Volt VAL-1810-40-BBZ Manual de usuario

VOLT®Low Voltage Landscape Lighting

VOLT® Top Dog Downlight Cast Brass

VAL-1810-40-BBZ

INSTALLATION INSTRUCTIONS

Specications and product details subject to change without notice.

[email protected] • 813.978.3700

Help Hotline:

1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)

VOLT®Top Dog Downlight Cast Brass

VAL-1810-40-BBZ

Package Contents

Parts Required (sold separately)

Product Dimensions

Important: Please Read Before Installation

Important Safety Instructions

INSTALLATION INSTRUCTIONS

This luminaire is intended for installation in accordance with local codes

and the National Electric Code (NEC). Failure to adhere to these codes and

instructions may result in serious injury, property damage and void the

warranty.

These instructions do not intend to cover all variations in installation,

operation maintenance or mounting situations.

1. Make sure that the power is turned OFF before installing or servicing this

luminaire.

2. WARNING: risk of electrical shock. Install all luminaires 10 feet (3.05M) or

more from pool, spa or fountain.

3. This luminaire is intended to be used only with a power supply

(transformer) rated maximum of 300 watts (25 AMPS) at 15 volts.

4. Wiring connections must be made with wire connectors that are suitable

for outdoor use.

5. Position the low voltage wire and wire connector so that it is located

within 6 inches (15.2 cm) from a building structure, a luminaire or tting.

6. The main low voltage cable is intended for shallow burial - less than 6

inches (152 mm).

7. If additional lengths of low voltage cable are required, please contact

www.voltlighting.com or call 1-813-978-3700.

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS

Lighted lamp is HOT!

WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.

1. Turn o/unplug and allow to cool before replacing lamp.

2. Lamp gets HOT quickly! Contact only switch/plug when turning on.

3. Do not touch the hot lens, guard or enclosure.

4. Keep lamp away from materials that may burn.

5. Do not touch lamp at any time. Use a soft cloth. Oil from skin may

damage lamp.

6. Do not operate the luminaire tting with a missing or damaged shield.

SAVE THESE INSTRUCTIONS

A. (1) Fixture

A. (1) MR16 Lamp

www.voltlighting.com [email protected] • 813.978.3700

B. Oset kit with self-tapping screws

Remove Shield and Glare Guard

Glare Guard

Shield

Screw

Fixture

Use a screwdriver to unlock the

screw and remove the glare guard

from the shield. Then, remove the

shield from the xture.

5.8”

2.3”

2.5”

INSTALLATION INSTRUCTIONS

www.voltlighting.com [email protected] • 813.978.3700

VOLT®Top Dog Downlight Cast Brass

VAL-1810-40-BBZ

Install Lamp

Install Shield and Glare Guard

Lamp

Screw

Socket

Shield

Glare Guard

Fixture

Wire Connections

Lay out the supply cable to the transformer. Strip both leads from the

luminaire pigtail. Connect the leads from the luminaire supply cable to

the transformer (sold separately).

Install Fixture

Determine the desired location

for the xture. Pass self-tapping

screws through holes on the

surface mount. Thread the self-

tapping screws into the surface to

secure the xture.

NOTE: For applications involving

installation in trees, use the

mounting kit with osets. These

will allow for tree growth.

Fixture

Self-tapping Screws

Offsets (included

with mounting kit)

Insert the lamp with the correct

wattage and type marked on the

xture label.

CAUTION: Do not exceed maximum

wattage marked on luminaire label.

NOTE: DO NOT touch lamp with

bare hands. Use soft cloth to handle

lamp.

Replace the shield over the lamp

and thread it onto the xture.

Tighten until snug. Attach the

glare guard back onto the shield

and secure it with the provided

screw. Tighten until snug with a

screwdriver.

Fixture

Pigtail

Transformer

(sold separately)

Supply Cable

Adjust Angle of Lamp

Install/Replace Lamp

Unscrew the screw on the glare guard. Then remove the glare guard

and shield to expose the lamp. Replace the lamp with the correct

wattage and type marked on the xture label. Then, reinstall the

shield and glare guard and tighten with the included screw.

IMPORTANT: Halogen lamps must be protected from moisture and dust

at all times. Always reinstall shields and glare guards when moved.

Adjustment

Screw

Loosen the adjustment screw and

adjust lamps to your desired angles

and then tighten the adjustment

screw.

is-181-ver4.N.pdf

Specications and product details subject to change without notice.

[email protected] • 813.978.3700

www.voltlighting.com

Help Hotline:

1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)

Tabla de contenidos

Otros manuales de Iluminación de paisajes de Volt

Volt

Volt 130 Series Instrucciones de funcionamiento y seguridad

Volt

Volt VPL-1024 Manual de usuario

Volt

Volt VAL-1811-40-BBZ Manual de usuario

Volt

Volt 310 Series Manual de usuario

Volt

Volt VFL-4601-BBZ Manual de usuario

Volt

Volt VSSI-2005-50-BK Manual de usuario

Volt

Volt STK-17LI Series Manual de usuario

Volt

Volt LPL-PLKIT Manual de usuario

Volt

Volt VWL-705-BBZ Manual de usuario

Volt

Volt VUL-6703 BBZ Series Manual de usuario

Volt

Volt VAC-STK-PWR-PGR Manual de usuario

Volt

Volt VPL-3024-BBZ Manual de usuario

Volt

Volt VPL-1012-BBZ Manual de usuario

Volt

Volt All-Star Brass Tommy Light Manual de usuario

Volt

Volt Big Par36 Brass Black Flood Manual de usuario

Volt

Volt VDL-6000 Manual de usuario

Volt

Volt VPL-1001-4-BBZ Manual de usuario

Volt

Volt VAL-91 Series Instrucciones de funcionamiento y seguridad

Volt

Volt VSM-2408-0-BBZ Manual de usuario

Volt

Volt VFL-120V Series Manual de usuario

Volt

Volt VHS-67 Series Manual de usuario

Volt

Volt VUL-6802-25-BBZ Manual de usuario

Volt

Volt VAL-2044-L-ABK Manual de usuario

Volt

Volt VWL-703-BBZ Manual de usuario

Manuales populares de Iluminación de paisajes de otras marcas

Intex

Intex SL1006 Manual de usuario

LED Group

LED Group ROBUS R2IN13W Manual de usuario

Patriot Lighting

Patriot Lighting 343-1484 Manual de usuario

Hess

Hess SERA G: SERA S Manual de usuario

LIGMAN

LIGMAN JET 44 Manual de usuario

LIGMAN

LIGMAN MALTA 1 Manual de usuario

Cooper Lighting

Cooper Lighting MCGRAW-EDISON WBG Manual de usuario

Cooper Lighting

Cooper Lighting Invue 42 - 175W Manual de usuario

Saxby Lighting

Saxby Lighting Islay 68784 Manual

LIGMAN

LIGMAN EU-10016-3 Manual de usuario

Cooper Lighting

Cooper Lighting McGraw-Edison ZD Credenza Manual de usuario

LIGMAN

LIGMAN KI-60475 Manual de usuario

Cooper Lighting

Cooper Lighting Generation CLB25MWW5C373 Manual de usuario

Malibu Boats

Malibu Boats CL905K Manual de usuario

LIGMAN

LIGMAN NYB-30161 Manual de usuario

LIGMAN

LIGMAN SI-80021 Manual de usuario

Malibu Boats

Malibu Boats CM110P Manual de usuario

U.S.T.E.

U.S.T.E. VISTA 8202 Manual de usuario