Vivo STAND-V103W Manual de usuario

White Triple Monitor Desk Mount

Scan the QR code with your mobile device or follow the link

for helpful videos and specications related to this product.

Instruction Manual

https://vivo-us.com/products/stand-v103

SKU: STAND-V103W

[email protected]om www.vivo-us.com 309-278-5303

Chat live with an agent!

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

PACKAGE CONTENTS

WARNING!

If you do not understand these directions, or if you have any doubts about the safety of the installation,

please call a qualied technician. Check carefully to make sure there are no missing or defective parts.

Improper installation may cause damage or serious injury. Do not use this product for any purpose that is

not explicitly specied in this manual. Do not exceed weight capacity. We cannot be liable for damage or

injury caused by improper mounting, incorrect assembly or inappropriate use.

TIPOVER WARNING

SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:

• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR STAND.

• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL

USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.

WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

A (x1)

Pole

B(x1)

Lower Clamp

C(x1)

Upper Clamp

D(x1)

Pole Cover

E(x1)

Arm

G (x4)

Joint Cover

H(x4)

Plastic Spacer

S-B (x2)

M10x15mm

Screw

S-D (x2)

M8x10mm

Screw

S-F (x1)

M10 Bolt

I (x1)

Support Plate

S-E (x1)

M10 Washer

S-G (x1)

Lock Washer

L (x1)

Grommet Pad

M-A (x12)

M4x12mm

Thumbscrew

M-B (x12)

M4x30mm

Screw

M-C (x12)

M4 Spacer

N (x2)

Spare Cap

T-D (x1)

Wrench

K (x2)

Side VESA Plate

J (x1)

Center VESA Plate

S-I (x2)

Cap Nut

S-H (x1)

M4x6mm

Screw

M (x4)

Cable Clip

F(x2)

Arm Extension

S-C (x2)

M10x47mm

Screw

S-A (x3)

M6x8mm

Screw

T-A (x1)

3mm Allen

Wrench

T-B (x1)

5mm Allen

Wrench

T-C (x1)

6mm Allen

Wrench

NOTE: SOME HARDWARE MAY NOT BE USED

ASSEMBLY STEPS

STEP 1

OPTION A: Clamp Installation

Install Upper Clamp (C) to Pole (A) using M6x8mm Screws (S-A) and a Phillips

screwdriver. Assemble Lower Clamp (B) to Upper Clamp (C) using M10x15mm

Screws (S-B) and 5mm Allen Wrench (T-B). Secure the clamp assembly to the

desktop be tightening to the hand bolts on Lower Clamp (C). Install the Pole Cover

(D) to Pole (A).

TOOLS NEEDED

Phillips

Screwdriver

OPTION B: Existing Grommet Base Installation

Remove adhesive backing from Grommet Pad (L) and place on the bottom of Pole

(A). Install Pole (A) to existing grommet hole using Support Plate (I) with M10 Bolt

(S-F), M10 Washer (S-E) and Lock Washer (S-G). Tighten

with Wrench (T-D). Install the Pole Cover (D) to Pole (A).

Drill

22 lbs

Per Arm

(10 kg)

DO NOT EXCEED WEIGHT CAPACITY.

Failure to do so may result in serious injury.

S-A

S-B

T-B

S-E

S-G

T-D

S-F

STEP 1 (Continued)

STEP 2

Align Arm Extensions (F) with Arm (E) so that the holes for the wire clips are

facing down. Place Plastic Spacers (H) on top and bottom of Arm Extensions (F).

Assemble Arm Extensions (F) to Arm (E) with M10x47mm Screws (S-C) and tighten

using 6mm Allen Wrench (T-C). Press Joint Covers (G) into place.

OPTION C: Self-Drilled Grommet Base Installation

Drill a 3/8” (10mm) diameter hole through the mounting surface Remove adhesive

backing from Grommet Pad (L) and place on the bottom of Pole (A). Install Pole (A)

to existing grommet hole using Support Plate (I) with M10 Bolt (S-F), M10 Washer

(S-E) and Lock Washer (S-G). Tighten with Wrench (T-D). Install the Pole Cover (D)

to Pole (A).

S-E

S-G

T-D

S-F

S-C

T-C

STEP 3

Assemble Arm (E) to Pole (A) using M8x10mm Screws (S-D) and 5mm Allen

Wrench (T-B).

STEP 4

OPTION A: Flat Back Monitor

Secure Side VESA Plates (K) to monitors

using M4x12mm Thumbscrews (M-A).

OPTION B: Curved Back Monitor

Secure Side VESA Plates (K) to monitors

using M4x30mm Screws (M-B) and M4

Spacers (M-C).

Secure Center VESA Plate (J) to monitors

using M4x12mm Thumbscrews (M-A).

Secure Center VESA Plate (J) to monitors

using M4x30mm Screws (M-B) and M4

Spacers (M-C).

S-D

T-B

M-A

M-B

M-C

STEP 6

Remove the plastic covers on Arm

Extensions (F) and adjust the tilt using

Wrench (T-D).

Adjust the Tilt and rotation of the center

monitor by loosening the set screw on

Arm (E) using 3mm Allren Wrench (T-A).

Retighten the set screw.

Assemble side VESA Plates (K) with

monitors to Arm Extensions (F). Secure

using Cap Nuts (S-I).

STEP 5

Assemble Center VESA Plate (J) with

monitor to Arm (E). Secure using

M4x6mm Screw (S-H).

S-I

S-H

T-D

T-A

STEP 7

Adjust the Height of Center Monitor:

Using 6mm Allen Wrench (T-C), turn the

bolt on Arm (E) counterclockwise to

lower the center monitor, turn the bolt

clockwise to raise the center monitor.

Adjust the Height of Side Monitors:

Remove Cap Nut (S-I) from Arm Exten-

sions (F). Turn the screw using counter-

clockwise using 3mm Allen Wrench (T-A)

to raise the monitor, and clockwise to

lower it.

STEP 9

Insert Cable Clips (M) into the undersides of Arm (E) and Arm Extensions (F).

Route cables through Cable Clips (M) and Pole (A).

STEP 8

Remove Joint Covers (G) from Arm (E) to adjust the

tension using 6mm Allen Wrench (T-C).

T-C

T-A

T-C

LAST UPDATED: 06/13/2022

REV2

Open Monday - Friday 7:00am - 7:00pm CST,

our dedicated support team can oer immediate assistance with rapid response times. If any

parts are received damaged or defective, please contact us. We are happy to replace parts to

ensure you have a fully functioning product.

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com

[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M

- 23% within < 15m

- 38% within < 30m

- 61% within < 1hr

- 83% within < 2hr

- 92% within < 3hr

Love your new VIVO setup and want to share?

Tag us in your photo! @vivo_us

AVG. RESOLUTION TIME (within oice hrs): < 15 M

www.vivo-us.com

Chat live with an agent!

AVG. RESOLUTION TIME (within oice hrs): 5M 4S

309-278-5303

Tabla de contenidos

Otros manuales de Rack y soporte de Vivo

Vivo

Vivo STAND-V002T Manual de usuario

Vivo

Vivo STAND-V002LG Manual de usuario

Vivo

Vivo STAND-V002F Manual de usuario

Vivo

Vivo MOUNT-V001A Manual de usuario

Vivo

Vivo STAND-V003 Manual de usuario

Vivo

Vivo STAND-V002V Manual de usuario

Vivo

Vivo STAND-V002K Manual de usuario

Vivo

Vivo MOUNT-XSXU1 Manual de usuario

Vivo

Vivo STAND-V002K Manual de usuario

Vivo

Vivo DESK-V000U/W Manual de usuario

Vivo

Vivo PP-MWS63D-L Manual de usuario

Vivo

Vivo MOUNT-VP06B Manual de usuario

Vivo

Vivo STAND-V002Z Manual de usuario

Vivo

Vivo DESK-V000U Manual de usuario

Vivo

Vivo MOUNT-SF011 Manual de usuario

Vivo

Vivo STAND-V001T Manual de usuario

Vivo

Vivo STAND-V102L Manual de usuario

Vivo

Vivo MOUNT-MINI1 Manual de usuario

Vivo

Vivo MOUNT-G200B2 Manual de usuario

Vivo

Vivo MOUNT-POLE01 Manual de usuario

Vivo

Vivo STAND-V104C Manual de usuario

Vivo

Vivo Easel Studio STAND-TV70C Manual de usuario

Vivo

Vivo STAND-VAD2 Manual de usuario

Vivo

Vivo MOUNT-SF01M Manual de usuario

Manuales populares de Rack y soporte de otras marcas

Salamander

Salamander Acadia AC/W/L400/WH Manual de usuario

Fohhn

Fohhn VAT-09 Guía del usuario

ricoo

ricoo FS0522 Manual de usuario

AMSOIL

AMSOIL BMK-22 Guía rápida

Kargo Master

Kargo Master 48220 Manual de usuario

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manual de usuario

ricoo

ricoo S1222 Manual de usuario

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manual de usuario

VidaBox

VidaBox VB MNT FFS2 Manual de usuario

Welch Allyn

Welch Allyn 48960 Manual de usuario

Arkon

Arkon CM035-ST-2 Manual de usuario

PROEL

PROEL PLWIN60C Manual de usuario

Agilent Technologies

Agilent Technologies E2609B Manual de usuario

Mustang

Mustang MV-ARM4 Manual de usuario

Mounting Solutions

Mounting Solutions WRM-320 Manual de usuario

Pyle

Pyle PMKSPAD1 Manual de usuario

ShelterIt

ShelterIt 21208 Manual de usuario

SPL

SPL RackPack?4 1040 Manual de usuario