Wildgame N6E Manual de usuario

Model # N6E

602 Fountain Parkway

Grand Prairie, TX 75050

800.847.8269

“Wildgame Innovations”and the“Button Logo”are TM trademarks of Wildgame Innovations, LLC.

“Sport Responsible” , “Redux” and “Flextime”are TM trademarks of WGI Innovations, LTD. User’s Manual

Infrared Digital Scouting Camera

Includes

Features

USB Cable

2 - Bungee Cords User Manual

Camera UnitFlextime Player

Software

RESOLUTION

FLASH

FLASH RANGE

SENSOR

SENSOR RANGE

IMAGE FORMAT

MEMORY

USB

IMAGE RESOLUTION

POWER SUPPLY

AUXILIARY POWER

BATTERY LIFE

ONBOARD POWER

HOUSING

MOUNTING

REDUX

MAX: 6 MP

30 High Intensity Infrared LED’s

up to 65 feet

Passive Infrared Sensor (PIR) Motion and Heat

up to 60 feet

JPEG - Digital Still / AVI - Digital Video

up to 32GB SD Card (not included)

5-PIN Mini USB style - included

High (6MP)

Medium (4MP)

Low (2MP)

4 C-Cell batteries (not included)

External power port

Estimated up to 3 months (in PIR mode)

Battery life may be reduced in Flextime mode

(depending on Flextime setting)

Built in battery to retain Time and Settings

Weather resistant with rubber gaskets

2 Bungee cords - included

Technology to reduce motion blur during

transition time

page 1

page 2

NOTE: Flextime Player Software is optional.

Flextime files can be played by using most

media players.

Includes

Features

USB Cable

2 - Bungee Cords User Manual

Camera UnitFlextime Player

Software

RESOLUTION

FLASH

FLASH RANGE

SENSOR

SENSOR RANGE

IMAGE FORMAT

MEMORY

USB

IMAGE RESOLUTION

POWER SUPPLY

AUXILIARY POWER

BATTERY LIFE

ONBOARD POWER

HOUSING

MOUNTING

REDUX

MAX: 6 MP

30 High Intensity Infrared LED’s

up to 65 feet

Passive Infrared Sensor (PIR) Motion and Heat

up to 60 feet

JPEG - Digital Still / AVI - Digital Video

up to 32GB SD Card (not included)

5-PIN Mini USB style - included

High (6MP)

Medium (4MP)

Low (2MP)

4 C-Cell batteries (not included)

External power port

Estimated up to 3 months (in PIR mode)

Battery life may be reduced in Flextime mode

(depending on Flextime setting)

Built in battery to retain Time and Settings

Weather resistant with rubber gaskets

2 Bungee cords - included

Technology to reduce motion blur during

transition time

page 1

page 2

NOTE: Flextime Player Software is optional.

Flextime files can be played by using most

media players.

Installing Batteries

Open the door at the bottom of the camera by

unlatching the locking tabs.

With the camera facing open, open the battery

compartment cover by sliding the latch to the

left. (Illustration A and B)

With the bottom of the camera

towards you, load two C-cell batteries

with the positive ends towards you in

the left battery chamber and load two

C-cell batteries with the negative

ends towards you in the right battery

chamber.

Close battery compartment cover. To

latch the cover simply pull the latch

slightly to the left as you close the

battery compartment cover.

Load SD memory card (up to 32GB not

included) into the SD card slot with the

connectors facing up.

Illustration A

Illustration B

POWER

TIPS:

Make sure the SD Card is unlocked (small

switch on the side of the SD Card) or the

camera LCD will read “LOCK”.

page 3

page 4

Installing Batteries

Open the door at the bottom of the camera by

unlatching the locking tabs.

With the camera facing open, open the battery

compartment cover by sliding the latch to the

left. (Illustration A and B)

With the bottom of the camera

towards you, load two C-cell batteries

with the positive ends towards you in

the left battery chamber and load two

C-cell batteries with the negative

ends towards you in the right battery

chamber.

Close battery compartment cover. To

latch the cover simply pull the latch

slightly to the left as you close the

battery compartment cover.

Load SD memory card (up to 32GB not

included) into the SD card slot with the

connectors facing up.

Illustration A

Illustration B

POWER

TIPS:

Make sure the SD Card is unlocked (small

switch on the side of the SD Card) or the

camera LCD will read “LOCK”.

page 3

page 4

Power Save

Power On

Setting Time

Check the battery level icon to ensure

the batteries just installed contain the

proper charge level. If so, you are ok to

proceed with camera use.

To turn the unit ON press and release

the power button.

1. To change date and time, start by

pressing and release the center

navigation button to set the hour.

2. Press the left or right navigation

button to go up or down in sequence.

3. When the hour is set, repeat steps 1

and 2 to set the minutes.

POWER

page 5

page 6

Test Mode

POWER

PIR LED Status Light: During the first

2 minutes of Ready Mode, the red light

will illuminate when a PIR event is

triggered. The red light will blink for

2-3 seconds when photo is taken

during this first 2 minutes. After 2

minutes all indicator lights will turn

off until a button is pressed.

1. LCD Ready Mode: The camera will

automatically enter Ready Mode if a

button is not pressed for greater than

30 seconds. The status lights will

illuminate for a total of 2 minutes.

After 30 seconds without any buttons

being pushed, the LCD will turn off and

camera enters into Power Save or

Ready Mode.

The LCD screen can be awakened by

pressing the Power button briefly.

Note: The LCD will not “wake up” when

camera is writing to memory.

Power Save

Power On

Setting Time

Check the battery level icon to ensure

the batteries just installed contain the

proper charge level. If so, you are ok to

proceed with camera use.

To turn the unit ON press and release

the power button.

1. To change date and time, start by

pressing and release the center

navigation button to set the hour.

2. Press the left or right navigation

button to go up or down in sequence.

3. When the hour is set, repeat steps 1

and 2 to set the minutes.

POWER

page 5

page 6

Test Mode

POWER

PIR LED Status Light: During the first

2 minutes of Ready Mode, the red light

will illuminate when a PIR event is

triggered. The red light will blink for

2-3 seconds when photo is taken

during this first 2 minutes. After 2

minutes all indicator lights will turn

off until a button is pressed.

1. LCD Ready Mode: The camera will

automatically enter Ready Mode if a

button is not pressed for greater than

30 seconds. The status lights will

illuminate for a total of 2 minutes.

After 30 seconds without any buttons

being pushed, the LCD will turn off and

camera enters into Power Save or

Ready Mode.

The LCD screen can be awakened by

pressing the Power button briefly.

Note: The LCD will not “wake up” when

camera is writing to memory.

Setting Date

Trigger Flextime

Location

1. Press the center navigation button

after setting the minute to change the

Day.

2. Press the left or right navigation

button to go up or down in sequence.

3. When the DAY is set, repeat steps 1

and 2 to set the Month and Year.

POWER

1. Press the center navigation button

while Location is selected. The first

character will be blinking.

1. Press the center navigation button

while Trigger is selected. The

highlighted option will be blinking.

2. Press the left or right navigation

button to move to different options.

Press the center navigation button to

save the setting.

2. Press the left or right navigation

button to go up or down in sequence.

Press the center navigation button

when the character shown is what you

want and move to the next character.

3. Repeat steps 1 and 2 to set the rest of

the characters. Press the center

navigation button to skip spaces and

save the location name.

POWER

1. Press the center navigation button

while Flextime is selected. The

highlighted option will be blinking.

2. Press the left or right navigation

button to move to different options.

Press the center navigation button to

save the setting.

POWER

page 7

page 8

TRIGGER:

PIR MODE: Takes a photo or video only

when the PIR sensor is triggered.

FLEXTIME (Time Lapse): Takes time lapse

images at set intervals during the key

movement periods of the day, depending

on your Flextime settings.

BOTH: Both PIR and Flextime are active.

The Interval setting is set by the Delay

Setting on the camera with a 1 minute

minimum Flextime delay. See chart on

the next page for Flextime options.

NOTE: Camera needs at least 48 hours

in the field to acclimate to the environ-

ment for Flextime to function properly.

Setting Date

Trigger Flextime

Location

1. Press the center navigation button

after setting the minute to change the

Day.

2. Press the left or right navigation

button to go up or down in sequence.

3. When the DAY is set, repeat steps 1

and 2 to set the Month and Year.

POWER

1. Press the center navigation button

while Location is selected. The first

character will be blinking.

1. Press the center navigation button

while Trigger is selected. The

highlighted option will be blinking.

2. Press the left or right navigation

button to move to different options.

Press the center navigation button to

save the setting.

2. Press the left or right navigation

button to go up or down in sequence.

Press the center navigation button

when the character shown is what you

want and move to the next character.

3. Repeat steps 1 and 2 to set the rest of

the characters. Press the center

navigation button to skip spaces and

save the location name.

POWER

1. Press the center navigation button

while Flextime is selected. The

highlighted option will be blinking.

2. Press the left or right navigation

button to move to different options.

Press the center navigation button to

save the setting.

POWER

page 7

page 8

TRIGGER:

PIR MODE: Takes a photo or video only

when the PIR sensor is triggered.

FLEXTIME (Time Lapse): Takes time lapse

images at set intervals during the key

movement periods of the day, depending

on your Flextime settings.

BOTH: Both PIR and Flextime are active.

The Interval setting is set by the Delay

Setting on the camera with a 1 minute

minimum Flextime delay. See chart on

the next page for Flextime options.

NOTE: Camera needs at least 48 hours

in the field to acclimate to the environ-

ment for Flextime to function properly.

PIR Mode

1. Press the center navigation button

while PIR Mode is selected. The

highlighted option will be blinking.

PIR MODE:

STILL: The camera takes still

photographs.

VIDEO: The camera takes 30

second videos.

2. Press the left or right navigation

button to move to different options.

Press the center navigation button to

save the setting.

POWER

PIR Active

1. Press the center navigation button

while PIR Active is selected. The

highlighted option will be blinking.

PIR ACTIVE:

24 HR: The PIR can be active at all

times.

DAY: The PIR can be active in

daylight hours only.

NIGHT: The PIR can be active in

nighttime hours only.

2. Press the left or right navigation

button to move to different options.

Press the center navigation button to

save the setting.

POWER

page 9

page 10

Flextime period:

1. 15 min before Sunrise

to 1 hour after Sunrise.

2. 1 hour before Sunset

to 15 min after Sunset

Flextime period:

1. 15 min before Sunrise

to 1 hour after Sunrise.

2. 1 hour before Sunset

to 15 min after Sunset

Flextime period:

1. 15 min before Sunrise

to 15 min after Sunset

1 HOUR

AFTER

SUNRISE

1 HOUR

BEFORE

SUNSET

15 MINUTES

BEFORE

SUNRISE

15 MINUTES

AFTER

SUNSET

FLEX

TIME FLEX

TIME

FLEX

TIME FLEX

TIME

PIR

INACTIVE

Camera is inactive before and after Flextime periods. Flextime is active twice a day.

Flextime is active twice a day.

Flextime is active during daytime.

Camera is in PIR mode before and after Flextime periods.

INACTIVE

PIR

FLEXTIME

PIR PIR

FLEXTIME selected

BOTH selected

INTERVAL

Flextime + PIR period:

1. 15 min before Sunrise

to 1 hour after Sunrise.

2. 1 hour before Sunset

to 15 min after Sunset

Flextime + PIR period:

1. 15 min before Sunrise

to 1 hour after Sunrise.

2. 1 hour before Sunset

to 15 min after Sunset

Flextime + PIR period:

1. 15 min before Sunrise

to 15 min after Sunset

INTERVAL

1 HOUR

AFTER

SUNRISE

1 HOUR

BEFORE

SUNSET

15 MINUTES

BEFORE

SUNRISE

15 MINUTES

AFTER

SUNSET

FLEX

TIME FLEX

TIME

FLEX

TIME FLEX

TIME

PIR

PIR PIR

PIR PIRPIR

PIR

FLEXTIME & PIR

PIR PIR

Camera is inactive before and after Flextime + PIR periods. Flextime + PIR is active twice a day.

Camera is in PIR mode before and after Flextime + PIR periods. Flextime + PIR is active twice a day.

Camera is in PIR mode before and after Flextime + PIR periods. Flextime + PIR is active during daytime.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cámara de exploración de Wildgame

Wildgame

Wildgame N2E Manual de usuario

Wildgame

Wildgame KICKER Manual de usuario

Wildgame

Wildgame Titan Extreme Manual de usuario

Wildgame

Wildgame Prizm Manual de usuario

Wildgame

Wildgame I6 Manual de usuario

Wildgame

Wildgame Shadow Manual de usuario

Wildgame

Wildgame LO8 Manual de usuario

Wildgame

Wildgame C8B5 Manual de usuario

Wildgame

Wildgame DRT Manual de usuario

Wildgame

Wildgame r12i20 Manual de usuario

Wildgame

Wildgame W6E Manual de usuario

Wildgame

Wildgame W5ECA Manual de usuario

Wildgame

Wildgame Edge Manual de usuario

Wildgame

Wildgame KP10B8-7 Manual de usuario

Wildgame

Wildgame SC20i20-7 Manual de usuario

Wildgame

Wildgame IR2 Manual de instalación y operación

Wildgame

Wildgame Scrapeline Manual de usuario

Wildgame

Wildgame 360 Cam Manual de usuario

Wildgame

Wildgame SPARK Manual de usuario

Wildgame

Wildgame SC20B20-7 Manual de usuario

Wildgame

Wildgame R12B20-7 Manual de usuario

Wildgame

Wildgame W6EF Manual de usuario

Wildgame

Wildgame Cloak Pro Manual de usuario

Wildgame

Wildgame Innovations Mirage Manual de usuario

Manuales populares de Cámara de exploración de otras marcas

Nestbox

Nestbox C13 Manual de usuario

Wildview

Wildview STC-TGL1 Manual de usuario

Stealth Cam

Stealth Cam CORE STC-Z3IRTL Manual de usuario

Suntek

Suntek HC-800M Manual de usuario

Spypoint

Spypoint G4 Manual de usuario

Duramaxx

Duramaxx 10029765 Manual de usuario

Brecom

Brecom C2400 Manual de usuario

BlazeVideo

BlazeVideo A280W Manual de usuario

Bestok

Bestok 5210GM Manual de usuario

GardePro

GardePro X60P Manual de usuario

Delta-Opti

Delta-Opti HC-SG880MK-18MHD Manual de usuario

PNI

PNI HUNTING 280C Manual de usuario

Muddy

Muddy Pro-Cam 14 Manual de usuario

Bresser

Bresser 3310006 Manual de usuario

Recon Outdoors

Recon Outdoors HS410 Manual de usuario

Braun

Braun 57660 Manual de usuario

Spypoint

Spypoint FLEX Manual de usuario

Hieha

Hieha WiFi900Pro Instrucciones de montaje