and make no representations or warranties

that these products are free from patent, copyright, or mask work right infringement, unless otherwise

specified. Applications that are described in this manual are for illustration purposes only. We make no

representation or guarantee that such application will be suitable for the specified use without further

testing or modification.

Warranty

Our warranty guarantees that each of its products will be free from material and workmanship defects

for a period of one year from the invoice date. If the customer discovers a defect, we will, at his/her

option, repair or replace the defective product at no charge to the customer, provide it is returned during

the warranty period of one year, with transportation charges prepaid. The returned product must be

properly packaged in its original packaging to obtain warranty service. If the serial number and the

product shipping data differ by over 30 days, the in-warranty service will be made according to the

shipping date. In the serial numbers the third and fourth two digits give the year of manufacture, and the

fifth digit means the month (e. g., with A for October, B for November and C for December).

For example, the serial number 1W18Axxxxxxxx means October of year 2018.

Customer Service

We provide a service guide for any problem by the following steps: First, visit the website of our

distributor to find the update information about the product. Second, contact with your distributor, sales

representative, or our customer service center for technical support if you need additional assistance.

You may need the following information ready before you call:

Product serial number

Software (OS, version, application software, etc.)

Description of complete problem

The exact wording of any error messages

In addition, free technical support is available from our engineers every business day. We are always

ready to give advice on application requirements or specific information on the installation and

operation of any of our products.

EL-Series HMI User Manual

Advisory Conventions

Four types of advisories are used throughout the user manual to provide helpful information or to alert you

to the potential for hardware damage or personal injury. These are Notes, Important, Cautions, and

Warnings. The following is an example of each type of advisory.

Note:

A note is used to emphasize helpful information

Important:

An important note indicates information that is important for you to know.

Caution/ Attention

A Caution alert indicates potential damage to hardware and explains how to avoid the

potential problem.

Une alerte d’attention indique un dommage possible à l’équipement et explique comment

éviter le problème potentiel.

Warning!/ Avertissement!

An Electrical Shock Warning indicates the potential harm from electrical hazards and how

to avoid the potential problem.

Un Avertissement de Choc Électrique indique le potentiel de chocs sur des emplacements

électriques et comment éviter ces problèmes.

Safety Information

Warning!/ Avertissement!

Always completely disconnect the power cord from your chassis whenever you work with

the hardware. Do not make connections while the power is on. Sensitive electronic

components can be damaged by sudden power surges. Only experienced electronics

personnel should open the PC chassis.

Toujours débrancher le cordon d’alimentation du chassis lorsque vous travaillez sur celui-

ci. Ne pas brancher de connections lorsque l’alimentation est présente. Des

composantes électroniques sensibles peuvent être endommagées par des sauts

d’alimentation. Seulement du personnel expérimenté devrait ouvrir ces chassis.

Caution/ Attention

Always ground yourself to remove any static charge before touching the CPU card.

Modern electronic devices are very sensitive to static electric charges. As a safety

precaution, use a grounding wrist strap at all times. Place all electronic components in

a static-dissipative surface or static-shielded bag when they are not in the chassis.

Toujours verifier votre mise à la terre afin d’éliminer toute charge statique avant de

toucher la carte CPU. Les équipements électroniques moderns sont très sensibles

aux décharges d’électricité statique. Toujours utiliser un bracelet de mise à la terre

comme précaution. Placer toutes les composantes électroniques sur une surface

conçue pour dissiper les charge, ou dans un sac anti-statique lorsqu’elles ne sont pas

dans le chassis.

Alternating Current Mise à le terre !

The Protective Conductor Terminal (Earth Ground) symbol indicates the potential risk of

serious electrical shock due to improper grounding.

Le symbole de Mise à Terre indique le risqué potential de choc électrique grave à la

terre incorrecte.

Preface

For your safety carefully read all the safety instructions before using the device. Keep this user manual

for future reference.

Always disconnect this equipment from any AC outlet before cleaning. Do not use liquid or spray

detergents for cleaning. Use a damp cloth.

For pluggable equipment, the power outlet must be installed near the equipment and must be

easily accessible.

Keep this equipment away from humidity.

Put this equipment on a reliable surface during installation. Dropping it or letting it fall could cause

damage.

The openings on the enclosure are for air convection and to protect the equipment from

overheating.

Do not cover the openings.

Before connecting the equipment to the power outlet make sure the voltage of the power source is

correct.

Position the power cord so that people cannot step on it. Do not place anything over the power

cord.

If the equipment is not used for a long time, disconnect it from the power source to avoid damage

by transient over-voltage.

Never pour any liquid into an opening. This could cause fire or electrical shock.

Never open the equipment. For safety reasons, only qualified service personnel should open the

equipment.

All cautions and warnings on the equipment should be noted.

*Let service personnel to check the equipment in case any of the following problems

appear:

oThe power cord or plug is damaged.

oLiquid has penetrated into the equipment.

oThe equipment has been exposed to moisture.

oThe equipment does not work well or you cannot get it to work according to the

user manual.

oThe equipment has been dropped and damaged.

oThe equipment has obvious signs of breakage.

Do not leave this equipment in an uncontrolled environment where the storage temperature is

below -20°C (-4°F) or above 60°C (140°F). It may damage the equipment.

Caution/Attention

Use the recommended mounting apparatus to avoid risk of injury.

Utiliser l’appareil de fixation recommandé pour éliminer le risque de blessure.

Warning!/ Avertissement!

Only use the connection cords that come with the product. When in doubt, please

contact the manufacturer.

Utiliser seulement les cordons d’alimentation fournis avec le produit. Si vous

doutez de leur provenance, contactez le manufacturier.

Warning!/ Avertissement!

Always ground yourself against electrostatic damage to the device.

Toujours vérifier votre mise à la terre afin que l’équipement ne se décharge pas sur

vous.

Cover workstations with approved anti-static material. Use a wrist strap connected to a

work surface and properly grounded tools and equipment.

Use anti-static mats, heel straps, or air ionizer for added protection.

EL-Series HMI User Manual

Avoid contact with pins, leads, or circuitry.

Turn off power and input signals before inserting and removing connectors or test

equipment.

Keep the work area free of non-conductive materials, such as ordinary plastic assembly

aids and Styrofoam.

Use filed service tools, such as cutters, screwdrivers, and vacuum cleaners that are

conductive.

Always put drivers and PCB’s component side on anti-static foam.

Important Information

Federal Communications Commission Radio Frequency Interface Statement

This device complies with part 15 FCC rules.

Operation is subject to the following two conditions:

This device may not cause harmful interference.

This device must accept any interference received including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a class "B" digital device,

pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at him own expense.

EC Declaration of Conformity

This equipment is in conformity with the requirement of the following EU

legislations and harmonized standards. Product also complies with the

Council directions.

Electromagnetic Compatibility Directive (2014/30/EU)

EN55024: 2010 EN 55022: 2010 Class B

oIEC61000-4-2: 2009

oIEC61000-4-3: 2006+A1: 2007+A2: 2010

oIEC61000-4-4: 2012

oIEC61000-4-5: 2014

oIEC61000-4-6: 2013

oIEC61000-4-8: 2010

oIEC61000-4-11: 2004

EN55022: 2010/AC:2011

EN61000-3-2:2014

EN61000-3-3:2013

Low Voltage Directive (2014/35/EU)

EN 60950-1:2006/A11:2009/A1:2010/A12:2011/ A2:2013

About This User Manual

This User Manual provides information about using the Winmate® EL-Series HMI. This User Manual

applies to the EL-Series HMI –W04FA3S-ELT1, W07FA3S-ELT1, W10FA3S-ELH2, and W15FA3S-

ELA2.

The documentation set for the EL-Series HMI with Freescale® Cortex® A9 i.MX6 Dual Core provides

information for specific user needs, and includes:

EL-Series HMI User Manual –contains detailed description on how to use the HMI device, its

components and features.

EL-Series HMI Quick Start Guide - describes how to get the HMI up and running.

Note:

Some pictures in this guide are samples and can differ from actual

product.

Document Revision History

Version

Date

Note

1.0

25-Jul-2018

Initial document release

1.1

20-Feb-2019

Add 5.6” HMI device.

1.2

20-Mar-2019

Revise specifications

1.3

10-Sep-2019

Revise cutout dimensions

EL-Series HMI User Manual

Chapter 1: Introduction

This chapter gives you product overview, describes features and

hardware specification. You will find all accessories that come

with the HMI in the packing list. Mechanical dimensions and

drawings included in this chapter.

Chapter 1: Introduction

1.1 Introduction

Congratulations on purchasing Winmate® EL-Series HMI. Winmate continues developing new generation

of Human Machine Interfaces for Industry 4.0 and Internet of Things (IoT). Our EL-Series HMI runs on

Android 6.0 operating system that allows installing the latest applications (APPs). There is one USB 2.0

onboard to connect mouse or keyboard, Micro USB OTG for system updates. System memory LPDDR3 of

1 GB ensures stable operation of applications.

With mounting clips for panel mounting there is no need to drill holes in a fixture. This saves you the time

for mounting and guarantee aesthetic look of the wall after the unit gets removed.

1.2 Product Features

Winmate® EL-Series HMI features:

4.3/ 5.6/ 7/ 10.1/ 15.6-inch widescreen panel

Freescale® Cortex® A9 i.MX6 Dual Core, 1 GHz

Android 6.0 operating system

Projected Capacitive (P-CAP) Multi-Touch

Fanless cooling system and ultra-low power consumption

Front IP65 water and dust proof, rear IP22

Mounting clips for quick Installation

Light design for machine automation, smart factory and IoT applications

1.3 Package Contents

Carefully remove the box and unpack your device. Package content may vary based on your order. Please

check if all the items listed below are inside your package. If any of these items are missing or damaged

Standard factory shipment list:

HMI Device

Varies by product

specifications

Quick Start Guide

(Hardcopy)

Part No.9152111I1135

Driver CD & User

Manual (Digital Copy)

Varies by product

specifications

Mounting Clip & Screw

4.3” HMI - 4 pcs, 5.6” HMI - 6 pcs,

7” –7 pcs, 10.1” HMI – 8 pcs, 15.6”

HMI –10 pcs

Part No. 82111E240400

AC Adapter

(12V/ 50W)

Part No. 922D050W12VA

Power Cord

Varies by country

3 pin Terminal Block

Part No.

94J602G020K0

EL-Series HMI User Manual

1.4 Description of Parts

This section describes appearance, connectors’ layout and mechanical dimensions of EL-Series HMI.

Notice that this is a simplified drawing and some components are not marked in detail. Please contact our

sales representative if you need further product information.

EL-Series HMI 4.3” Unit: mm

Dimensions : 121.5 x 82.05 x 42.2

№

Description

№

Description

❶

USB 2.0

❺

USB OTG

❷

RS485

❻

Power Terminal Block

❸

Reset Button

❼

LED Indicator

❹

RJ45/ LAN

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Panel táctil de Winmate

Winmate

Winmate R15IB3S-65EX Manual de usuario

Winmate

Winmate W10IB3S-PCH2AC-PoE S-Series Manual de usuario

Winmate

Winmate R10IBWS-MHP1 Manual de usuario

Winmate

Winmate W15IB3S-EHA4 Manual de usuario

Winmate

Winmate R15IV3S-MR series Manual de usuario

Winmate

Winmate W10IB3S-GSH1 Manual de usuario

Winmate

Winmate Military Series Manual de usuario

Winmate

Winmate R15IK3S-SPC3 Manual de usuario

Winmate

Winmate W10IB3S-PCH2AC-PoE S-Series Manual de usuario

Winmate

Winmate W10RK3S-PCH2LB Manual de usuario

Winmate

Winmate R15IT3S-SPC369 Manual de usuario

Winmate

Winmate R17IK7T-POM1 Manual de usuario

Winmate

Winmate W15IB3S-PTA3 Manual de usuario

Winmate

Winmate R15ID3S-65A1FTE Manual de usuario

Winmate

Winmate B Series Manual de usuario

Winmate

Winmate R10IB3S-SPT269 Manual de usuario

Winmate

Winmate R15IB3S-SPC369 Manual de usuario

Winmate

Winmate W04FA3S-EHT1 Manual de usuario

Winmate

Winmate G-Win Series Manual de usuario

Winmate

Winmate W24IB3S-SPA269 Manual de usuario

Winmate

Winmate R15ID3S-65EX Manual de usuario

Winmate

Winmate W04FA3S-EHT1 Manual de usuario

Winmate

Winmate P Series Manual de usuario

Winmate

Winmate G-WIN Slim IP65 Manual de usuario

Manuales populares de Panel táctil de otras marcas

FlowLine

FlowLine Data loop Manual de usuario

ALPEX

ALPEX AEx-8 P Series Manual de usuario

Ltech

Ltech E5S Manual de usuario

Harman

Harman AMX MODERO S MSD-701-L2 Manual de usuario

Acnodes

Acnodes PC 1150 Manual de usuario

AIS

AIS IP10IA99 series Manual de usuario

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manual de usuario

YASKAWA

YASKAWA TP 610C Manual de usuario

B&R

B&R Power Panel C Series Manual de usuario

Beijer Electronics

Beijer Electronics X2 control Manual de usuario

AXIOMTEK

AXIOMTEK GOT321W-521 Manual de usuario

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manual de usuario

Qomo

Qomo QIT1386 Manual de usuario

DFI

DFI KS104-CD Manual de usuario

AMX

AMX AXP-PPC Guía

Sartorius

Sartorius X3 PR 5410 Manual de usuario

AMX

AMX Modero X Series Manual de usuario

Advantech

Advantech TPC-30 Series Manual de usuario