Vicon Surveyor 282-20-02 Series Manual de usuario

ViconNet 8.0 Software

XXYYY-XX-XX

Vicon Industries Inc. does not warrant that the functions contained in this equipment will

meet your requirements or that the operation will be entirely error free or perform

precisely as described in the documentation. This system has not been designed to be

used in life-critical situations and must not be used for this purpose.

Document Number: 8009-8282-20-02 Product specifications subject to change without

Vicon Industries Inc.

Tel: 631-952-2288) Fax: 631-951-2288

Toll Free: 800-645-9116

24-Hour Technical Support: 800-34-VICON

(800-348-4266) UK: 44/(0) 1489-566300

www.vicon-security.com

XX282-20-02

Surveyor® MKII Network Camera Domes

Quick Installation Guide

Quick Operation Guide | 1

Surveyor

MKII Camera Dome

Quick Operation Guide

This manual provides a quick overview for the operation of the Surveyor®

MKII Series of Camera Domes. Refer to the complete manual, XX282-0X

(installation) and XX282-4X (web browser), for complete details on

installation, setup and operating details. These can be found on Vicon’s

website vicon-security.com.

The Surveyor MKII is a compact network dome comprised of a

camera/lens and pan/tilt drive in an attractive covert enclosure. Surveyor

MKII is sold in a variety of prepackaged configurations.

The Surveyor MKII supports high-profile H.264 or M-JPEG compression.

The dome supports ONVIF open architecture connectivity to enable

integration into third party software recording solutions, as well as Vicon’s

Valerus and ViconNet VMS.

The Surveyor MKII is designed for easy installation and serviceability.

The entire drive assembly simply snaps into the housing. When removed,

the mechanism retains all programmed functions in its on-board memory.

The customer interface board snaps down for easy access and the PCB

provides removable terminal blocks for simple wiring connections. Power

to the units can be provided by PoE+ (Power over Ethernet Plus; this

requires use of the midspan injector provided). The Surveyor MKII

includes a high-definition 2.0 megapixel day/night camera with wide

dynamic range (WDR) and digital noise reduction (FNR).

2| Quick Operation Guide

Installation

Outdoor and Impact-Resistant Pendant

The Customer Interface (CI) board is packed separately with the

mechanism. This has to be snapped into the housing.

Install mount or prepare vertical 1-1/2 NPT pipe with

appropriate coupling.

Screw housing clockwise into mount. When snug, turn

an additional quarter turn.

Unlatch the customer interface board and swing it 90

degrees downward, providing access to terminal blocks.

Feed cables through opening.

Remove terminal blocks provided in accessory kit and

terminate wires according to interface wiring diagram

(illustrated below).

Slide any excess cable back up into the mount, leaving

cable length flush with bottom of housing. Install IP

cable and terminal blocks onto customer interface board

and swing up to latch board into place. Make sure there

is no excess wire hanging past the interface board.

Set DIP switches as necessary. Refer to "Setting the DIP

Switches".

Insert the clip on the safety cord into the hole on the

inside of housing. Connect the opposite end of the

safety cord to the tab on the camera drive.

Insert the clip of the safety cord on the lower dome into

the hole in the enclosure. Align the two slots on the

housing with the two tabs on the camera drive. Matching

up the two arrows, slide the camera drive into the

housing until it snaps securely in place.

Align lower dome to housing and fasten with screws

provided.

Quick Operation Guide | 3

Pressurized

The Customer Interface (CI) board is packed separately with the

mechanism. This has to be snapped into the housing.

Connect plastic tube to

pressure sensor.

4| Quick Operation Guide

Wiring and Setup

Communication Ports

If using NTCIP protocol, communicate to the Surveyor MKII using ports

3000/UDP or 3001/TCP.

If using ONVIF, use port 8000. This is set in the web browser.

CONNECTOR/PIN

NUMBER

CONNECTOR TYPE CONNECTOR/PIN LABEL SIGNAL NAME

TERMINAL BLOCK POWER (J2)

J2-1 AC+ Hot

J2-2 AC- Neutral

TERMINAL BLOCK ALARM (J11)

J11-1 ALARM 1 Alarm I/O 1

J11-2 Ground

J11-3 ALARM 2 Alarm I/O 2

J11-4 Ground

J11-5 ALARM 3 Alarm I/O 3

J11-6 Ground

J11-7 ALARM 4 Alarm I/O 4

J11-8 Ground

TERMINAL BLOCK COMM/RELAY (J12)

J12-1 VSS Ground

J12-2 CRelay, common

J12-3 NO Relay, normally open

J12-4 NC Relay, normally closed

RJ-45 LAN (J4)

J4-1 Transmit +

J4-2 Transmit -

J4-3 Receive +

J4-4 PoE spare

J4-5 PoE spare

J4-6 Receive -

J4-7 PoE spare

J4-8 PoE spare

1/8-IN. PHONO AUDIO (J8)

J8 J8 Audio In

Quick Operation Guide | 5

Pressurized Cable Preparation

Be sure to connect the plastic tube to the pressure sensor on the

Customer Interface board.

Using the prefabricated cable.

Using a customer prepared cable

6| Quick Operation Guide

Using the Web Browser Interface

Web Browser Interface

The Web Browser Interface provides a user friendly interface to configure

and control various features and functions of the Surveyor MKII camera

dome. The interface allows the configuration of camera dome

parameters, viewing live video, using PTZ, setting administrative controls

and collecting camera dome reports and status information.

Access the Camera

Make sure the system has installed the player component. Active X

controls are required; be sure the security settings for the IE browser are

set to allow this. Open an Internet Explorer browser; although the dome

can be used with 6.0 or later, Internet Explorer 11 is recommended for

full functionality and required for the single file upgrade function.

Enter the IP address or host name of the camera in the Location/Address

field of your browser. The camera dome defaults to using DHCP.

The Surveyor MKII login screen displays.

Note that the Discovery tool utility for the Surveyor MKII is available on

Vicon’s website, vicon-security.com, under Learn and Support, Software

Downloads. The utility will not be included in the dome’s accessory kit.

Quick Operation Guide | 7

The initial screen prompts the user to login with a user name and

password. Upon first use, the default user name is ADMIN (upper case)

and the password is 1234. It is recommended to modify the password of

the admin user to ensure security of the system.

Click OK to enter the Surveyor MKII browser

After the login process, the Live view page displays. Along the left side

of the screen there is a Navigation panel with tabs for selection of the

other function areas in the Live view, Information, View, Function switch,

PTZ control and PTZ function.

•Information provides date and time details.

•View allows the stream settings, recording and snapshot options

•Function provides, audio, motion detection and privacy mask

features.

•There are PTZ controls. The functions are Zoom In/Out, Focus

Near/Far, Iris Open/Close and Pan and Tilt speed.

8| Quick Operation Guide

The Setting area allows for configuration of a variety of controls.

•The System tab screen provides network, time zone settings and

advanced settings for importing files, setting defaults and reboots.

•The Network screen provides settings for FTP, SMTP, HTTPS,

802.1X, QoS, IGMP, SIP, MDA, DDNS, UPnP and IP filter.

•The Camera screen allows programming Zoom/Iris/Focus, White

balance, Exposure, Day/Night and some Special functions.

•The Video and Audio screen provides settings for the three

streams, Primary, Secondary and MJPEG, for resolution, frame

rate, bit rate, etc.

•From the PTZ screen presets, scans, auto tours, tours, privacy

masks, home, RS-485 and motor controls are set up.

•From the Schedulesscreen, a schedule of events for time of day

and day of week can be set up.

•The Alarm screen allows review and programming of alarms.

There are 4 alarm inputs and 1 alarm output. An alarm schedule

can be set up.

•The Record screen provides the recording parameters for the

primary and secondary streams and playback.

•The Users screen allows the setup of additional users and

changing of passwords. The system supports up to 8 users.

•The Log screen provides up to 30 logs.

VICON INDUSTRIES INC.

For ofce locations, visit the website: www.vicon-security.com

Tabla de contenidos

Otros manuales de Cámara de seguridad de Vicon

Vicon

Vicon V662-D-2 Instrucciones de funcionamiento

Vicon

Vicon Cruiser SN660V Instrucciones de funcionamiento

Vicon

Vicon SVFT-PRS22E Manual de usuario

Vicon

Vicon VC466-DSP Manual de usuario

Vicon

Vicon Surveyor MKII Series XX282-40-01 Guía rápida

Vicon

Vicon Series 234-00-02 Instrucciones de funcionamiento

Vicon

Vicon V940B Manual de usuario

Vicon

Vicon V960D-N312M Manual de instrucciones

Vicon

Vicon V988D Manual de usuario

Vicon

Vicon V672V-1 Instrucciones de funcionamiento

Vicon

Vicon I-Onyx MPD-955DN-O Manual de usuario

Vicon

Vicon roughneck V900 Manual de usuario

Vicon

Vicon Cruiser SN663V-A Manual de usuario

Vicon

Vicon VC-600 Series Manual de usuario

Vicon

Vicon VC-630 Manual de usuario

Vicon

Vicon V661-N-1 Series Instrucciones de funcionamiento

Vicon

Vicon Roughneck V2000D-PTZ Manual de usuario

Vicon

Vicon VN-755IPV5 Manual de usuario

Vicon

Vicon SN688D-WIR Manual de usuario

Vicon

Vicon V920B Series Manual de usuario

Vicon

Vicon V810B Manual de usuario

Vicon

Vicon VC-700W Manual de usuario

Vicon

Vicon V2008-WNL-LPR Manual de usuario

Vicon

Vicon V894MSH Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario

Lumens

Lumens VC-A50PNW Manual de usuario