Visonic PowerMax Partitions II Manual de usuario

PowerMax®

A quick start guide to

Partitions II

What Are Partitions?

The PowerMax includes an optional partition feature.

•Partitioning allows you to have up to three independently

controllable areas whereby each can be in the HOME, AWAY

or DISARM state.

Each independent area is called a ‘partition’ and has its own

•denedzones,usercodes,etc.

Partitions provide highly exible control in premises

•where multiple areas need to be monitored or secured

independently.

Using Partitions in the Workplace

Theareainthisexamplehas2ofces(accountant’sandsolicitor’s)

•

Eachofcerunsindependentlywithdifferentworkinghours

•

Thereceptionareaissharedbybothofces

•

Each area has a NEXT motion detector installed•

The reception area is explained later in the ‘L

common area

’

section

STEP 1: Planning & Enabling

The panel comes with partitioning feature disabled.

•

TherststepistoenablePartitionsIIfeature:

•

From the

• INSTALLER MODE select PARTITIONING and

press

Select

• ENABLE and press twice

To avoid confusion and to make installation simpler, it is rec-L

ommended to note down the zones and their corresponding

partitions

STEP 2: Dening Partitions

Partitioning programming is performed via the

• DEFINE ZONES

menu.

For each zone, set the zone type, name and chime option, as

•per the installer manual.

Select the

• PARTITION option (follows CHIME)

The screen will display

• [P1:- P2:- P3:-] Black squares indicate

the partitions to which the current zone is assigned.

Assign the zone to its proper partition or partitions

• (1, 2, or 3).

To select partitions simply press

• , or on the keypad

respectively.

Press

• twicetoconrmthesettings.

A zone must be assigned to at least one partition at all timesL

STEP 3: Setting User Codes & Keyfobs

User code 1 is the master user code and controls all 3 partitions.

•

Otherusercodescancontrolonlyaspecicpartitionoracombi-

•nationofpartitionsdenedbythemasteruserduringsetup.

Afterselectinganddeningusercodes,selectthe

• ACCESS TO

PART menu to associate the user code with a partition or a

partition combination.

Keyfobs are associated with a partition or

•a partition combination during enrolment,

performed via the ENROLLING menu.

To change the partition association of L

keyfobs simply re-enroll the keyfob

Arming and Disarming the System

A user, using a user code or an MCT-237 two-way keyfob,

•can control all partitions associated with the code or keyfob

simultaneously, or an individual partition

When using MCT-234 keyfob or the MCM-140 remote

•commander, a user can only control all the associated partition(s)

simultaneously (i.e. no control over individual partitions).

MCT-237 MCM-140/+ MKP-150MCT-234

Accountants

Reception

Partition 1

Common area

Partition 2

Solicitors

Partition Select Button

PowerMax & MKP-150/151 Keypad

Arming multiple partitions

Arm or Disarm as without partitions

•

All partitions associated with the user code are Armed or Disarmed

•

Arming a specic partition

Press

LCD will show2. SELECT PARTITION

Press3. 1, 2, or 3 to select the partition

Press

4. / (Arm) or (Disarm)

MCT-237 Two-way Keyfob

Arming multiple partitions

Pressing the arming buttons without selecting an individual

•partitionArms/Disarmsalldenedpartitions.

Arming a specic partition

Press

In the LCD display, a digit2. [ P1:- P2:- P3:-] will light to

indicate the currently selected partition

Repeated pressing of

3. selects the following partitions

Press

4. / or within 5 seconds

What are Common Areas?

Consider the reception area in the example of the accountants

and solicitors:

Neitherofceownerwantsthereceptionareatobearmeduntil

•bothofcesarearmedsothatevenifoneofceisoccupied(his

ofcepartitionisdisarmed),thereceptionareamustbedisarmed

This is called a

•

Common Area

Common Areas are used as walkthrough zones to multiple

partitions

There may be more than one

•

Common Area

in an installation

depending on the layout of the property

•

Common Area

is NOT the same as a partition:

It cannot be armed/disarmed directly

•

Common Area zones behave according to the state of the

• partitions sharing the Common Area.

Dening Common Areas

•

Common Area

isdenedbyassigningmorethanone

partition to a zone or a group of zones.

Example:

Accountants’detectorisassignedtotherstPartition

•

Solicitors’ detector is assigned to the second Partition

•

Reception area’s detector is assigned to both partitions and

•forms a common area

Accountants

Reception

Partition 1

Common area

Partition 2

Solicitors

How Zones in Common Area Behave

Zones in common areas behave according to the partition

which is the “least secure”

24hrs zones

Are always armed

•

Perimeter zones

Armed when all partitions they are assigned

•to are either HOME or AWAY

Disarmed if at least one partition to which

•they are assigned to is disarmed

Interior zones

Armed when all partitions they are assigned

•to are AWAY

Disarmed if at least one partition to which

•they are assigned to is HOME or disarmed

Partition Select Button

When one partition is armed AWAY and another armed HOME,

• common area zones are armed HOME. (i.e. Interior zones will

NOT give an alarm).

When all Partitions are armed AWAY, common area zones are

• also armed AWAY.

When even one partition is DISARMED all zones assigned to

• it, including those in common areas, are also disarmed.

Smart Siren

An alarm from a Common Area zone

When a zone in a common area is alarmed, disarming any one

•of the partitions to which that zone is assigned cancels the

alarm and stops the siren.

Concurrent Alarms in different partitions

When several zones are alarmed, and each zone is assigned to

•a different partition, the siren will continue to sound until all

partitions are disarmed.

Alarm in a Common Area Zone

When a zone in a common area initiates an alarm, disarming

one of the Partitions in that common area cancels the alarm

and stops the siren.

Concurrent Alarms in 2 Partitions

When the siren sounds due to the initiation of simultaneous

alarms in two or more partitions, the siren will stop only

when all partitions with alarmed zones are disarmed.

Quick Start Guide

AWAY

HOME

DISARM

AWAY/HOME

AWAY

(3) Siren stops only when BOTH

partitions are disarmed

DISARM

SIREN STOPS

DISARM

(1) While siren is sounding due to alarm

from the rst partition, another alarm

from the second partition occurs

AWAY

ALARM

AWAY

(2) The rst Partition is DISARMED -

siren stops

DISARM

SIREN STOPS

AWAY

ALARM

AWAY

(1) Alarm from zone in reception area

(2) When the rst partition is

DISARMED sirens still sounds

DISARM

ALARM

AWAY

Quick Start Guide

LCD Display

Once the Partition feature is enabled, the LCD will display the

•status of all 3 partitions as [ P1:X P2:X P3:X ].

Where

• “X” is the partition’s status:

R= Ready

N= Not Ready

A= Away

H= Home

D= Entry delay

E= Exit delay

“-” = This partition is not used (does not have zones assigned

to it)

In case of

• TROUBLE or MEMORY, LCD alternates between partitions’

status (explained above) and MEMORY/TROUBLE messages.

Time/Date can be shown as a screen saver textL

LED & Beep Indications

Arming LED

ON = at least one partition is AWAY

•

Blinking = one or more partitions are

•HOME and none are AWAY

OFF = all partitions are DISARMED

•

Trouble LED

Reectsatroubleintheentiresystem,notperpartition

•

More information in “Reviewing Trouble Information” in the

•User Manual.

Exit/Entry delay beeps

Are sounded whenever an Entry/Exit delay is set in at least

•one partition.

Arming options

Quick Arm

In Quick Arm mode, a user has access to arming the system

•without having to identify himself (by entering a code).

With partitions II enabled, arming the system (HOME or AWAY)

•from the keypad or the control panel will arm ALL partitions

(sinceuserisnotidentied).

It is still possible to arm one specic partition, by selecting a L

partition using the partition selection key prior to arming.

Arming using keyfobs is not affected by QuickArmL

Arm Instant

Arm Instant is possible only when arming ALL partitions

•simultaneously

Bypass options

Force Bypass

Setting affects all partitions

•

Manual bypass

The user can bypass zones assigned to any partition with which

•he/she is associated.

PowerMax and Next are registered trademarks of Visonic Ltd. Other names

are the property of their owners. Visonic reserves the right to change information or

specicationswithoutnotice.

Otros manuales para PowerMax Partitions II

Este manual sirve para los siguientes modelos

Otros manuales de Sistema de seguridad de Visonic

Visonic

Visonic SR-720B PG2 Manual de usuario

Visonic

Visonic MCS-720 Manual de usuario

Visonic

Visonic PowerMax10-G2 Instrucciones de montaje

Visonic

Visonic POWERMASTER-10 Manual de usuario

Visonic

Visonic POWERMAXCOMPLETE - INSTALLER GUIDE Manual de usuario

Visonic

Visonic TOWER 10 AM - Manual de usuario

Visonic

Visonic PMASTER20G2 Instrucciones de montaje

Visonic

Visonic PowerMaster-360R Manual de usuario

Visonic

Visonic MCS-710 Manual de usuario

Visonic

Visonic POWERMAXEXPRESS - Instrucciones de montaje

Visonic

Visonic MCS-730 Manual de usuario

Visonic

Visonic PowerMax Complete Manual de usuario

Visonic

Visonic POWERMAXEXPRESS - Instrucciones de montaje

Visonic

Visonic MR-4000 Manual de usuario

Visonic

Visonic POWERMASTER-10 Manual de usuario

Visonic

Visonic MINI-ALERT Manual de usuario

Visonic

Visonic PowerMax Plus Manual de usuario

Visonic

Visonic POWERMASTER-10 Manual de usuario

Visonic

Visonic SR-730 PG2 - Manual de usuario

Visonic

Visonic POWERMAXEXPRESS - Instrucciones de montaje

Visonic

Visonic POWERMAX - Instrucciones de funcionamiento

Visonic

Visonic PowerMaster 360 Instrucciones de montaje

Visonic

Visonic POWERMAX - Manual de usuario

Visonic

Visonic PowerMaster-10 G2 Manual de usuario

Manuales populares de Sistema de seguridad de otras marcas

Inner Range

Inner Range Concept 2000 Manual de usuario

Climax

Climax Mobile Lite R32 Instrucciones de montaje

CADDX

CADDX NX-6 Manual de usuario

FBII

FBII XL-31 Series Manual de usuario

Johnson Controls

Johnson Controls PENN Connected PC10 Manual de usuario

Aeotec

Aeotec Siren Gen5 Manual de usuario

Blaupunkt

Blaupunkt SA 2700 Manual de usuario

IDEAL

IDEAL Accenta Manual del propietario

AJAX

AJAX DoubleButton Manual de usuario

Swann

Swann SW-P-MC2 Manual de usuario

Ecolink

Ecolink Siren+Chime Manual de usuario

Digital Monitoring Products

Digital Monitoring Products XR150 Manual de usuario

EDM

EDM Solution 6+6 Wireless-AE Manual de usuario

Highway Safety Group

Highway Safety Group EA401 Manual de usuario

Siren

Siren LED GSM Manual de usuario

Detection Systems

Detection Systems 7090i Instrucciones de montaje

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manual de usuario

Siemens

Siemens FDM273 Manual de usuario