Vicon Cruiser SN663V Manual de usuario

www.vicon-security.com

XX249-40-00

Cruiser™ SN663V Outdoor PTZ

Network Camera Dome

Vicon Industries Inc. does not warrant that the functions contained in this equipment will meet your requirements or that the

operation will be entirely error free or perform precisely as described in the documentation. This system has not been designed

to be used in life-critical situations and must not be used for this purpose.

Vicon Industries Inc.

Tel: 631-952-2288 Fax: 631-951-2288 Toll Free: 800-645-9116

24-Hour Technical Support: 800-34-VICON (800-348-4266) UK: 44/(0) 1489-566300

Document Number: 8009-8249-40-00

Product specications subject to change without notice.

Issued: 1113

Quick Guide

1. Description

The SN663V network camera is an outdoor PTZ camera dome that includes a 1080p high

resolution camera lens combination that provides video transmission over a network. It is fully

featured for security surveillance and remote monitoring needs.

The network camera supports H.264 compression technology as well as M-JPEG compression. By

using its dedicated program, multiple users are able to have access to the network camera

simultaneously or a single user can monitor various network cameras at the same time. It also

enables users to play, store and retrieve a monitoring image by using a PC. All the settings and

real-time monitoring screens are provided through access to the web.

1.1 Components

The camera is designed to be a compact small size with a hard dome camera housing constructed

of aluminum, steel and plastic. The housing is designed to be mounted on a wall or a ceiling. The

housing meets the Protection Classification IP66 standards for dust and moisture resistance.

* Dome Camera 1

* Installation Guide/CD 1

* Template Sheet 1

* Mounting Bracket 1

* Safety Lanyard 1

* Accessory Kit 1

1) Mounting screws (PH6 x 35.0) (4)

2) Plastic anchors (4)

3) O-Rings (4)

4) Torx wrench (1)

* Accessory Connector 1

1) 3-pin terminal block (1)

2) 6-pin terminal block (1)

1.2 Key Features

•Brilliant Video Quality

The network camera offers the highly efficient H.264 video compression, which drastically

reduces bandwidth and storage requirements without compromising image quality. Motion

JPEG is also supported for increased flexibility.

•Triple Streams

The network camera can deliver triple video streams simultaneously at full frame rate in all

resolutions up to 1920 x 1080 using Motion JPEG (M-JPEG) and H.264. This means that

several video streams can be configured with different compression formats, resolutions and

frame rates for different needs.

•Image Setting Adjustment

The network camera enables users to adjust image settings such as contrast, brightness and

saturation to improve images before encoding takes place.

•Intelligent Video Capabilities

The network camera includes intelligent capabilities such as enhanced video motion detection.

The network camera’s external inputs and outputs can be connected to devices such as

sensors and relays, enabling the system to react to alarms and activate lights or open/close

doors.

•Improved Security

The network camera logs all user access and lists currently connected users. Also, its full

frame rate video can be provided over HTTPS.

•PoE (Power over Ethernet)

This network camera can be powered through PoE, which simplifies installation, since only

one cable is needed for carrying power as well as video controls.

•ONVIF Certificate

ONVIF is a global interface standard that makes it easier for end users, integrators,

consultants, and manufacturers to take advantage of the possibilities offered by network video

technology. ONVIF enables interoperability between different vendors’ products, providing

increased flexibility, reduced cost, and future-proof systems.

2. Installation

2.1 Installation Details

The dome camera is for use in surface or pendant mounting applications; the mounting location

and material must be capable of supporting loads of up to 4.4 lb (2.0 kg). (Pendent mounting must

use pendent mount accessory.)

The dome camera’s mounting bracket should be attached to a structural object, such as hard wood,

wall stud or ceiling rafter that supports the weight of the dome camera.

CAUTION: A silicone rubber sealant (customer provided) must be applied to seal the

housing to secure waterproofing.

2.1.1 Locking Dome Camera

A. Make screw holes on the ceiling using the supplied mounting Template Sheet (Figure A).

B. Secure the provided Mounting Bracket to the ceiling using supplied Anchors (4x) and

Mounting Screws (4x) (Figure B).

C. Attach the Safety Lanyard to the Safety Lanyard Hook of the Mounting Bracket (Figure C).

D. Align the locking tab on the bracket and the locking slot on the base of the dome (Figure D).

E. Turn the dome counterclockwise approximately 10 degree to the locked position (Figure E).

CAUTION: Before installing the mounting bracket to surface, pre-adjust the four mounting

screws "A" on the base of the dome camera to best match the mounting

bracket locked position. Unscrew the locking screw on the side of the dome's

base and fit the tab of the mounting bracket into the locking slot. Screws "A"

should not be too tight or too loose when the dome is in the locked position.

After setting the proper positions of screws "A," remove the mounting bracket

and install it to the mounting surface. If it is too difficult to lock the dome in

position after the mounting bracket has been installed readjust the screws "A"

by unscrewing them a small amount and try to install dome camera again.

2.2 Basic Configuration of Camera System

No. Connector Wire Color Description

1 3-pin terminal block RED 24 VAC or 12 VDC+

WHITE 24 VAC or 12 VDC-

2 6-pin terminal block

PINK GND

GRAY ALARM INPUT

BROWN GND

YELLOW ALARM OUTPUT

GREEN RS485+

BLUE RS485-

3 RJ-45 BLACK Ethernet, RJ-45 port compatible with

10/100Mbps having PoE functionality.

4 STEREO GRAY AUDIO OUTPUT

5 STEREO BLACK AUDIO INPUT

The camera must be installed by qualified service personnel in accordance with all local and

federal electrical and building codes.

2.3 Connections

•Connecting the Network

Connect a standard RJ-45 cable to the network port of the camera. Generally a cross-over

cable is used for direct connection to a PC, while a direct cable is used for connection to a hub.

•Connecting Alarms

- AI (Alarm Input)

You can use external devices to signal the camera to react upon events. Mechanical or

electrical switches can be wired to the AI (Alarm Input) and G (Ground) connectors.

- G (Ground)

NOTE: All the connectors marked G or GND are common.

Connect the ground side of the alarm input and/or alarm output to the G (Ground) connector.

- AO (Alarm Output)

The camera can activate external devices such as buzzers or lights. Connect the device to

the AO (Alarm Output) and G (Ground) connectors.

•Connecting to the RS485

The camera can be controlled remotely by an external device or control system, such as a

control keyboard, using RS485 half-duplex serial communications signals.

•Connecting the Power

Connect power of 12 VDC or 24 VAC 1.5 A for the camera.

When using a 12 VDC adapter, connect the positive (+) pole to the ‘+’ position and

the negative (-) pole to the ‘-’ position.

Use satisfy clause 2.5 of IEC60950-1/UL60950-1 or Certified/Listed Class 2 power source only.

- Be careful not to reverse the polarity when connecting the power cable.

- A router featuring PoE (Power over Ethernet) can be used to supply power to the camera.

- If PoE and 12 VDC are both applied, this camera will be supplied with power from PoE.

- 24 VAC is recommended to use for the camera power for stable operation with heater kit.

If using PoE, the heater will not operate at all.

2.4 Network Connection & IP assignment

The network camera is designed for use on an Ethernet network and requires an IP address for

access. Most networks today have a DHCP server that automatically assigns IP addresses to

connected devices. By the factory default, your camera is set to obtain the IP address

automatically via DHCP server. If your network does not have a DHCP server the network camera

will use 192.168.1.100 as the default IP address.

If DHCP is enabled and the product cannot be accessed, run the “SmartManager” utility on the CD

to search and allocate an IP address, or reset the product to the factory default settings and then

perform the installation again.

1) Connect the network camera/device to the network and power up.

2) Start SmartManager utility (Start > All programs > SmartManager > SmartManager). The main

window will display, and after a short while any network devices connected to the network will

be displayed in the list.

3) Select the camera on the list and click right button of the mouse. The pop-up menu displays

as below.

4) Select Assign IP Address. The Assign IP window will display. Enter the required IP address.

NOTE: For more information, refer to the SmartManager User’s Manual.

3. Operation

The network camera can be used with Windows® operating system and browsers. The

recommended browsers are Internet Explorer®, Safari®, Firefox®, Opera™ and Google®

Chrome® with Windows.

NOTE: To view streaming video in Microsoft Internet Explorer, set your browser to allow ActiveX

controls.

3.1 Access from a browser

1) Start a browser (ex., Internet Explorer).

2) Enter the IP address or host name of the network camera in the Location/Address field of your

browser.

3) A starting page displays. Click Live View or Setup to enter web page.

4) The network camera’s Live View page appears in your browser.

Otros manuales para Cruiser SN663V

Tabla de contenidos

Otros manuales de Cámara de seguridad de Vicon

Vicon

Vicon Roughneck Pro V2000D Series Manual de usuario

Vicon

Vicon SN240D Manual de usuario

Vicon

Vicon Surveyor MKII Series XX282-40-01 Guía rápida

Vicon

Vicon VC-621 Manual de usuario

Vicon

Vicon SVFT-MSH23C Manual de usuario

Vicon

Vicon V960-N Series Manual de usuario

Vicon

Vicon surveyor1000 Manual del propietario

Vicon

Vicon V992E Manual de usuario

Vicon

Vicon Cruiser SN663V-B-EX Instrucciones de funcionamiento

Vicon

Vicon ROUGHNECK V-CELL-HD-B Manual de usuario

Vicon

Vicon SN688D-WIR Manual de usuario

Vicon

Vicon VC-630 Manual de usuario

Vicon

Vicon Surveyor 99 Manual de usuario

Vicon

Vicon V662-D-2 Instrucciones de funcionamiento

Vicon

Vicon V672V-1 Instrucciones de funcionamiento

Vicon

Vicon Surveyor 282-20-02 Series Manual de usuario

Vicon

Vicon 240-60 Series Manual de usuario

Vicon

Vicon Roughneck Pro V2000 Series Manual de usuario

Vicon

Vicon Roughneck V920D Series Manual

Vicon

Vicon V920B Series Manual de usuario

Vicon

Vicon V988B Manual de usuario

Vicon

Vicon V9360 Manual de usuario

Vicon

Vicon surveyor 1000 Manual de usuario

Vicon

Vicon V992D-IR Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario

Lumens

Lumens VC-A50PNW Manual de usuario