Viessmann VITOLIGNO 300-P Instrucciones de funcionamiento
Service instructions
for contractors
VIESMANN
Vitoligno 300-P
Type VL3B
Pellet boiler
For applicability, see the last page
VITOLIGNO 300-P
5692 805 GB 4/2009 Please keep safe.
2
Please follow these safety instructions closely to prevent accidents and mate-
rial losses.
Safety instructions explained
Danger
This symbol warns against the
risk of injury.
!Please note
This symbol warns against the
risk of material losses and envi-
ronmental pollution.
Note
Details identified by the word "Note" con-
tain additional information.
Target group
These instructions are exclusively
designed for qualified personnel.
■ Work on gas equipment must only be
carried out by a qualified gas fitter.
■ Work on electrical equipment must
only be carried out by a qualified elec-
trician.
■ The system must be commissioned by
the system installer or a qualified per-
son authorised by the installer.
Regulations
Observe the following when working on
this system
■ all legal instructions regarding the pre-
vention of accidents,
■ all legal instructions regarding envi-
ronmental protection,
■ the Code of Practice of relevant trade
associations,
■ all current safety regulations as
defined by DIN, EN, DVGW, TRGI,
TRF, VDE and all locally applicable
standards,
■ Gas Safety (Installation & Use) Regu-
lations
– the appropriate Building Regulation
either the Building regulations, the
Building Regulation (Scotland),
Building Regulations (Northern Ire-
land),
– the Water Fittings Regulation or
Water Bylaws in Scotland,
– the current I.E.E. Wiring Regula-
tions.
If you smell gas
Danger
Escaping gas can lead to explo-
sions which may result in serious
injury.
■ Never smoke. Prevent naked
flames and sparks. Never
switch lights or electrical appli-
ances ON or OFF.
■ Close the gas shut-off valve.
■ Open windows and doors.
■ Remove all people from the
danger zone.
■ Notify your gas or electricity
supplier from outside the build-
ing.
■ Shut off the electricity supply to
the building from a safe place
(outside the building).
Safety instructions
Safety instructions
5692 805 GB
3
If you smell flue gas
Danger
Flue gas can lead to life-threat-
ening poisoning.
■ Shut down the heating system.
■ Ventilate the boiler room.
■ Close all doors leading to the
living space.
Working on the system
■ When using gas as fuel, also close the
main gas shut-off valve and safeguard
against unauthorised reopening.
■ Isolate the system from the power sup-
ply and check that it is no longer 'live',
e.g. by removing a separate fuse or by
means of a main isolator.
■ Safeguard the system against unau-
thorised reconnection.
!Please note
Electronic modules can be dam-
aged by electro-static dis-
charges.
Touch earthed objects, such as
heating or water pipes, to dis-
charge static loads.
Repair work
!Please note
Repairing components which ful-
fil a safety function can compro-
mise the safe operation of your
heating system.
Replace faulty components only
with original Viessmann spare
parts.
Ancillary components, spare and
wearing parts
!Please note
Spare and wearing parts which
have not been tested together
with the heating system can com-
promise its function. Installing
non-authorised components and
non-approved modifications/con-
version can compromise safety
and may invalidate our warranty.
For replacements, use only orig-
inal spare parts from Viessmann
or those which are approved by
Viessmann.
Safety instructions
Safety instructions (cont.)
5692 805 GB
4
Commissioning, inspection, maintenance
Steps - commissioning, inspection and maintenance.......................................... 5
Further details regarding the individual steps....................................................... 6
Codes
Resetting codes to their delivered condition......................................................... 44
Code 1.................................................................................................................. 44
Code 2.................................................................................................................. 50
Service scans
Service functions.................................................................................................. 70
Temperatures, boiler coding card and brief scans............................................... 70
Scanning operating conditions and sensors ........................................................ 75
Troubleshooting
Fault display......................................................................................................... 76
Repairs................................................................................................................. 85
Function description
Display and control elements............................................................................... 103
Control functions.................................................................................................. 103
Vacuum supply system........................................................................................ 118
Pellet combustion sequence chart....................................................................... 119
Designs
Connection and wiring diagram............................................................................ 121
Parts lists............................................................................................................ 126
Commissioning/service reports........................................................................ 136
Specification....................................................................................................... 137
Certificates
Declaration of conformity...................................................................................... 139
Keyword index.................................................................................................... 140
Index
Index
5692 805 GB
5
For further information regarding the individual steps, see the page indicated
Commissioning steps
Inspection steps
Maintenance steps Page
•1. Fill heating system......................................................... 6
••• 2. Checking all connections on the heating water side
for leaks
•3. Switching the power ON................................................ 6
•4. Language selection........................................................ 10
• • 5. Setting the time and date............................................... 11
•6. Configuring the supply system..................................... 11
•7. Commissioning the supply system.............................. 11
•8. Setting delivery times for fuel supply........................... 12
•9. Matching the control unit to the heating system ........ 12
•10. Checking outputs (actuators) and sensors.................. 29
•11. Adjusting the heating curves........................................ 31
•12. Integrating a control unit into the LON......................... 34
• • 13. Shutting down the system............................................. 36
• • 14. Cleaning the combustion chamber............................... 37
•15. Cleaning the secondary heating surfaces.................... 38
•16. Cleaning the flue gas fan and the Lambda probe........ 39
• • 17. Emptying the ash container (if required)...................... 40
• • 18. Checking the diaphragm expansion vessel and
system pressure............................................................. 41
••• 19. Checking the function of safety valves
•20. Display "Maintenance"................................................... 42
•21. Instructing the system user........................................... 43
Commissioning, inspection, maintenance
Steps - commissioning, inspection and maintenance
5692 805 GB
6
Fill heating system
A
1. Check the pre-charge pressure of the
diaphragm expansion vessel.
If the pre-charge pressure of the dia-
phragm expansion vessel is lower
than the static system pressure, top
up with nitrogen until the pre-charge
pressure has risen by 0.1 to 0.2 bar.
Adjust the pre-charge pressure
accordingly if it is too high.
2. Open the check valves.
3. Top up your heating system with
water and vent until the filling pres-
sure is 0.1 to 0.2 bar higher than the
pre-charge pressure of the dia-
phragm expansion vessel.
Permiss. operating pressure: 3 bar
Test pressure: 4 bar
4. Mark this pressure at pressure gauge
A.
5. Return the check valves to their oper-
ating position.
Switching the power ON
After switching the power ON, a start-up sequence commences:
■ Select language
■ Set time and date
■ Supply system configuration
■ Supply system commissioning
When configuring the supply system, the
following are available for selection:
Commissioning, inspection, maintenance
Further details regarding the individual steps
5692 805 GB
7
– "only holding hopper" for pellet sup-
ply from the boiler hopper only (not
shown).
– "Suction system" for pellet supply via
auger discharge from the pellet storage
room and onward transportation via a
vacuum system:
Commissioning, inspection, maintenance
Further details regarding the individual steps (cont.)
5692 805 GB
8
– "Auger system" for pellet supply from
the pellet storage room via an auger sys-
tem:
Commissioning, inspection, maintenance
Further details regarding the individual steps (cont.)
5692 805 GB
9
– "Suction system + silo" for pellet
supply from a pellet silo via a vacuum
system:
Commissioning, inspection, maintenance
Further details regarding the individual steps (cont.)
5692 805 GB
10
– "Auger + silo" for pellet supply from a
pellet silo via an auger system:
– "Suction sys. + mole" Available
later.
Menu structure overview:
Vitoligno operating instructions
Language selection
Shortly after switching the power ON, the
display shows "Select language".
Press the following keys:
1. |/~for the required language.
Commissioning, inspection, maintenance
Further details regarding the individual steps (cont.)
5692 805 GB
Otros manuales para VITOLIGNO 300-P
4
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Caldera de Viessmann
Viessmann
Viessmann Vitocrossal 300 CA3B Instrucciones de instalación
Viessmann
Viessmann VITOLIGNO 300-C Instrucciones de funcionamiento
Viessmann
Viessmann VITODENS 200 Manual de usuario
Viessmann
Viessmann VITOCROSSAL 300 Instrucciones de funcionamiento
Viessmann
Viessmann Vitoflex 300-RF Series Guía de instalación y uso
Viessmann
Viessmann Vitorond 100 Guía rápida
Viessmann
Viessmann VITOCELL 100-V Manual de usuario
Viessmann
Viessmann Vitotronic 100 GC1 Guía rápida
Viessmann
Viessmann Vitopend 100-W Guía rápida
Viessmann
Viessmann VITODENS 200 Manual de instrucciones
Viessmann
Viessmann Vitocrossal 200 CM2 246 Manual de usuario
Viessmann
Viessmann Vitocrossal 200 Series Instrucciones de funcionamiento
Viessmann
Viessmann Vitodens 300 Instrucciones de funcionamiento
Viessmann
Viessmann Vitodens 200-W System Instrucciones de funcionamiento
Viessmann
Viessmann VITOROND 200 VD2A-125 Manual de usuario
Viessmann
Viessmann VITOCROSSAL 300 Manual de instrucciones
Viessmann
Viessmann VITOCELL 300V Manual de instrucciones
Viessmann
Viessmann VITOFLEX 300-UF Manual de instrucciones
Viessmann
Viessmann VITODENS 200 WB2A Nota de publicación
Viessmann
Viessmann Vitodens 100-W Guía rápida
