Weider 9900i Manual de usuario

CAUT ON

Read all precautions and instruc-

tions in this manual before using

this equipment. Keep this manual

for future reference.

Model No. WEEVSY49810.0

Serial No.

Write the serial number in the

space above for reference.

Serial Number

Decal

USERʼS MANUAL

www.iconeurope.com

QUEST ONS?

If you have questions, or if there are

missing parts, please contact us:

Call: 08457 089 009

From reland: 053 92 36102

Website: www.iconsupport.eu

E-mail: [email protected]

Write:

CON Health & Fitness, Ltd.

c/o H Group PLC

Express Way

Whitwood, West Yorkshire

WF10 5QJ

AUSTRAL A

Call: 1-800-237-173

E-mail:

[email protected]

WARN NG DECAL PLACEMENT

TABLE OF CONTENTS

WARNINGDECA P ACEMENT ..............................................................2

IMPORTANTPRECAUTIONS ................................................................3

BEFOREYOUBEGIN ......................................................................4

PARTIDENTIFICATIONCHART ..............................................................5

ASSEMB Y ...............................................................................7

ADJUSTMENT ...........................................................................34

WEIGHTRESISTANCECHART..............................................................37

CAB EDIAGRAM.........................................................................38

MAINTENANCE ..........................................................................39

EXERCISEGUIDE INES ...................................................................40

PART IST ..............................................................................43

EXP ODEDDRAWING ....................................................................45

ORDERINGREP ACEMENTPARTS ..................................................BackCover

This drawing shows the location(s)

of the warning decal(s). f a decal

is missing or illegible, see the

front cover of this manual and

request a free replacement

decal. Apply the decal in the

location shown. Note: The

decal(s) may not be shown at

actual size.

WEIDER is a registered trademark of ICON IP, Inc.

MPORTANT PRECAUT ONS

1. Before beginning any exercise program,

consult your physician. This is especially

important for persons over age 35 or per-

sons with pre-existing health problems.

2. Use the weight system only as described in

this manual.

3. t is the responsibility of the owner to ensure

that all users of the weight system are ade-

quately informed of all precautions.

4. The weight system is intended for home use

only. Do not use the weight system in a com-

mercial, rental, or institutional setting.

5. Keep the weight system indoors, away from

moisture and dust. Do not put the weight

system in a garage or covered patio, or near

water.

6. Place the weight system on a level surface,

with a mat beneath it to protect the floor or

carpet. Make sure that there is enough clear-

ance around the weight system to mount,

dismount, and use the weight system.

7. nspect and properly tighten all parts regu-

larly. Replace any worn parts immediately.

8. Keep children under age 12 and pets away

from the weight system at all times.

9. The weight system should not be used by

persons weighing more than 300 lbs.

(136 kg).

10. Wear appropriate exercise clothes while

exercising; do not wear loose clothes that

could become caught on the weight system.

Always wear athletic shoes for foot protec-

tion.

11. Keep hands and feet away from moving

parts.

12. Always secure the weight stack with the lock

pin and the lock after exercising to prevent

unauthorized use of the weight system (see

LOCK NG THE WE GHT STACK on page 36).

13. Make sure that the cables remain on the pul-

leys at all times. f the cables bind while you

are exercising, stop immediately and make

sure that the cables are on the pulleys.

14. Always stand on the foot plate when per-

forming an exercise that could cause the

weight system to tip.

15. Never release the arms, leg lever, lat bar,

handle, ankle strap, or double strap while

weights are raised. The weights will fall with

great force.

16. Always disconnect the lat bar from the

weight system when performing an exercise

that does not require the lat bar.

17. Over exercising may result in serious injury

or death. f you feel faint or if you experience

pain while exercising, stop immediately and

cool down.

WARN NG: To reduce the risk of serious injury, read all important precautions and

instructions in this manual and all warnings on your weight system before using your weight sys-

tem. CON assumes no responsibility for personal injury or property damage sustained by or

through the use of this product.

Assembled Dimensions:

Height: 6 ft. 11 in. (211 cm)

Width: 4 ft. 1 in. (124 cm)

Depth: 7 ft. 1 in. (216 cm)

Shroud

High Pulley Station

ow Pulley Station

Ankle Strap

Double Strap

Right Side

Left Side

Backrest

Ab Station

at Bar

Weight

Weight Pin

eg ever

Cable Clip

Chain

Foot Plate

Seat

Butterfly Arm

Burn Band

BEFORE YOU BEG N

Thank you for selecting the versatile WEIDER®9900 I

weight system. The weight system offers a selection of

weight stations designed to develop every major mus-

cle group of the body. Whether your goal is to tone

your body, build dramatic muscle size and strength, or

improve your cardiovascular system, the weight sys-

tem will help you to achieve the specific results you

want.

For your benefit, read this manual carefully before

using the weight system. If you have questions after

reading this manual, please see the front cover of this

manual. To help us assist you, note the product model

number and serial number before contacting us. The

model number and the location of the serial number

decal are shown on the front cover of this manual.

Before reading further, please review the drawing

below and familiarize yourself with the parts that are

labeled.

Press Handle

Handle

Note: The terms “right side” and “left side” are used relative to a person sitting on the seat; they

do not correspond to right and left on the drawings in this manual.

M10 Locknut (74)

M10 Washer (88)

12.7mm

Spacer (73)

M10 Curved

Washer (86)

14.8mm

Spacer (95)

6.35mm

Spacer (94)

M10 Jam Nut (99)M6 Locknut (87)

ST4.2 x 19mm

Screw (90)

M4 Locknut

(108)

PART DENT F CAT ON CHART

Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw-

ing is the key number of the part, from the PART IST near the end of this manual. MPORTANT: f you cannot

find a part in the hardware kit, check to see if it has been preassembled. To avoid damaging parts, do

not use power tools for assembly.

Continued on page 6

M10 x 95mm Bolt (78)

M10 x 68mm Bolt (66)

M10 x 57mm Bolt Set (80)

M10 x 93mm Bolt (63)

M10 x 45mm Bolt (98)

M10 x 97mm Bolt (100)

M10 x 125mm Bolt (83)

M10 x 130mm Bolt (11)

M10 x 65mm Bolt (75)

M10 x 47mm

Bolt (91)

M10 x 55mm

Bolt (79)

M10 x 57mm

Bolt (93)

M10 x 63mm Bolt (89)

M10 x 43mm Bolt (65)

M10 x 40mm Bolt (97)

M10 x 117mm Bolt (64)

M6 x 45mm Bolt (85)

M10 x 20mm

Screw (84)

M6 x 16mm

Screw (62)

M10 x 50mm

Button Bolt (76) M8 x 65mm Button Screw (82)

M4 x 12mm

Bolt (107)

ASSEMBLY

To make assembly easier, carefully read the

following information and instructions:

• Assembly requires two persons.

• Because of its weight and size, assemble the

weight system in the location where it will be

used. Make sure that there is enough clearance

to walk around the weight system.

• Place all parts in a cleared area and remove the

packing materials. Do not dispose of the packing

materials until assembly is completed.

• For help identifying small parts, use the PART

IDENTIFICATION CHART on pages 5 and 6.

• The following tools (not included) may be required

for assembly:

two adjustable wrenches

one rubber mallet

one standard screwdriver

one Phillips screwdriver

Assembly may be more convenient if you have a

socket set, a set of open-end or closed-end

wrenches, or a set of ratchet wrenches.

Orient the Base (1) and the Side Stabilizers (2)

as shown.

Attach the Side Stabilizers (2) to the Base (1)

with two M10 x 95mm Bolts (78) and two M10

ocknuts (74). Do not fully tighten the

Locknuts yet.

Warning

Decal

To make assembly easier, read the

assembly tips in the box above.

2. Orient the U-stabilizer (3) and the Foot Plate (4)

as shown. Make sure that the textured side of

the Foot Plate is facing upward.

Attach the Foot Plate (4) to the U-stabilizer (3)

with two M8 x 65mm Button Screws (82). Do

not overtighten the Screws; the Foot Plate

must pivot easily.

3. Attach the U-stabilizer (3) to the Base (1) with

two M10 x 68mm Bolts (66), two M10 Washers

(88), and two M10 ocknuts (74).

4. Orient the Upright (5) as shown.

Attach the Upright (5) to the Base (1) and the

Side Stabilizers (2) with four M10 x 55mm Bolts

(79), four M10 Washers (88), and four M10

ocknuts (74). Do not fully tighten the

Locknuts yet.

79 79

5. Orient the eg (10) as shown.

Attach the eg (10) to the Base (1) with two

M10 x 55mm Bolts (79), two M10 Washers (88),

and two M10 ocknuts (74). Do not fully

tighten the Locknuts yet.

6. Orient the Seat Tube (8) as shown.

Attach the eg (10) to the Seat Tube (8) with

two M10 x 68mm Bolts (66), two M10 Washers

(88), and two M10 ocknuts (74). Do not fully

tighten the Locknuts yet.

Attach the Seat Tube (8) to the Upright (5) with

two M10 x 93mm Bolts (63), two M10 Washers

(88), and two M10 ocknuts (74). Do not fully

tighten the Locknuts yet.

See steps 1, 4, 5, and 6. Tighten the M10

ocknuts (74).

7. Apply some of the included grease to an M10 x

57mm Bolt Set (80).

Orient the eg ever (13) so that the high end of

the bracket is in the location shown.

Attach the eg ever (13) to the eg (10) with

the M10 x 57mm Bolt Set (80). Make sure that

the barrel of the Bolt Set is inserted through

both sides of the bracket on the Leg.

780

Grease

High

End

8. See the CABLE D AGRAM on page 38 to

identify the cables as you assemble them.

dentify the Burn Cable (45).

dentify the four Burn Pulleys (68), the three

V-pulleys (not shown), and the twenty

Pulleys (not shown).

Route the threaded end of the Burn Cable (45)

through the bracket on the Base (1) as shown.

Attach a Burn Pulley (68) over the Burn Cable

(45) inside the bracket on the Base (1) with an

M10 x 63mm Bolt (89), two 12.7mm Spacers

(73), and an M10 ocknut (74).

Threaded

End

9. Attach a second Burn Pulley (68) over the Burn

Cable (45) inside the bracket on the Base (1)

with an M10 x 63mm Bolt (89), two 12.7mm

Spacers (73), and an M10 ocknut (74).

Otros manuales para 9900i

Este manual sirve para los siguientes modelos

Otros manuales de Gimnasio en casa de Weider

Weider

Weider Easy Compact 90 Guía de inicio rápido

Weider

Weider Pro 290 wc bench Guía de inicio rápido

Weider

Weider 195 Tc Bench Manual de usuario

Weider

Weider WEBE12910 Manual de usuario

Weider

Weider WESY59100 Manual de usuario

Weider

Weider 831.150380 Manual de usuario

Weider

Weider ADVANTAGE 831.153962 Manual de usuario

Weider

Weider C101predator Manual de usuario

Weider

Weider WESY5983.5 Manual de usuario

Weider

Weider PRO 900 Manual de usuario

Weider

Weider 8512 Manual de usuario

Weider

Weider Pro 340 L Bench Manual de usuario

Weider

Weider D630 Manual de usuario

Weider

Weider 8970 Guía de inicio rápido

Weider

Weider PRO 900 Manual de usuario

Weider

Weider PRO 9400 Manual de usuario

Weider

Weider PRO 800 831.150741 Manual de usuario

Weider

Weider Victory SM12 Manual de usuario

Weider

Weider PRO 408 Manual de usuario

Weider

Weider Power Guide X1s Manual de usuario

Weider

Weider 4990 I Manual del sistema

Weider

Weider Pro 125 Bench Manual de operación y mantenimiento

Weider

Weider Muscle 1382 Manual de usuario

Weider

Weider MEDALLION M-305 Manual de usuario

Manuales populares de Gimnasio en casa de otras marcas

Horizon Fitness

Horizon Fitness OXFORD 6 Manual de usuario

Energetics

Energetics Multi Trainer 5.1 Manual de usuario

Matrix

Matrix MG-PL Series Manual de usuario

Reebok

Reebok Tbr2i Manual de operación y mantenimiento

Pure Fitness

Pure Fitness 8526HE Manual de usuario

Bowflex

Bowflex Sport 001-6961 Manual de usuario

NordicTrack

NordicTrack E8200 Competition Bench Guía de inicio rápido

Body Solid

Body Solid GHYP-345 Manual de usuario

Evo

Evo TAHOE 5105 Manual de usuario

cardiobull

cardiobull RA17 Manual de usuario

ParaBody

ParaBody 40 Manual de usuario

JLL

JLL Ventus Pro Air Power Manual de usuario

Trojan

Trojan Colorado 370 Manual de usuario

Octane Fitness

Octane Fitness xRide xR650 Manual de usuario

Precor

Precor Discovery Series Manual de usuario

Insportline

Insportline RW600 Manual de usuario

Stamina

Stamina 55-1532 Manual de usuario

Tunturi

Tunturi R25 Manual de usuario