Vicon V672B Instrucciones de funcionamiento

V672B HD Analog Bullet Cameras

Installation and Operation Guide

Vicon Industries Inc. does not warrant that the functions contained in this equipment will

meet your requirements or that the operation will be entirely error free or perform

precisely as described in the documentation. This system has not been designed to be

used in life-critical situations and must not be used for this purpose.

Document Number: 8009-8299-30-00 Product specifications subject to change without

Vicon Industries Inc.

Tel: 631-952-2288) Fax: 631-951-2288

Toll Free: 800-645-9116

24-Hour Technical Support: 800-34-VICON

(800-348-4266) UK: 44/(0) 1489-566300

www.vicon-security.com

XX299-30

FCC COMPLIANCE STATEMENT

CE COMPLIANCE STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) this device may not cause harmful interference, and (2) this device

must accept anyinterference received, including interference thatmaycause undesired

operation.

FCC INFORMATION: This equipment has been tested and found to comply with the

limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in accordance

with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference

in which case the user will be required to correct the interference at his own expense.

CAUTION: Changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to operate the equipment.

WARNING: This is a Class A product. In a domestic environment this product may

cause radio interference in which case the user may be required to take adequate

measures.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.\

3. Heed all warnings.

4. Follow all instructions.

5. Do not block any ventilation openings. Install in accordance with the manufacturer’s

instructions.

6. Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

7. Only use attachments/accessories specified by the manufacturer.

8. Use only with the cart, stand, tripod, bracket, or table specified by

The manufacturer, or sold with the apparatus. When a cart is used,

Use caution when moving the cart/ apparatus combination to avoid

Injury from tip-over.

9. CAUTION – THESE SERVICING IN STRUCTIONS ARE FOR USE BY QUALIFIED

SERVICE PERSONNEL ONLY. TO REDUCE THE RISK OF ELECTRIC SHOCK DO

NOT PERFORM ANY SERVICING OTHER THAN THAT CONTAINED IN THE

OPERATING INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO.

10. Use satisfy clause 2.5 of IEC60950-1/UL 60950-1 or Certified/Listed Class 2

power source only.

11. Indoor use only.

EXPLANATION OF GRAPHICAL SYMBOLS

The lighting flash with arrowhead symbol, within an equilateral triangle, is

Intended to alert the user to the presence of uninsulated “dangerous voltage”

within the product`s enclosure that may be of sufficient magnitude to constitute

a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user

to the presence of important operating and maintenance (servicing)

instructions in the literature accompanying the appliance.

LIMITATION OF LIABILITY

THE INFORMATION IN THIS PUBLICATION IS BELIEVED TO BE ACCURATE IN ALL

RESPECTS; HOWEVER, WE CANNOT ASSUME RESPONSIBILITY FOR ANY

CONSEQUENCES RESULTING FROM THE USE THEREOF. THE INFORMATION

CONTAINED HEREIN IS SUBJECT TO CHANGE WITHOUT NOTICE. REVISIONS OR

NEW EDITIONS TO THIS PUBLICATION MAY BE ISSUED TO INCORPORATE SUCH

CHANGES.

PRECAUTIONS

Before installation, carefully read the manual to ensure correct operation and setup,

heeding all warnings and instructions.

Do not block any ventilation openings. Install in accordance with the manufacturer's

instructions.

Ensure manual is kept in good condition for future use.

Do not install the device near any heat sources such as radiators, heat registers, stoves,

or other equipment(including amplifiers) that produce heat.

Only use attachments/accessories specified by the manufacturer.

Should any liquid get into the housing, immediately disconnect the device from the power

supply and have it checked by authorized personnel before reusing.

Do not install the device in a place where it is exposed to gas or oil.

Installation and servicing by authorized personnel only, adhering to local safety

regulations.

Unless you are an authorized technician, never try to dismantle the device. To avoid

electric shock, never remove the screws or covers.

If a camera, do not expose the device to radioactivity. It will cause serious damage to the

CCD.

Use Certified/Listed Class 2 power source only.

Cleaning

Clean the device with a slightly damp soft cloth. Use a mild household detergent. Never

use strong solvents such as thinner or benzene as they might damage the finish of the

unit.

TABLE OF

CONTENTS

INTRODUCTION -------------------------------------------------------------------------- 6

CAMERA CONNECTION --------------------------------------------------------------- 7

LENS ADJUSTMENT -------------------------------------------------------------------- 7

CONTENTS OF PACKAGE ------------------------------------------------------------ 8

INSTALLATION ---------------------------------------------------------------------------- 8

STRUCTURE OF THE SETUP MENU ----------------------------------------------- 9

DC AUTO IRIS LENS ------------------------------------------------------------------- 15

SPECIFICATIONS ----------------------------------------------------------------------- 16

EXTERNAL DIMENSION ------------------------------------------------------------ 18

６

INSTRUCTION

The 1/2.8” 2.1M Full HD CMOS camera, especially for closed circuit television

CCTV and security surveillance application.

Features:

• High performance SONY 1/2.8” 2.1M STARVIS CMOSTM

• Min. illumination 0.03 lux (Color), 0 lux(BW, IR LED ON)

• Auto electronic shutter [1/30 (1/25) ~ 1/30,000] and manual electronic shutter

modes

• True WDR (Wide Dynamic Range) in HD mode

• D-WDR (Digital Wide Dynamic Range) in composite mode

• BLC (Back-light compensation)

• HLC (High-light compensation)

• Auto and manual white balance modes (AUTO/AUTOext/Manual/AWB)

• Day & Night (ICR): Auto/Color/BW/EXTERN

• OSD (on screen display)

• DNR (Digital Noise Reduction)

• IR Range distance up to 130 ft/40 m

• 42EA, 850nm IR LEDs

• Privacy Mask function (16 zones)

• Motion Detection (4 zones)

• Defog

• Composite Video Output (700TV Lines)

• Operates in 24 VAC ± 10%/12 VDC ± 10%

• Use Certified / Listed Class 2 Power source only

IMPORTANT: The user of this camera is responsible for checking and

complying with local, state, and federal laws and statutes concerning the

recording and monitoring of audio signals.

７

CAMERA CONNECTION

①Power: 24 VAC/12 VDC power source from a 12 VDC or 24 VAC ±10%,

60/50Hz±1Hz; use Certified/Listed Class 2 power source only.

12 VDC Type => 12 VDC ±10% (12 VDC is polarity dependent)

If using 12 VDC power adaptor, use power supply capable of supplying 8 Watts.

②Video (HD): BNC (Black) connector used to connect the camera to a DVR, etc.

③Video (CVBS): BNC (Yellow) connector used to connect the camera to a

DVR, etc.

④Tact Switch for OSD control

⑤SPOT: Spot connector used to check video(CVBS) output.

８

LENS ADJUSTMENT

Tact Switch for motorized lens control

without being in the OSD:

Up – Zoom in

Down – Zoom out

The lens will then autofocus the lens

based on the overall scene being viewed.

CONTENTS OF PACKAGE

Installation of the camera must be performed by qualified service personnel in

accordance with all local and national electrical and mechanical codes.

Carefully remove the color camera and its accessories from the carton and verify that

they were not damaged in shipment.

The content of the package includes:

1. Camera in housing

2. This manual

3. Accessory kit for installing

4. Sunshield Bolt

5. Sunshield

９

INSTALLATION

CAUTION

Adjusting the position of the camera after installation could potentially damage the cable.

１０

STRUCTURE OF THE SETUP MENU

<MENU>

FOCUS SETUP

EXPOSURE

BACKLIGHT

DAY&NIGHT

AWB

DNR

IMAGE

SYSTEM

EXIT

AF MODE

SCANNING

ONPUSHAF

SYNC TDN

INITIAL

RETURN

IRIS

BRIGHTNESS

SHUTTER

SENS-UP

AGC

RETURN

OFF

HLC

BLC

WDR

<DAY&NIGHT>

EXTERN

AUTO

COLOR

B&W

<AWB>

AUTO

AUTOext

PRESET

MANUAL

<DNR>

OFF

LOW

MIDDLE

HIGHT

<IMAGE>

COLOR GAIN

SHARPNESS

GAMMA

MIRROR

FLIP

D-WDR

DEFOG

PRIVACY

MOTION

RETURN

OUTPUT

FRAME RATE

FREQ

LANGUAGE

SETUP

RESET

RETURN

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cámara de seguridad de Vicon

Vicon

Vicon Roughneck V920D Series Manual

Vicon

Vicon Cruiser SN660V Instrucciones de funcionamiento

Vicon

Vicon V992E Manual de usuario

Vicon

Vicon SN688D-WIR Manual de usuario

Vicon

Vicon SURVEYORVFT SVFT Manual de usuario

Vicon

Vicon VC355-DSP Manual de usuario

Vicon

Vicon VC-700WDR Manual de usuario

Vicon

Vicon V920B-A Series Manual de usuario

Vicon

Vicon Surveyor 99 Manual de usuario

Vicon

Vicon ROUGHNECK V910 Manual de usuario

Vicon

Vicon V672D Instrucciones de funcionamiento

Vicon

Vicon Roughneck AI V2000D Series Manual de usuario

Vicon

Vicon SN240D Manual de usuario

Vicon

Vicon SurveyorVFT SVFT-M Manual de usuario

Vicon

Vicon V661-N-1 Series Instrucciones de funcionamiento

Vicon

Vicon V661V-Series Instrucciones de funcionamiento

Vicon

Vicon CE202D-N Manual de usuario

Vicon

Vicon V9317H Series Manual de usuario

Vicon

Vicon V662-D Instrucciones de funcionamiento

Vicon

Vicon V840D Series Manual de usuario

Vicon

Vicon Surveyor MKII Manual del propietario

Vicon

Vicon SVR-C Manual de usuario

Vicon

Vicon V2008-WNL-LPR Manual de usuario

Vicon

Vicon V800D Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario

Lumens

Lumens VC-A50PNW Manual de usuario