Viavi SmartPocket OLS-34V2 Manual de usuario
OLS-34V2
OLS-35V2
OLS-36V2
OLS-38V2
SmartPocket™
Optical Laser Sources
Operating Manual
BN 2334/98.11
2021.01
English
Please direct all inquiries to your local Viavi sales company. The
addresses can be found at:
www.viavisolutions.com/en-us/contact-sales-expert
A description of additional instrument features can be found at:
www.viavisolutions.com/en-us/products/network-test-and-certification
Copyrights
This product or parts of this product are based on recommendations
and/or standards from the standardization section of the International
Telecommunication Union – ITU-T and/or the European
Telecommunications Standards Institute – ETSI. These recommendations
and standards are subject to the proprietary rights of these
organizations. It is not permitted to copy ITU-T recommendations or
ETSI standards fully or in part and/or to pass them on to third parties
without prior written permission from ITU-T and/or ETSI.
Copyright
© Copyright 2021 Viavi Solutions Inc. All rights reserved.
Viavi and the Viavi logo are trademarks of Viavi Solutions Inc.
All other trademarks and registered trademarks are the property of their
respective owners.
Viavi Solutions Deutschland GmbH
Arbachtalstraße 5, D-72800 Eningen u. A.
Order number: BN 2334/98.11
Issue: 2021.01
Previous issue: -.-
Notes:
Changes may be made to specifications, designations and delivery
information.
OLS-34V2/-35V2/-36V2/-38V2 3
CONTENTS
CONTENTS
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
OLS-3xV2 Optical Light Sources. . . . . . . . . . . . . . . . . . . . . . . 5
Operating manual update. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Symbols used in this operating manual . . . . . . . . . . . . . . . . 6
SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Warning symbols on the device. . . . . . . . . . . . . . . . . . . . . . . 8
Proper use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Laser safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Battery operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Ventilation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Unpacking the device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Device overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Switching the device on/off . . . . . . . . . . . . . . . . . . . . . . . . . 16
Switching the laser on/off . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Display elements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
The Settings menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Selecting Single-/Multimode (OLS-36 only) . . . . . . . . . . . 18
Selecting a wavelength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Enabling signal modulation . . . . . . . . . . . . . . . . . . . . . . . . . 19
Selecting Auto-Lambda mode . . . . . . . . . . . . . . . . . . . . . . . 19
Selecting Multi-Lambda mode. . . . . . . . . . . . . . . . . . . . . . . 19
DATA EXPORT AND FIRMWARE UPDATE . . . . . . . . . . . . . 20
USB and SmartReporter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Bluetooth® and MobileTech app /
StrataSync cloud (OLP-3x only) . . . . . . . . . . . . . . . . . . . . . . 20
MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Cleaning the test port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Cleaning the instrument . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
4 OLS-34V2/-35V2/-36V2/-38V2
CONTENTS
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
OLS-34 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
OLS-35 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
OLS-36 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
OLS-38 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
General specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
ORDERING INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . 27
Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
OLS-34V2/-35V2/-36V2/-38V2 5
OLS-3XV2 OPTICAL LIGHT SOURCES
1 INTRODUCTION
1INTRODUCTION
OLS-3xV2 Optical Light Sources
The Test Sets are specially designed for high performance testing
of all systems, i.e. broadband, PONs, and Gigabit Ethernet.
Battery operation from two AA batteries and the robust, shock-
proof design provide long operating time in the field even under
tough conditions. AC line operation via a separate AC adapter
and the USB interface ensure ease of use in the laboratory or
production environment.
Differences between the devices
The OLS-3xV2 family covers all the modes, wavelengths and
fiber types needed. The table below lists the differences
between the devices:
Test adapters
The OLS-3xV2 are delivered with SC adapters. Test adapters for
all common connector systems (e.g. FC, ST) can be ordered from
Viavi.
Operating manual update
If the operating instructions about features provided by your
device are missing, please visit the Viavi web site to check if
additional information is available.
To download the latest operating instructions:
1. Visit the Viavi web site at
www.viavisolutions.com
.
2. Search for SmartPocket V2.
3. Open the download area and download the operating
instructions if available.
Model BN... Fiber type Wavelengths Mount type
OLS-34V2 2334/01 MM 9/125 850/1300 nm SC
OLS-35V2 2334/11 SM 9/125 1310/1550 nm SC
OLS-36V2 2334/21 MM 50/125
SM 9/125
850/1300 nm
1310/1550 nm
SC
OLS-38V2 2334/51 SM 9/125 1310/1550/1625 nm SC
6 OLS-34V2/-35V2/-36V2/-38V2
1 INTRODUCTION
SYMBOLS USED IN THIS OPERATING MANUAL
Symbols used in this operating manual
Various elements are used in this operating manual to draw
attention to special meanings or important points in the text.
Symbols and terms used in warnings
The following warnings, symbols and terms are used in this
document in compliance with the American National Standard
ANSI Z535.6-2011:
NOTICE
Follow the instructions carefully to avoid damage to or
destruction of the instrument.
CAUTION
Follow the instructions carefully to avoid a low or medium risk
of injury to persons.
WARNING
Follow the instructions carefully to avoid potential death or
severe injury to persons.
DANGER
Follow the instructions carefully to avoid death or severe
injury to persons.
High Voltage
Follow the instructions carefully to avoid damage to the
instrument or severe injury to persons.
This safety instruction is given if the danger is due to high
voltage.
Laser
Follow the instructions carefully to avoid damage to the
instrument or severe injury to persons.
This safety instruction is given if the danger is due to laser
radiation. Information specifying the laser class is also given.
OLS-34V2/-35V2/-36V2/-38V2 7
SYMBOLS USED IN THIS OPERATING MANUAL
1 INTRODUCTION
Warning format
All warnings have the following format:
The following character formats are used in this operating
manual:
WARNING
Type and source of danger
Consequences of ignoring the warning
JAction needed to avoid danger.
IRequirement
This requirement must be met first; e.g.
IThe system is switched on.
J
1.
2.
Instruction
Follow the instructions given (the numbers indicate the order
in which the instructions should be followed); e.g.
JSelect mode.
Italics
Result
Indicates the result of following an instruction; e.g.
The page opens.
Bold
type face
Pages, controls, and display elements
Screen pages, controls, and display elements are indicated in
bold type.
Text in
blue
Cross references
Cross references are indicated in blue type. When using the
PDF version, just click on the blue text to skip to the cross
reference.
[STORE] Device keys
Device keys are indicated within square brackets.
8 OLS-34V2/-35V2/-36V2/-38V2
2 SAFETY INFORMATION
WARNING SYMBOLS ON THE DEVICE
2SAFETY INFORMATION
Warning symbols on the device
Proper use
This instrument is intended for measurements on optical fiber
devices and systems.
JPlease make sure the device is not operated outside the
permitted conditions or for a purpose other than the one it
was developed for.
JAlways make sure that the device is in good condition before
switching it on.
Warning symbols indicating a potential hazard
JA warning symbol on the device indicates a potential hazard.
In all cases where the a warning symbol is shown on the
display or labeled on the device, the operating manual must
be consulted to learn more about the nature of the potential
hazard and any actions that have to be taken.
OLS-34V2/-35V2/-36V2/-38V2 9
LASER SAFETY
2 SAFETY INFORMATION
Laser safety
Battery operation
WARNING
Dangerous laser radiation
Laser radiation can cause irreparable damage to the eyes
and skin.
This device is a Class 1 laser product according to
DIN EN 60825-1:2014.
Observe the following instructions when working with this
device and laser systems in general:
JConnect all optical fibers before switching on the radiation
source.
JSwitch off the laser source before disconnecting the optical
fibers.
JNever look directly into the output of a laser source or into
an optical fiber connected to it.
JAlways cover unused ports.
JObserve the normal precautions for working with laser
radiation and follow any local regulations.
WARNING
Explosion danger
Short-circuiting the batteries can result in overheating,
explosion or ignition of the batteries and their surround-
ings.
JNever short-circuit the battery contacts by touching both
contacts simultaneously with an electrically conductive
object.
JOnly use AA size dry batteries or rechargeable batteries.
JTake care to insert the batteries correctly.
JNever use batteries based on lithium.
10 OLS-34V2/-35V2/-36V2/-38V2
2 SAFETY INFORMATION
VENTILATION
Ventilation
WARNING
Explosion danger
Dry batteries must not be recharged.
JThe OLS-34V2/-35V2/-36V2/-38V2 does not have a
recharge function for rechargeable batteries, so there is no
danger when using dry batteries.
JRead the manual of the external charging device.
NOTICE
Insufficient ventilation
Insufficient ventilation can damage the instrument or
adversely affect its function and safety.
JEnsure adequate ventilation when operating the instrument.
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
Otros manuales de Instrumento de medición de Viavi
Viavi
Viavi ONX-220 Manual de usuario
Viavi
Viavi CAA06M Manual de usuario
Viavi
Viavi ALT-8000 Manual de usuario
Viavi
Viavi OTDR Series Manual de usuario
Viavi
Viavi FIT-82P01-PRO Manual de usuario
Viavi
Viavi SmartClass Fiber OLS-85 Manual de usuario
Viavi
Viavi FBP-SD4IP-PRO Manual de usuario
Viavi
Viavi FFL-100 Manual de usuario
Viavi
Viavi OneExpert CATV Manual de instrucciones
Viavi
Viavi OneAdvisor ONA-800 Manual de lista de piezas
Viavi
Viavi OneExpert CATV Manual de usuario
Viavi
Viavi G4-PT-040-8T Manual
Viavi
Viavi Seeker X Manual de usuario
Viavi
Viavi CellAdvisor 5G Manual de usuario
Viavi
Viavi SmartPocket OLP-37XV2 Manual de usuario
Viavi
Viavi SmartPocket OLP-35V2 Manual de usuario
Viavi
Viavi MPOL*-85P Manual de usuario
Viavi
Viavi Xgig1000 Instrucciones de instalación
Viavi
Viavi SmartPocket OLP-35SC Manual de usuario
Viavi
Viavi OneExpert ONX CATV 620 Manual de usuario
Manuales populares de Instrumento de medición de otras marcas
Endress+Hauser
Endress+Hauser Proline Promag 50 Especificaciones técnicas
Siemens
Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas
KLINGER
KLINGER CMF V Series Manual de usuario
EXFO
EXFO FTB-2 Manual de operación y mantenimiento
Keysight
Keysight M8290A Manual de usuario
ADTEK
ADTEK MW-5 Manual de usuario