WIKA 55 Series Manual de usuario
DE
EN
Operating instructions
Betriebsanleitung
Mode d'emploi
Manual de instrucciones
ES
FR
Model R5502 Model S5550
Bimetal thermometer, model 55
Bimetallthermometer, Typ 55
Thermomètre bimétallique, type 55
Termómetro bimetálico, modelo 55
2
DE
EN
ES
FR
Operating instructions model 55
Page 3 - 22
Betriebsanleitung Typ 55
Seite 23 - 42
Mode d'emploi type 55
Page 43 - 62
Manual de instrucciones modelo 55
Página 63 - 82
© 09/2010 WIKA Alexander Wiegand SE & Co. KG
All rights reserved. / Alle Rechte vorbehalten.
WIKA®is a registered trademark in various countries.
WIKA®ist eine geschützte Marke in verschiedenen Ländern.
Prior to starting any work, read the operating instructions!
Keep for later use!
Vor Beginn aller Arbeiten Betriebsanleitung lesen!
Zum späteren Gebrauch aufbewahren!
Lire le mode d‘emploi avant de commencer toute opération !
A conserver pour une utilisation ultérieure !
¡Leer el manual de instrucciones antes de comenzar cualquier trabajo!
¡Guardar el manual para una eventual consulta!
12968065.06 06/2019 EN/DE/FR/ES
WIKA operating instructions model 55
EN
12968065.06 06/2019 EN/DE/FR/ES
WIKA operating instructions model 55 3
Contents
Contents
1. General information 4
2. Design and function 5
3. Safety 6
4. Transport, packaging and storage 11
5. Commissioning, operation 13
6. Faults 16
7. Maintenance and cleaning 18
8. Dismounting, return and disposal 20
9. Specications 22
EN
12968065.06 06/2019 EN/DE/FR/ES
4WIKA operating instructions model 55
1. General information
■
The bimetal thermometer described in the operating instructions
has been designed and manufactured using state-of-the-art
technology. All components are subject to stringent quality and
environmental criteria during production. Our management
systems are certied to ISO 9001 and ISO 14001.
■
These operating instructions contain important information on
handling the bimetal thermometer. Working safely requires that all
safety instructions and work instructions are observed.
■
Observe the local accident prevention regulations and general
safety regulations, in eect for the bimetal thermometer‘s range of
use.
■
The operating instructions are part of the instrument and must
be kept in the immediate vicinity of the bimetal thermometer and
readily accessible to skilled personnel at any time.
■
Skilled personnel must have carefully read and understood the
operating instructions, prior to beginning any work.
■
The general terms and conditions, contained in the sales
documentation, shall apply.
■
Subject to technical modications.
■
Further information:
- Internet address: www.wika.de / www.wika.com
- Relevant data sheet: TM 55.01
- Application consultant: Tel.: +49 9372 132-0
Fax: +49 9372 132-406
info@wika.de
1. General information
EN
12968065.06 06/2019 EN/DE/FR/ES
WIKA operating instructions model 55 5
2. Design and function
2.1 Overview
Case Stem
Dial Adjustable stem and dial version
Pointer Process connection
2. Design and function
EN
12968065.06 06/2019 EN/DE/FR/ES
6WIKA operating instructions model 55
2.2 Description
The bimetal thermometers of this series are intended for installation in
pipelines, vessels, plant and machinery.
Sheath and case are made of stainless steel.
To allow tting to the process, dierent installation lengths and
process connections are available.
Through the high protection class of the thermometer (IP65) and its
liquid damping, operation under vibration conditions is possible.
2.3 Scope of delivery
Cross-check scope of delivery with delivery note.
3. Safety
3.1 Explanation of symbols
WARNING!
... indicates a potentially dangerous situation that can result
in serious injury or death, if not avoided.
CAUTION!
... indicates a potentially dangerous situation that can result
in light injuries or damage to property or the environment, if
not avoided.
WARNING!
... indicates a potentially dangerous situation that can result
in burns, caused by hot surfaces or liquids, if not avoided.
Information
... points out useful tips, recommendations and information
for ecient and trouble-free operation.
2. Design and function / 3. Safety
EN
12968065.06 06/2019 EN/DE/FR/ES
WIKA operating instructions model 55 7
3.2 Intended use
These bimetal thermometers are mainly used in the process industry
for monitoring the process temperature.
The bimetal thermometer has been designed and built solely for the
intended use described here, and may only be used accordingly.
The technical specications contained in these operating instructions
must be observed. Improper handling or operation of the bimetal
thermometer outside of its technical specications requires the
instrument to be taken out of service immediately and inspected by
an authorised WIKA service engineer.
The manufacturer shall not be liable for claims of any type based on
operation contrary to the intended use.
3.3 Improper use
WARNING!
Injuries through improper use
Improper use of the instrument can lead to hazardous
situations and injuries.
▶Refrain from unauthorised modications to the
instrument.
▶Do not use the instrument within hazardous areas.
▶Do not use the instrument with abrasive or viscous
media.
Any use beyond or dierent to the intended use is considered as
improper use.
Do not use this instrument in safety or emergency stop devices.
3. Safety
EN
12968065.06 06/2019 EN/DE/FR/ES
8WIKA operating instructions model 55
3.4 Responsibility of the operator
The instrument is used in the industrial sector. The operator is
therefore responsible for legal obligations regarding safety at work.
The safety instructions within these operating instructions, as well
as the safety, accident prevention and environmental protection
regulations for the application area must be maintained.
The operator is obliged to maintain the product label in a legible
condition.
To ensure safe working on the instrument, the operating company
must ensure
■
that suitable rst-aid equipment is available and aid is provided
whenever required.
■
that the operating personnel are regularly instructed in all topics
regarding work safety, rst aid and environmental protection
and know the operating instructions and in particular, the safety
instructions contained therein.
■
that the instrument is suitable for the particular application in
accordance with its intended use.
3.5 Personnelqualication
WARNING!
Riskofinjuryshouldqualicationbeinsucient
Improper handling can result in considerable injury and
damage to equipment.
▶The activities described in these operating instructions
may only be carried out by skilled personnel who have
the qualications described below.
▶Keep unqualied personnel away from hazardous areas.
3. Safety
EN
12968065.06 06/2019 EN/DE/FR/ES
WIKA operating instructions model 55 9
Skilled personnel
Skilled personnel are understood to be personnel who, based on
their technical training, knowledge of measurement and control
technology and on their experience and knowledge of country-
specic regulations, current standards and directives, are capable
of carrying out the work described and independently recognising
potential hazards.
Special operating conditions require further appropriate knowledge,
e.g. of aggressive media.
3.6 Personal protective equipment
The personal protective equipment is designed to protect the skilled
personnel from hazards that could impair their safety or health during
work.When carrying out the various tasks on and with the instrument,
the skilled personnel must wear personal protective equipment.
Follow the instructions displayed in the work area regarding personal
protective equipment!
The requisite personal protective equipment must be provided by the
operating company.
Wear safety goggles!
Protect eyes from ying particles and liquid splashes.
Wear protective gloves!
Protect hands from friction, abrasion, cuts or deep injuries
and also from contact with hot surfaces and aggressive
media.
3. Safety
EN
12968065.06 06/2019 EN/DE/FR/ES
10 WIKA operating instructions model 55
3.7 Labelling, safety marks
Product label (example)
Model
Year of manufacture
Serial number
Before mounting and commissioning the instrument,
ensure you read the operating instructions!
Do not ll the instruments with lling liquid subsequently.
Thermometer
Model
TG53 + option ATEX
14001455
year 2016
WIKA Alexander Wiegand SE & Co. KG
63911 Klingenberg / Germany
WIKA Alexander Wiegand SE & Co. KG
Thermometer
63911 Klingenberg / Germany
year “Jahr”
“Artikelnr.”
Model
“Model” + option ATEX
3. Safety
Otros manuales para 55 Series
1
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Idiomas:
Otros manuales de Termómetro de WIKA
WIKA
WIKA CTH6300 Manual de usuario
WIKA
WIKA TG53 Manual de usuario
WIKA
WIKA 70 Manual de usuario
WIKA
WIKA Twin-Temp 54 Manual de usuario
WIKA
WIKA 53 Series Manual de usuario
WIKA
WIKA CTH6500 Manual de usuario
WIKA
WIKA TR57-M Manual de usuario
WIKA
WIKA TF45 Manual de usuario
WIKA
WIKA CTR3000 Manual de usuario
WIKA
WIKA CTH 6450 Manual de usuario
WIKA
WIKA TG58SA Manual de usuario
WIKA
WIKA TR33 Manual de usuario
WIKA
WIKA CTH63I0 Manual de usuario
WIKA
WIKA 53 Series Manual de usuario
WIKA
WIKA TR25 (Ex i) Manual de usuario
WIKA
WIKA 1/4000 Manual de usuario
WIKA
WIKA TG58SA Instrucciones de funcionamiento
WIKA
WIKA R5502 Manual de instalación
WIKA
WIKA TR Manual de usuario
WIKA
WIKA F73.100 Manual de usuario
