WIKA Twin-Temp 54 Manual de usuario
D
GB
Operating instructions
Betriebsanleitung
Mode d'emploi
Manual de instrucciones
E
F
Twin-Temp
Twin-Temp, model 54
Combined bimetal thermometer, model 54
Kombi-Bimetall-Thermometer, Typ 54
Thermomètre bimétallique combiné, type 54
Termómetro bimetálico combinado, modelo 54
2
D
GB
E
F
Operating instructions model 54
Page 3 - 16
Betriebsanleitung Typ 54
Seite 17 - 30
Mode d'emploi type 54
Page 31 - 44
Manual de instrucciones modelo 54
Página 45 - 58
© 2011 WIKA Alexander Wiegand SE & Co. KG
All rights reserved. / Alle Rechte vorbehalten.
WIKA® is a registered trademark in various countries.
WIKA® ist eine geschützte Marke in verschiedenen Ländern.
Prior to starting any work, read the operating instructions!
Keep for later use!
Vor Beginn aller Arbeiten Betriebsanleitung lesen!
Zum späteren Gebrauch aufbewahren!
Lire le mode d‘emploi avant de commencer toute opération !
A conserver pour une utilisation ultérieure !
¡Leer el manual de instrucciones antes de comenzar cualquier trabajo!
¡Guardar el manual para una eventual consulta!
14004105.01 05/2011 GB/D/F/E
WIKA operating instructions model 54, Twin-Temp
GB
14004105.01 05/2011 GB/D/F/E
WIKA operating instructions model 54, Twin-Temp 3
Contents
1. General information 4
2. Safety 6
3. Specications 8
4. Design and function 8
5. Transport, packaging and storage 9
6. Commissioning, operation 10
7. Maintenance and cleaning 11
8. Faults 12
9. Dismounting, return and disposal 13
10. Accessories 15
Contents
GB
14004105.01 05/2011 GB/D/F/E
4 WIKA operating instructions model 54, Twin-Temp
1. General information
■
The combined bimetal thermometer described in these operating
instructions has been designed and manufactured using state-of-
the-art technology. All components are subject to stringent quality
and environmental criteria during production. Our management
systems are certied to ISO 9001 and ISO 14001.
■
These operating instructions contain important information on
handling the combined bimetal thermometer. Working safely requires
that all safety instructions and work instructions are observed.
■
Observe the local accident prevention regulations and
general safety regulations, in eect for the combined bimetal
thermometer‘s range of use.
■
The operating instructions are part of the product and must be kept
in the immediate vicinity of the combined bimetal thermometer and
readily accessible to skilled personnel at any time.
■
Skilled personnel must have carefully read and understood the
operating instructions prior to beginning any work.
■
The manufacturer‘s liability is void in the case of any damage
caused by using the product contrary to its intended use,
non-compliance with these operating instructions, assignment
of insuciently qualied skilled personnel or unauthorised
modications to the combined bimetal thermometer.
■
The general terms and conditions contained in the sales
documentation shall apply.
■
Subject to technical modications.
■
Further information:
- Internet address: www.wika.de / www.wika.com
- Relevant data sheet: TV 15.01
1. General information
GB
14004105.01 05/2011 GB/D/F/E
WIKA operating instructions model 54, Twin-Temp 5
Explanation of symbols
WARNING!
... indicates a potentially dangerous situation that can
result in serious injury or death, if not avoided.
CAUTION!
... indicates a potentially dangerous situation that can
result in light injuries or damage to equipment or the
environment, if not avoided.
Information
… points out useful tips, recommendations and informati-
on for ecient and trouble-free operation.
WARNING!
... indicates a potentially dangerous situation that can
result in burns caused by hot surfaces or liquids if not
avoided.
1. General information
GB
14004105.01 05/2011 GB/D/F/E
6 WIKA operating instructions model 54, Twin-Temp
2. Safety
WARNING!
Before installation, commissioning and operation, ensure
that the appropriate bimetal thermometer has been
selected in terms of measuring range, design and specic
measuring conditions. The compatibility of the wetted
parts of the process connection (thermowell, thermowell
stem) with the medium must be tested.
Non-observance can result in serious injury and/or
damage to the equipment.
Further important safety instructions can be found in the
individual chapters of these operating instructions.
2.1 Intended use
The combined bimetal thermometer is mainly used in the process
industry to monitor process temperatures.
The combined bimetal thermometer has been designed and built
solely for the intended use described here, and may only be used
accordingly.
The technical specications contained in these operating instructions
must be observed. Improper handling or operation of the combined
bimetal thermometer outside of its technical specications requires
the instrument to be taken out of service immediately and inspected
by an authorised WIKA service engineer.
The manufacturer shall not be liable for claims of any type based on
operation contrary to the intended use.
2. Safety
GB
14004105.01 05/2011 GB/D/F/E
WIKA operating instructions model 54, Twin-Temp 7
2.2 Personnel qualication
WARNING!
Risk of injury if qualication is insucient!
Improper handling can result in considerable injury and
damage to equipment.
■
The activities described in these operating instructions
may only be carried out by skilled personnel who have
the qualications described below.
■
Keep unqualied personnel away from hazardous
areas.
Skilled personnel
Skilled personnel are understood to be personnel who, based on
their technical training, knowledge of measurement and control
technology and on their experience and knowledge of country-
specic regulations, current standards and directives, are capable
of carrying out the work described and of independently recognising
potential hazards.
2.3 Special hazards
WARNING!
Residual media in dismounted instruments can result in
a risk to persons, the environment and equipment. Take
sucient precautionary measures.
WARNING!
For lled instruments, make sure that the medium
temperature is lower than 250 °C.
Reason: The sheath also contains a lling liquid; at a
temperature > 250 °C, this liquid may become cloudy or
change colour or, in some cases, may ignite.
2. Safety
GB
14004105.01 05/2011 GB/D/F/E
8 WIKA operating instructions model 54, Twin-Temp
3. Specications
Specications
Model 54, Twin-Temp
Measuring element Bimetal helix and Pt100
Nominal size 63, 80, 100, 160
Instrument version
■
Model A5x
■
Model R5x
Rear mount (axial)
Lower mount (radial)
Permissible ambient
temperature
at the housing max. +60 °C (other versions
on request)
Working pressure
■
Continuous load (1 year)
■
short term (max. 24 h)
Measuring range (DIN EN 13190)
Scale range (DIN EN 13190)
Case, ring
Stainless steel 1.4301
Stem, process connection
Stainless steel 1.4571
Ingress protection
IP 65 per EN 60529 / IEC 529
IP 66, liquid-lled
For further specications see WIKA data sheet TV 15.01 and the
order documentation.
4. Design and function
4.1 Description
This series of thermometers is designed for installation in pipes,
vessels, plant and machinery.
The „Twin-Temp“ combined bimetal thermometer oers two
measuring systems in one instrument.
A bimetal thermometer enables the visualisation of measured values
on site without power supply, while, in addition, the integrated Pt100
resistance sensor provides an electrical signal for further processing.
This design is particularly recommended for safety-critical applica-
tions and in case of limited space where the process can be opened
only at one place.
3. Specications / 4. Design and function
GB
14004105.01 05/2011 GB/D/F/E
WIKA operating instructions model 54, Twin-Temp 9
4.2 Scope of delivery
Cross-check scope of delivery with the delivery note.
5. Transport, packaging and storage
5.1 Transport
Check the instrument for any damage that may have been caused
during transportation.
Obvious damage must be reported immediately.
5.2 Packaging
Do not remove packaging until just before mounting.
Keep the packaging as it will provide optimum protection during trans-
port (e.g. change in installation site, sending for repair).
5.3 Storage
Permissible conditions at the place of storage:
Storage temperature: -20 ... +60 °C
Avoid exposure to the following factors:
■
Direct sunlight or proximity to hot objects
■
Mechanical vibration, mechanical shock (putting it down hard)
■
Soot, vapour, dust and corrosive gases
■
Potentially explosive environments, ammable atmospheres
Store the instrument in its original packaging in a location that fulls
the conditions listed above. If the original packaging is not available,
pack and store the thermometer as described below:
1. Wrap the thermometer in an antistatic plastic lm.
2. Place the thermometer, along with shock-absorbent material, in the
packaging.
3. If stored for a prolonged period of time (more than 30 days), place a
bag containing a desiccant inside the packaging.
5. Transport, packaging and storage
GB
14004105.01 05/2011 GB/D/F/E
10 WIKA operating instructions model 54, Twin-Temp
WARNING!
Before storing the instrument (following operation),
remove any residual media. This is of particular impor-
tance if the medium is hazardous to health, e.g. caustic,
toxic, carcinogenic, radioactive, etc.
The use of liquid damping is always recommended for
temperatures near the dew point (±1 °C around 0 °C).
6. Commissioning, operation
When screwing the instrument in, the force required to do this must
not be applied through the casing, but only through the spanner ats
provided for this purpose and using a suitable tool.
6. Commissioning, operation
Installation with
spanner
When using thermowells, they must be lled with a thermal contact
medium in order to reduce the heat transfer resistance between the
outer wall of the sensor and the inner wall of the thermowell. The
working temperature of the thermal compound is -40 ... +200 °C.
WARNING!
Do not ll hot thermowells. There is a risk of the oil
spraying out!
Tabla de contenidos
Idiomas:
Otros manuales de Termómetro de WIKA
WIKA
WIKA CTH6500 Manual de usuario
WIKA
WIKA 53 Series Manual de usuario
WIKA
WIKA R5502 Manual de instalación
WIKA
WIKA Intelli Therm TGT73.100 Manual de usuario
WIKA
WIKA TF-LCD Manual de usuario
WIKA
WIKA TR31-3 Manual de usuario
WIKA
WIKA TR Series Manual de usuario
WIKA
WIKA CTH 6450 Manual de usuario
WIKA
WIKA 53 Series Manual de usuario
WIKA
WIKA TC10-W Manual de usuario
WIKA
WIKA TR33 Manual de usuario
WIKA
WIKA TR33 Manual de usuario
WIKA
WIKA 53 Series Manual de usuario
WIKA
WIKA TG53 Manual de usuario
WIKA
WIKA TG58SA Instrucciones de funcionamiento
WIKA
WIKA 1/4000 Manual de usuario
WIKA
WIKA CTH 6200 Manual de usuario
WIKA
WIKA TR25 Manual de usuario
WIKA
WIKA CTH7000 Manual de usuario
WIKA
WIKA TR30 Manual de usuario
