Viessmann Vitocell 100-E Instrucciones de funcionamiento

Installation and service instructions

for contractors

VIESMANN

Vitocell 100-E

Type SVPA

Heating water buffer cylinder

1500 and 2000 l

For applicability, see the last page

VITOCELL 100-E

5694 385 GB 9/2015 Please keep safe.

Please follow these safety instructions closely to

prevent accidents and material losses.

Safety instructions explained

!Please note

This symbol warns against the risk of material

losses and environmental pollution.

Note

Details identified by the word "Note" contain additional

information.

Target group

These instructions are exclusively intended for author-

ised contractors.

■Work on electrical equipment must only be carried

out by a qualified electrician.

■The system must be commissioned by the system

installer or a qualified person authorised by the

installer.

Regulations to be observed

■National installation regulations

■Statutory regulations for the prevention of accidents

■Statutory regulations for the protection of the envi-

ronment

■Codes of Practice of the relevant trade associations

■All relevant safety regulations as defined by DIN, EN,

DVGW, VDE and locally applicable standards

aÖNORM, EN and ÖVE

cSEV, SUVA, SVTI, SWKI and SVGW

Working on the system

■Isolate the system from the power supply (e.g. by

removing the separate fuse or by means of a mains

isolator) and check that it is no longer 'live'.

■Safeguard the system against reconnection.

!Please note

Electronic assemblies can be damaged by elec-

trostatic discharge.

Prior to commencing work, touch earthed

objects such as heating or water pipes to dis-

charge static loads.

Repair work

!Please note

Repairing components that fulfil a safety func-

tion can compromise the safe operation of your

system.

Replace faulty components with genuine

Viessmann spare parts.

Auxiliary components, spare and wearing parts

!Please note

Spare and wearing parts that have not been tes-

ted together with the system can compromise its

function. Installing non-authorised components

and making non-approved modifications or con-

versions can compromise safety and may inva-

lidate our warranty.

For replacements, use only original spare parts

supplied or approved by Viessmann.

Safety instructions

5694 385 GB

1. Information Disposal of packaging ............................................................................ 4

Symbols ................................................................................................. 4

Intended use .......................................................................................... 5

Product information ................................................................................ 5

2. Preparing for installation Connections ........................................................................................... 6

Siting ...................................................................................................... 6

3. Installation sequence Installation .............................................................................................. 7

■Levelling the heating water buffer cylinder ......................................... 7

■Fitting the thermometer sensor (if supplied) ....................................... 8

■Fitting the 2-part thermal insulation jacket .......................................... 8

■Fitting the cover strips (2-part thermal insulation jacket) .................... 10

■Fitting the 3-part thermal insulation jacket .......................................... 10

■Fitting the cover strips (3-part thermal insulation jacket) .................... 13

■Fitting the cover (2-part thermal insulation jacket) .............................. 14

■Fitting the cover (3-part thermal insulation jacket) .............................. 15

■Fitting the cylinder temperature sensor .............................................. 15

■Connections on the heating water side .............................................. 16

Connecting the equipotential bonding ................................................... 16

4. Parts lists Ordering parts ........................................................................................ 17

Cylinder body ......................................................................................... 18

2-part thermal insulation ........................................................................ 20

3-part thermal insulation ........................................................................ 22

5. Commissioning/service

reports

................................................................................................................ 24

6. Specification Product characteristics .......................................................................... 25

Index

5694 385 GB

Please dispose of packaging waste in line with statu-

tory regulations.

DE: Use the disposal system organised by

Viessmann.

AT: Use the ARA statutory disposal system (Altstoff

Recycling Austria AG, licence number 5766).

CH: Packaging waste is disposed of by the HVAC

contractor.

Symbols

Symbol Meaning

Reference to other document containing

further information

Step in a diagram:

The numbers correspond to the order in

which the steps are carried out.

Warning of material losses and environ-

mental pollution

Live electrical area

Pay particular attention.

■Component must audibly click into place.

■Acoustic signal

■Fit new component.

■In conjunction with a tool: Clean the sur-

face.

Dispose of component correctly.

Dispose of component at a suitable collec-

tion point. Do not dispose of component in

domestic waste.

Information

Disposal of packaging

5694 385 GB

Information

The appliance is only intended to be installed and

operated in sealed unvented systems that comply with

EN 12828 / DIN 1988, or solar thermal systems that

comply with EN 12977, with due attention paid to the

associated installation, service and operating instruc-

tions. DHW cylinders are only designed to store and

heat water of potable water quality. Heating water buf-

fer cylinders are only designed to hold fill water of pot-

able water quality. Only operate solar collectors with

the heat transfer medium approved by the manufac-

turer.

Intended use presupposes that a fixed installation in

conjunction with permissible, system-specific compo-

nents has been carried out.

Commercial or industrial usage for a purpose other

than heating the building or DHW shall be deemed

inappropriate.

Any usage beyond this must be approved by the man-

ufacturer for the individual case.

Incorrect usage or operation of the appliance (e.g. the

appliance being opened by the system user) is prohibi-

ted and results in an exclusion of liability.

Incorrect usage also occurs if the components in the

system are modified from their intended use (e.g.

through direct DHW heating in the collector).

Adhere to statutory regulations, especially concerning

the hygiene of potable water.

Product information

Steel heating water buffer cylinders for storing heating

water in combination with heat pumps, solar thermal

systems, solid fuel boilers and heat recovery.

■Suitable for systems to EN 12828 and DIN 4753.

■Capacity: 1500 or 2000 l

Information

Intended use

5694 385 GB

Information

Fig. 1 Front

AThermometer sensor retainer

BMax. 4 thermometers (TH, accessories)

Fig. 2 Back

AHeating water flow 1 (HF 1)

BHeating water flow 2 (HF 2)/heating water return

(HR 1)

CHeating water return (HR 2)

DHeating water return (HR 3)

ESensor well for thermometer sensor (TR 1)

FSensor well for thermometer sensor (TR 2)

GSensor well for thermometer sensor (TR 3)

HSensor well for thermometer sensor (TR 4)

Siting

!Please note

To prevent material losses, site the DHW cylin-

der in a room free from the risk of frost and

draughts.

Otherwise the DHW cylinder must be drained

when not in use and there is a risk of frost.

■Provide adequate clearance from the wall to allow for

operation of the temperature controller (if installed).

■Placing the cylinder on a plinth will make the room

easier to clean.

Preparing for installation

Connections

5694 385 GB

Installation

!Please note

The thermal insulation must not come into con-

tact with naked flames.

Exercise caution when welding and brazing.

Levelling the heating water buffer cylinder

Note

Seal connections that are not required with caps.

Fig. 3

AType plate

B3 adjustable feet

3. Insert the adjustable feet into the legs as far as they

will go. Use the adjustable feet to level the cylinder.

Note

Never extend the adjustable feet beyond a total

length of 30 mm.

Installation sequence

Installation

5694 385 GB

Installation

Fitting the thermometer sensor (if supplied)

Fig. 4

1. Guide the thermometer sensor through the cover

strip and insert the thermometer.

2. Insert 3 thermometer sensors into the clamping

bracket as far as they will go and tighten the wing

nut.

Steps 3 to 6 only for thermometer sensor TR 3:

Pull the sensor retainer from the sensor well.

4. Position the sensor on the outside of the sensor

retainer contact spring so that it is flush with the

front of the spring.

Note

Never wrap insulating tape around the thermometer

sensor.

5. Secure the thermometer sensor lead.

6. Insert the sensor retainer.

Fitting the 2-part thermal insulation jacket

Note

■2 people are required for the following work.

■Ensure that no fleece remnants enter the cylinder

through the cylinder connections.

Clip fasteners on each cylinder side:

1500 l: 6 pce

2000 l: 9 pce

Installation sequence

Installation (cont.)

5694 385 GB

Installation

Fig. 5

1. At the back of the cylinder: Attach clip fasteners to

the edges of the right and left sections of the ther-

mal insulation jacket. Place the thermal insulation

jacket around the cylinder body.

Note

Leave the clip fasteners in the first notch.

2. At the front of the cylinder: Attach clip fasteners to

the edges of the right and left sections of the ther-

mal insulation jacket.

3. Push the clip fasteners at the back of the cylinder

as close together as possible.

4. Push the clip fasteners at the front of the cylinder

as close together as possible.

Installation sequence

Installation (cont.)

5694 385 GB

Installation

Fitting the cover strips (2-part thermal insulation jacket)

Fig. 6

AType plate

Fit the thermal insulation jacket evenly around the cyl-

inder body by patting it.

Fitting the 3-part thermal insulation jacket

Note

■2 people are required for the following work.

■Ensure that no fleece remnants enter the cylinder

through the cylinder connections.

Clip fasteners on each cylinder side:

1500 l: 6 pce

2000 l: 9 pce

Installation sequence

Installation (cont.)

5694 385 GB

Installation

Otros manuales para Vitocell 100-E

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Sistema de calefacción de Viessmann

Viessmann

Viessmann VITODENS 200 WB2B Manual de usuario

Viessmann

Viessmann NC-Box Instrucciones de funcionamiento

Viessmann

Viessmann VITOCELL 300-H Guía de inicio rápido

Viessmann

Viessmann Vitovalor PA2 Instrucciones de funcionamiento

Viessmann

Viessmann VITOTRONIC 100 Manual de usuario

Viessmann

Viessmann VITOVENT 300 Manual de usuario

Viessmann

Viessmann Vitocell 100-H Instrucciones de funcionamiento

Viessmann

Viessmann Vitoligno 300-H Instrucciones de funcionamiento

Viessmann

Viessmann VITODENS Manual de usuario

Viessmann

Viessmann Vitodens 100-W Manual de usuario

Viessmann

Viessmann Vitotronic 200 KW2 Manual de usuario

Viessmann

Viessmann Vitodens 100-W Manual de usuario

Viessmann

Viessmann Vitodens 100-W Manual de usuario

Viessmann

Viessmann Vitocell 100-H Guía de inicio rápido

Viessmann

Viessmann Vitodens series Manual de usuario

Viessmann

Viessmann AC-Box Instrucciones de funcionamiento

Viessmann

Viessmann VITODENS Manual de usuario

Viessmann

Viessmann VITOCELL 100-W Instrucciones de funcionamiento

Viessmann

Viessmann VITOSOL300 Manual de usuario

Viessmann

Viessmann VITODENS Manual de usuario

Viessmann

Viessmann Vitodens 100-W Manual de usuario

Viessmann

Viessmann VITOTRONIC 200 Manual de usuario

Viessmann

Viessmann Vitotronic 200 Series Instrucciones de funcionamiento

Viessmann

Viessmann VITOTRONIC 300 Manual de usuario

Manuales populares de Sistema de calefacción de otras marcas

aerauliqa

aerauliqa QR350ABP Manual de usuario

WatchGas

WatchGas ATEX BEACON Manual de usuario

Lampoassa

Lampoassa 203GT Manual de usuario

MSA

MSA SOA-1022 Manual de usuario

nilan

nilan Compact P Manual de usuario

ITR

ITR OASIS NE-S Manual de usuario

Carrier

Carrier 48LJD Dimensiones y guía de instalación

aldes

aldes EVEREST XV Manual de usuario

Kober

Kober C22SPV23MEF Manual de usuario

Oxygen

Oxygen X-Air V400 Manual de usuario

Carrier

Carrier FB4CNF Manual de usuario

Kroll

Kroll HM200 Manual

Kroll

Kroll HM200 Manual

NuAire

NuAire XBOXER XBC Series Manual de usuario

Trane

Trane VR104GD-U Series Manual de usuario

Vents

Vents VUT V mini Manual de usuario

Magnum Heating

Magnum Heating W-CONTROL Manual de usuario

Solar 3C

Solar 3C 3C382B Guía de solución de problemas