Vicon V960D-N312 Manual de instrucciones

Quick User Guide V960D Series Indoor Network Camera

Warning before installation

-Power off the Network camera if it is found to be smoking or smells unusual.

-Keep the Network camera away from water. If the Network camera gets wet, power

off immediately.

-Do not place the Network camera near heat sources, such as a television or oven.

-Refer to your instruction manual for the operating temperature.

-Keep the Network camera away from direct sunlight.

-Do not place the Network camera in high humidity environments.

-Do not place the Network camera on unsteady surfaces.

-Do not touch the Network camera when there is lightning present.

-Do not disassemble the Network camera.

-Do not drop the Network camera.

-Do not insert any object into the Network camera, such as a screwdriver.

For other safety and regulation information, please refer to “User’s manual”.

1. Check Contents

No.

Item

Description

Network Camera

V960D Series (V960D-N312, V960D-N312M,

V960D-N922M, V961D-N312, V961D-N312M,

V961D-N922M, V962D-N312, V962D-N312M,

V962D-N922M,)

Software CD

User’s Manual, Utility software

Quick User Guide

This document

Accessories

Template for installation

Video monitor cable

Tapping Screw 4x30: 2pcs

Anchor: 2pcs

Tapping Screw for middle cover 3x8: 2pcs

Network extension cable

Power cable

2. Physical Description

1. Network (RJ-45 PoE supported)

2. Power (DC12V / AC24V)

3. I/O signal terminal block

-Audio In (Line in)

-Audio Out (Line Out)

-Alarm In (Dry Contact)

-Alarm Out (Relay out [2A:AC120V/DC60V])

Quick User Guide V960D Series Indoor Network Camera

4. Micro SD card (SDHC supported)

5. Reset Button

6. Status LED

7. Video output for service monitor

3. Making Connection

1. If you have external devices such

as sensor or alarms, make connection

from connectors

2. Connect Ethernet cable to make

connection to the network hub.

3. Connect power cable to the camera.

When you use PoE function, you don’t

need to connect power.

Quick User Guide V960D Series Indoor Network Camera

4. Assign IP address

Default setting is set to “DHCP” and “UPnP” function is set to ON. If your network

has a DHCP server and the UPnP function is enabled on your PC, you can find the

camera in “My Network”. Refer to the Multi Upgrade Tool manual for detailed

instructions.

Execute the Multi Upgrade Tool (from the Installation CD); it will search cameras on

the network automatically.

1) After the list of detected devices appears, select the camera you are trying to

configure.

2) Select the Network type as Static or DHCP. If Static is selected, enter all of the

network information for your camera.

3) Select the “Change IP Address” button. The message “Do you want to change IP

address?” will display; select “Yes” from the pop-up window.

4) Check the Type as Static or DHCP from the list.

Then double click the camera in the list; Internet Explorer® will open

automatically.

Quick User Guide V960D Series Indoor Network Camera

5. Web Browser Connection

Note: The Network camera supports Internet Explorer® 7 or above.

Please check version of your browser and update it if necessary.

When you first access the camera you need to download and install an

Active X control from the camera to display a Live image.

Default User and Password are set to “ADMIN” and “1234”. Please type in

the user ID and password to connect the network camera.

Note: By Default the cameras come with “Installation Mode” set to “ON” to

enable Analog output. Additionally, all installation setup must be done prior to

the camera being used with a VMS, including ViconNet; the VMS forces the

Installation Mode to OFF. You must turn installation mode off to use 720p or

1080p streaming.

For further information on setup, refer to User’s manual on software CD.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cámara de seguridad de Vicon

Vicon

Vicon V8360W Series Manual de usuario

Vicon

Vicon VC2200-12 Guía del usuario

Vicon

Vicon ROUGHNECK V-CELL-HD-B Manual de usuario

Vicon

Vicon V960D-N312M Manual de instrucciones

Vicon

Vicon Cruiser SN663V-A Manual de usuario

Vicon

Vicon SurveyorVF SVFT-M Manual de usuario

Vicon

Vicon Cruiser SN663V Instrucciones de funcionamiento

Vicon

Vicon V661-N-1 Series Instrucciones de funcionamiento

Vicon

Vicon V2008-WNL-LPR Manual de usuario

Vicon

Vicon V662-D Instrucciones de funcionamiento

Vicon

Vicon XX152-02-00 Manual de usuario

Vicon

Vicon ROUGHNECK V910 Manual de usuario

Vicon

Vicon VC367DSP Manual de usuario

Vicon

Vicon SVR-C Manual de usuario

Vicon

Vicon CE202D-WN Manual de usuario

Vicon

Vicon VC466-DSP Manual de usuario

Vicon

Vicon XX247-10-01 Manual de usuario

Vicon

Vicon V940B Manual de usuario

Vicon

Vicon V15CCM-IR-2 Series Rouchneck Manual de usuario

Vicon

Vicon ROUGHNECK V910V4 Manual de usuario

Vicon

Vicon Roughneck V2000D-PTZ Manual de usuario

Vicon

Vicon Cruiser SN693V Manual de usuario

Vicon

Vicon VN-755IPV4 Manual de usuario

Vicon

Vicon SN680D-WNIR Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario

Lumens

Lumens VC-A50PNW Manual de usuario