WIKA TG53 Manual de usuario

Operating instructions

Betriebsanleitung

Mode d'emploi

Manual de instrucciones

Model TG53,

back mount (axial)

Model TG54, back mount,

adjustable stem and dial

Bimetal thermometer, process version

Models TG53, TG54

Bimetallthermometer, Prozessausführung

Typen TG53, TG54

Thermomètre bimétallique, version process

Types TG53, TG54

Termómetro bimetálico, versión para proceso

Modelos TG53, TG54

14203024.01 10/2018 EN/DE/FR/ES

WIKA operating instructions models TG53, TG54

Operating instructions models TG53, TG54

Page 3 - 24

Betriebsanleitung Typen TG53, TG54

Seite 25 - 46

Mode d‘emploi types TG53, TG54

Page 47 - 68

Manual de instrucciones modelos TG53, TG54

Página 69 - 89

WIKA®is a registered trademark in various countries.

WIKA®ist eine geschützte Marke in verschiedenen Ländern.

Prior to starting any work, read the operating instructions!

Keep for later use!

Vor Beginn aller Arbeiten Betriebsanleitung lesen!

Zum späteren Gebrauch aufbewahren!

Lire le mode d‘emploi avant de commencer toute opération !

A conserver pour une utilisation ultérieure !

¡Leer el manual de instrucciones antes de comenzar cualquier trabajo!

¡Guardar el manual para una eventual consulta!

WIKA operating instructions models TG53, TG54

14203024.01 10/2018 EN/DE/FR/ES

Contents

1. General information 4

2. Design and function 5

3. Safety 8

4. Transport, packaging and storage 12

5. Commissioning, operation 13

6. Faults 16

7. Maintenance and cleaning 18

8. Dismounting, return and disposal 20

9. Specications 22

14203024.01 10/2018 EN/DE/FR/ES

WIKA operating instructions models TG53, TG54

1. General information

■

The bimetal thermometers described in these operating instructions

have been designed and manufactured using state-of-the-art

technology. All components are subject to stringent quality and

environmental criteria during production. Our management systems

are certied to ISO 9001 and ISO 14001.

■

These operating instructions contain important information on

handling the instrument.Working safely requires that all safety

instructions and work instructions are observed.

■

Observe the relevant local accident prevention regulations and

general safety regulations for the instrument's range of use.

■

The operating instructions are part of the product and must be kept

in the immediate vicinity of the instrument and readily accessible to

skilled personnel at any time. Pass the operating instructions on to the

next operator or owner of the instrument.

■

Skilled personnel must have carefully read and understood the

operating instructions prior to beginning any work.

■

The general terms and conditions contained in the sales

documentation shall apply.

■

Subject to technical modications.

■

Further information:

- Internet address: www.wika.de / www.wika.com

- Relevant data sheet: TM 53.02 (model TG53)

TM 54.02 (model TG54)

- Application consultant: Tel.: +49 9372 132-0

Fax: +49 9372 132-406

inf[email protected]

1. General information

WIKA operating instructions models TG53, TG54

14203024.01 10/2018 EN/DE/FR/ES

2. Design and function

2.1 Overview

Case Pointer

Dial Adjustable stem and dial version

Stem Process connection

2.2 Description

The bimetal thermometers have been developed and manufactured

in accordance with the EN 13190 (model TG54) and ASME B40.200

(model TG53) standards and full the high requirements of the process

industry.

Especially in the chemical and petrochemical, oil and gas, power

engineering and shipbuilding industries, the temperature measuring

instrument manufactured from stainless steel is used successfully.



















2. Design and function

14203024.01 10/2018 EN/DE/FR/ES

WIKA operating instructions models TG53, TG54

2.3 Dimensions in mm/inch

NS Dimensions in mm/inch

Ø D Ø d b b1 1) b2F

G ½ B,

G ¾ B

½ NPT,

¾ NPT

G ½ B,

G ¾ B

½ NPT,

¾ NPT

3" 83 1/4" or 3/8" 23 45 38 38 88 84

4" 107 1/4" or 3/8" 24 45 38 39 100 95

5" 134 1/4" or 3/8" 23 45 38 38 113 109

6" 167 1/4" or 3/8" 24 45 38 39 130 125

63 70 6 or 8 24 45 38 39 81 77

80 83 6 or 8 23 45 38 38 88 84

100 107 6 or 8 24 45 38 39 100 95

160 167 6 or 8 24 45 38 39 130 125

1) With scale ranges ≥ 0 ... 300 °C the dimensions increase by 40 mm

14183333.01

14183334.01

Back mount (axial)

G thread G thread

NPT thread

Lower mount (radial)

2. Design and function

WIKA operating instructions models TG53, TG54

14203024.01 10/2018 EN/DE/FR/ES

NS Dimensions in mm/inch

Ø D Ø d b b3F

3" 83 1/4", 3/8" 23 64 67

4" 107 1/4", 3/8" 24 65 67

5" 134 1/4", 3/8" 23 64 67

6" 167 1/4", 3/8" 24 65 67

63 70 6 or 8 24 65 67

80 83 6 or 8 23 64 67

100 107 6 or 8 24 65 67

160 167 6 or 8 24 65 67

2.4 Scope of delivery

Cross-check scope of delivery with delivery note.

14183335.02

Back mount, adjustable stem and dial

2. Design and function

14203024.01 10/2018 EN/DE/FR/ES

WIKA operating instructions models TG53, TG54

3. Safety

3.1 Explanation of symbols

WARNING!

... indicates a potentially dangerous situation that can result in

serious injury or death, if not avoided.

CAUTION!

... indicates a potentially dangerous situation that can result in

light injuries or damage to property or the environment, if not

avoided.

DANGER!

... identies hazards caused by electrical power. Should the

safety instructions not be observed, there is a risk of serious

or fatal injury.

WARNING!

... indicates a potentially dangerous situation that can result in

burns, caused by hot surfaces or liquids, if not avoided.

Information

... points out useful tips, recommendations and information for

ecient and trouble-free operation.

3.2 Intended use

These bimetal thermometers serve for temperature measurement in the

chemical and petrochemical industries, oil and gas industries and also

for the energy and shipbuilding industries.

Through the high ingress protection of the thermometer (IP65) and its

liquid damping, operation under high vibration conditions is possible.

3. Safety

WIKA operating instructions models TG53, TG54

14203024.01 10/2018 EN/DE/FR/ES

In addition they full the high requirements for resistance against

aggressive media.

The instruments are not approved for use in hazardous areas!

The instruments have been designed and built solely for the intended

use described here, and may only be used accordingly.

The manufacturer shall not be liable for claims of any type based on

operation contrary to the intended use.

3.3 Improper use

WARNING!

Injuries through improper use

Improper use of the instrument can lead to hazardous

situations and injuries.

▶Refrain from unauthorised modications to the instrument.

▶Do not use the instrument within hazardous areas.

▶Do not use the instrument with abrasive or viscous media.

Any use beyond or dierent to the intended use is considered as

improper use.

Do not use this instrument in safety or emergency stop devices.

3. Safety

14203024.01 10/2018 EN/DE/FR/ES

WIKA operating instructions models TG53, TG54

3.4 Responsibility of the operator

The instrument is used in the industrial sector. The operator is therefore

responsible for legal obligations regarding safety at work.

The safety instructions within these operating instructions, as well as the

safety, accident prevention and environmental protection regulations for

the application area must be maintained.

The operator is obliged to maintain the product label in a legible

condition.

To ensure safe working on the instrument, the operating company must

ensure

■

that suitable rst-aid equipment is available and aid is provided

whenever required.

■

that the operating personnel are regularly instructed in all topics

regarding work safety, rst aid and environmental protection

and know the operating instructions and in particular, the safety

instructions contained therein.

■

that the instrument is suitable for the particular application in

accordance with its intended use.

3.5 Personnelqualication

WARNING!

Riskofinjuryshouldqualicationbeinsucient

Improper handling can result in considerable injury and

damage to equipment.

▶The activities described in these operating instructions

may only be carried out by skilled personnel who have the

qualications described below.

Skilled personnel

Skilled personnel, authorised by the operator, are understood to

be personnel who, based on their technical training, knowledge

of measurement and control technology and on their experience

3. Safety

Este manual sirve para los siguientes modelos

Tabla de contenidos

Idiomas:

Otros manuales de Termómetro de WIKA

Manuales populares de Termómetro de otras marcas

Delton

Delton 981A Manual de usuario

Baker

Baker MM2P Manual de usuario

Tarmo

Tarmo 320281 Manual de usuario

Citizen

Citizen CTD 504 Manual de usuario

TFA

TFA 14.1500 Manual de usuario

Vive

Vive DMD1010 Manual de usuario

Gotemp

Gotemp THB4002 Manual de usuario

GREISINGER

GREISINGER G 1202 Manual de usuario

Amprobe

Amprobe TMD-53W Manual de usuario

Trotec

Trotec BP10 Manual de usuario

Radiance instruments

Radiance instruments RT616 Series Manual de usuario

Eurolec

Eurolec IR151 Manual de usuario

Scaneo

Scaneo TS42B Manual de usuario

Sper scientific

Sper scientific 800043 Manual de usuario

Microlife

Microlife NC 200 Manual de instrucciones

Motorola

Motorola MBP69SN Guía de configuración

The MeatStick

The MeatStick The MeatStick Manual de usuario

Hama

Hama TH35-A Manual de usuario