Volt VAL-2002 Manual de usuario

VOLT®Low Voltage Landscape Lighting

VOLT®G2 Fat Boy Spotlight

VAL-2002

INSTALLATION INSTRUCTIONS

Specications and product details subject to change without notice.

[email protected] • 813.978.3700

Help Hotline:

1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)

- 1 -

Package Contents

Product Dimensions

Important: Please Read Before Installation

INSTALLATION INSTRUCTIONS

This luminaire is intended for installation in accordance with local codes

and the National Electric Code (NEC). Failure to adhere to these codes and

instructions may result in serious injury, property damage and void the

warranty.

These instructions do not intend to cover all variations in installation,

operation maintenance or mounting situations.

1. Make sure the power is turned OFF before installing or servicing this

luminaire.

2. WARNING: risk of electrical shock. Install all luminaires 10 feet (3.05M)

or more from pool, spa or fountain.

3. This luminaire is intended to be used only with a power supply

(transformer) rated maximum of 300 watts (25 AMPS) at 15 volts.

4. Wiring connections must be made with wire connectors that are suitable

for outdoor use.

5. Position the low voltage wire and wire connector so that it is located

within 6 inches (15.2 cm) from a building structure, a luminaire or

tting.

6. The main low voltage cable is intended for shallow burial - less than 6

inches (152 mm).

7. If additional lengths of low voltage cable are required, please contact

www.voltlighting.com or call 1-813-978-3700.

A. (1) Fixture Body

www.voltlighting.com [email protected] • 813.978.3700

Important Safety Instructions

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS

Lighted lamp is HOT!

WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.

1. Turn o/unplug and allow to cool before replacing lamp.

2. Lamp gets HOT quickly! Contact only switch/plug when turning on.

3. Do not touch the hot lens, guard or enclosure.

4. Keep lamp away from materials that may burn.

5. Do not touch lamp at any time. Use a soft cloth. Oil from skin may

damage lamp.

6. Do not operate the luminaire tting with a missing or damaged shield.

SAVE THESE INSTRUCTIONS

- 2 - - 3 -

3.11”

2.72”

2.9”

1.4”

7”

VOLT®G2 Fat Boy Spotlight

VAL-2002

Install Stake

Determine the desired location

for mounting the stake mount.

Hammer the stake into the

ground until ange of stake

is ush to grade. To avoid

damage to the stake, place a

board on top of the stake while

hammering.

Note: If the ground is hard and

the stake is dicult to install,

make a crosscut in the ground

using a at shovel.

Board

Ground

Soil

Stake

INSTALLATION INSTRUCTIONS

www.voltlighting.com [email protected] • 813.978.3700

- 4 - - 5 -

Install Fixture to Stake

Clear away an area in the

ground at the wireway slot on

top of the stake. Lay the supply

wires into the wireway slot and

attach the xture on to the

stake. Tighten until snug.

Fixture Body

Ground

Supply Wires

Wireway Slot

Soil

Stake

Wire Connection

Strip both leads from the luminaire pigtail. Using two wire connectors

(sold separately), connect the leads from the luminaire to the main

supply cable leads.

Pigtail

Main Supply

Cable

Wire Connectors

Remove the Lens

Unlock the set screw and remove

the lens from the xture.

Fixture

Lens

Set Screw

Install MR16 Bulb

Insert MR16 bulb with the

correct wattage and type

marked on the xture label

and secure into place.

CAUTION: Do not exceed

maximum wattage marked on

luminaire label.

Fixture

MR16 Bulb

Socket

VOLT®G2 Fat Boy Spotlight

VAL-2002

INSTALLATION INSTRUCTIONS

www.voltlighting.com

- 6 -

[email protected] • 813.978.3700

- 7 -

ROTAT E

Install Lens

Place the lens back onto the

xture. Align holes on both of

them and secure with previously

removed set screw. Hand tighten

until snug.

Adjust Luminaire Direction

Loosen the adjustment screw

at the joint and adjust the

luminaire to the desired

direction. Once the desired

direction is achieved, tighten

the adjustment screw.

ROTAT E

Luminaire

Adjustment Screw

Remove the glare guard and the lens to expose the MR16 lamp and replace it

with the correct wattage and type marked on the xture label. Then,

reinstall the lens and the glare guard.

IMPORTANT: MR16 lamp must be protected from moisture and dust at all

times. Always reinstall the lens and the glare guard when removed.

Install/Replace Lamp

Fixture

Set Screw

Lens

VOLT®G2 Fat Boy Spotlight

VAL-2002

- 8 -

Specications and product details subject to change without notice.

[email protected] • 813.978.3700

www.voltlighting.com

IS-VAL-2002-ver2.pdf

Help Hotline:

1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)

Este manual sirve para los siguientes modelos

Otros manuales de Iluminación de paisajes de Volt

Volt

Volt VHS-605-4-FPG Manual de usuario

Volt

Volt VWL-510 Series Manual de usuario

Volt

Volt VFL-4007-4-BBZ Manual de usuario

Volt

Volt VPL-1042-4-BBZ Manual de usuario

Volt

Volt VHS-6719-25-BBZ Manual de usuario

Volt

Volt 130 Series Instrucciones de funcionamiento y seguridad

Volt

Volt VWL-7125-BBZ Manual de usuario

Volt

Volt 3601 Series Manual de usuario

Volt

Volt VHS-6719-BBZ Manual de usuario

Volt

Volt 510 Series Manual de usuario

Volt

Volt Sedona VHT-306-11-BBZ Manual de usuario

Volt

Volt VPL-1041-4-BBZ Manual de usuario

Volt

Volt VWL-55 Series Instrucciones de funcionamiento y seguridad

Volt

Volt VHS-6720-X-BBZ Manual de usuario

Volt

Volt All-Star VAL-2000 Series Manual de usuario

Volt

Volt VHS-6720-X-BBZ-R1 Manual de usuario

Volt

Volt VHS-650-4-BBK Manual de usuario

Volt

Volt Atom Mini VAL-2009-4-BBZ Manual de usuario

Volt

Volt VAL-1811-40-BBZ Manual de usuario

Volt

Volt VPL-1044-4-BBZ Manual de usuario

Volt

Volt ShadowMaster VPL-1039 Series Manual de usuario

Volt

Volt VAL-180 Manual de usuario

Volt

Volt VFL-430-4-BBK Manual de usuario

Volt

Volt VFL-4601-BBZ Manual de usuario

Manuales populares de Iluminación de paisajes de otras marcas

Intex

Intex SL1006 Manual de usuario

LED Group

LED Group ROBUS R2IN13W Manual de usuario

Patriot Lighting

Patriot Lighting 343-1484 Manual de usuario

Hess

Hess SERA G: SERA S Manual de usuario

LIGMAN

LIGMAN JET 44 Manual de usuario

LIGMAN

LIGMAN MALTA 1 Manual de usuario

Cooper Lighting

Cooper Lighting MCGRAW-EDISON WBG Manual de usuario

Cooper Lighting

Cooper Lighting Invue 42 - 175W Manual de usuario

Saxby Lighting

Saxby Lighting Islay 68784 Manual

LIGMAN

LIGMAN EU-10016-3 Manual de usuario

Cooper Lighting

Cooper Lighting McGraw-Edison ZD Credenza Manual de usuario

LIGMAN

LIGMAN KI-60475 Manual de usuario

Cooper Lighting

Cooper Lighting Generation CLB25MWW5C373 Manual de usuario

Malibu Boats

Malibu Boats CL905K Manual de usuario

LIGMAN

LIGMAN NYB-30161 Manual de usuario

LIGMAN

LIGMAN SI-80021 Manual de usuario

Malibu Boats

Malibu Boats CM110P Manual de usuario

U.S.T.E.

U.S.T.E. VISTA 8202 Manual de usuario