Vicon V992D-N4 Manual de instrucciones

Quick User Guide Network Camera

Warning before installation

-Power off the Network camera if it is found to be smoking or smells unusual.

-Keep the Network camera away from water. If the Network camera gets wet, power

off immediately.

-Do not place the Network camera near heat sources, such as a television or oven.

-Refer to your product datasheet/specification for the operating temperature.

-Keep the Network camera away from direct sunlight.

-Do not place the Network camera in high humidity environments.

-Do not place the Network camera on unsteady surfaces.

-Do not touch the Network camera when there is lightning present.

-Do not disassemble the Network camera.

-Do not drop the Network camera.

-Do not insert any object, such as a screwdriver, into the Network camera.

For other safety and regulation information, refer to “User’s manual.”

1. Check Contents

No.

Item

Description

Network Camera

V992D-N4

Software CD

User’s manual, Utility software

Quick User Guide

This document

Accessories

Silica gel

Template for installation

Video monitor cable

Tapping Screw M4x30: 3 pcs

Anchor: 3 pcs

Screw M4x8: 4 pcs

Surface Mount Bracket

L-Wrench (T20)

Focus Adjust Ring

Anti-reflection collar (rubber)

2. Physical Description

Installation of Anti-Reflection Collar

Quick User Guide Network Camera

①Control Button

-Change Video output format NTSC/PAL (toggle)

-Factory Default (hold steadily for more than 10 seconds)

②Network LED

③Status LED

④Reset Button

⑤Video output for service monitor

⑥Lock nut

⑦Focus adjustment

⑧Network (RJ-45 PoE required)

3. Making Connection

Connect Ethernet cable to make a connection to the PoE hub.

The camera supports PoE only.

4. Assign IP Address

The default setting of the camera is set to “DHCP” and “UPnP” function is

set to ON. If you have a DHCP server on your network and UPnP function is

enabled on your PC you can find the network camera in “My network”.

If a DHCP server is not available on your network, assign IP address by

the following process.

Execute Multi Upgrade Tool (from the Installation CD). It will search cameras on

the network automatically.

1) After the list of detected devices appears, select the camera you are trying to

configure.

Quick User Guide Network Camera

2) Select the Network type as Static or DHCP. If Static is selected, enter all of the

network information for your camera.

3) Select the “Change IP Address” button. The message “Do you want to change IP

address?” will display; select “Yes” from the pop-up window.

4) Check the Type as Static or DHCP from the list.

Then double click the camera in the list; Internet Explorer® will open

automatically.

Quick User Guide Network Camera

5. Web Browser Connection

Note: The Network camera supports Internet Explorer 7 or above.

Please check version of your browser and update it if necessary.

When you first access the camera you need to download and install an

Active X control from the camera to display a Live View image.

Default User and Password are set to “ADMIN” and “1234”. Please type in

the user ID and password to connect the network camera.

Note: By Default the cameras come with “Installation Mode” set to “ON” to

enable Analog output. Additionally, all installation setup must be done prior

to the camera being used with a VMS, including ViconNet; the VMS forces

the Installation Mode to OFF. You must turn Installation Mode to Off to use

720p or 1080p streaming.

For further information on setup, refer to User’s manual on the software CD.

Tabla de contenidos

Otros manuales de Cámara de seguridad de Vicon

Vicon

Vicon SURVEYOR 2000 S2000-CC22-EX Manual de usuario

Vicon

Vicon VC5050-DSP Manual de usuario

Vicon

Vicon I-ONYX VND-970IP Manual de usuario

Vicon

Vicon Surveyor 99 Manual del propietario

Vicon

Vicon Roughneck V2000D-PTZ Manual de usuario

Vicon

Vicon V840D Series Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Vicon

Vicon V661D-312IR Instrucciones de funcionamiento

Vicon

Vicon rouchneck V910V5 Manual de usuario

Vicon

Vicon V2000D-W28IRM Manual de usuario

Vicon

Vicon Roughneck Pro V2000 Series Manual de usuario

Vicon

Vicon SurveyorVFT Manual de usuario

Vicon

Vicon V960-N Series Manual de instrucciones

Vicon

Vicon Roughneck V920D Series Manual

Vicon

Vicon V940D Manual de usuario

Vicon

Vicon ROUGHNECK V910 Manual de usuario

Vicon

Vicon SN118C Manual de usuario

Vicon

Vicon Surveyor 282-20-02 Series Manual de usuario

Vicon

Vicon V988D Manual de usuario

Vicon

Vicon V662-D-2 Instrucciones de funcionamiento

Vicon

Vicon Surveyor 2000-MSH Manual de usuario

Vicon

Vicon S10-CH Mini Manual de usuario

Vicon

Vicon V1008-WIR-180 Manual de usuario

Vicon

Vicon CE202D-N Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario

Lumens

Lumens VC-A50PNW Manual de usuario