Viavi SmartPocket OLP-35SC Manual de usuario

OLP-35V2

OLP-35SC

OLP-38V2

SmartPocket™

Optical Power Meters

Operating manual

BN 2333/98.11

2021.01

English

5 Commonwealth Ave

Woburn, MA 01801

Phone 781-665-1400

Toll Free 1-800-517-8431

Visit us at www.TestEquipmentDepot.com

Please direct all enquiries to your local Viavi sales company.

The addresses can be found at:

www.viavisolutions.com/en-us/contact-sales-expert

The description of additional features of the device can be found at:

www.viavisolutions.com/en-us/products/network-test-and-certification

Copyrights

This product or parts of this product are based on recommendations

and/or standards from the standardization section of the International

Telecommunication Union – ITU-T and/or the European

Telecommunications Standards Institute – ETSI. These recommendations

and standards are subject to the proprietary rights of these

organizations. It is not permitted to copy ITU-T recommendations or

ETSI standards fully or in part and/or to pass them on to third parties

without prior written permission from ITU-T and/or ETSI.

Viavi and the Viavi logo are trademarks of Viavi Solutions Inc.

All other trademarks and registered trademarks are the property of their

respective owners.

Viavi Solutions Deutschland GmbH

Arbachtalstraße 5, D-72800 Eningen u. A.

Order number: BN 2333/98.11

Issue: 2021.01

Previous issue: -.-

Notes:

Changes may be made to specifications, designations and delivery infor-

mation.

OLP-35V2/-35SC/-38V2 3

CONTENTS

INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

OLP-35V2/-35SC/-38V2

Optical Power Meters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Operating manual update. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Symbols used in this operating manual . . . . . . . . . . . . . . . . 7

SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Warning symbols on the device. . . . . . . . . . . . . . . . . . . . . . . 9

Proper use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Laser safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Battery operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Ventilation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Unpacking the device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Device overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Power Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Switching the device on/off . . . . . . . . . . . . . . . . . . . . . . . . . 17

Display elements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Settings menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Selecting a wavelength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Selecting an operating mode . . . . . . . . . . . . . . . . . . . . . . . . 21

Selecting a display mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Absolute power level mode . . . . . . . . . . . . . . . . . . . . . . . . . 22

Loss mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Pass/Fail mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Displaying modulated signals. . . . . . . . . . . . . . . . . . . . . . . . 24

Enabling Auto-Lambda mode . . . . . . . . . . . . . . . . . . . . . . . 24

Multi-Lambda mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

MEMORY MANAGEMENT . . . . . . . . . . . . . . . . . . . . . . . . 26

General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Storing measurements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Recalling measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Deleting measurements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

4 OLP-35V2/-35SC/-38V2

CONTENTS

DATA EXPORT AND FIRMWARE UPDATE . . . . . . . . . . . . . . 28

USB and SmartReporter . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Bluetooth® and MobileTech app /

StrataSync cloud (OLP-3x only) . . . . . . . . . . . . . . . . . . . . . . 28

MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Cleaning the test port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Cleaning the instrument . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

OLP-35V2/-35SC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

OLP-38V2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

General specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

ORDERING INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . 33

Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

OLP-35V2/-35SC/-38V2 5

OLP-35V2/-35SC/-38V2 OPTICAL POWER METERS

1 INTRODUCTION

1INTRODUCTION

OLP-35V2/-35SC/-38V2

Optical Power Meters

The handheld Optical Power Meters

• OLP-35V2 (BN 2333/12)

• OLP-35SC (BN 2333/13)

• OLP-38V2 (BN 2333/14)

measure power levels on fiber optical systems.

The Test Sets are specially designed for high performance

testing of all optical signals and systems, i.e. broadband, PONs,

and Gigabit Ethernet.

Battery operation from two AA batteries and the robust, shock-

proof design provide long operating time in the field even under

tough conditions. AC line operation via a separate AC adapter

and the USB interface ensure ease of use in the laboratory or

production environment.

Common features

All OLP-3xV2 power meters can connect to single-mode and

multi-mode fibers with a max. core diameter of 50 µm.

Tests on systems from different manufacturers with different

connector types are easy to handle due to the UPP adapter for

1.25 and 2.5 mm ferrules (OLP-35V2/-38V2 only).

A suitable optical source is required for measuring attenuation.

The Viavi OLS-3x and OLS-3xV2 Optical Light Sources are ideal

for this application.

Both modulated and unmodulated light signals can be

measured. The average power of modulated light signals is

displayed.

Modulated signal mode, which uses different fixed frequencies,

can be used to identify fibers in a fiber bundle, for example.

The “Auto-“ function provided by the OLP-3xV2 Optical Power

Meters allows automatic wavelength detection. This application

requires a wavelength encoding light source, e.g. one of the

Viavi OLS-3x or OLS-3xV2 Optical Light Sources.

6 OLP-35V2/-35SC/-38V2

1 INTRODUCTION

OPERATING MANUAL UPDATE

Differences between the models

All the power meters are calibrated at 850 nm, 980 nm, 1310 nm,

1490 nm, 1550 nm, 1577 nm, 1625 nm and 1650 nm. The

differences between the devices are the diode types and the

maximum permitted power levels:

Operating manual update

If the operating instructions about features provided by your

device are missing, please visit the Viavi web site to check if

additional information is available.

To download the latest operating instructions:

1. Visit the Viavi web site at

www.viavisolutions.com

2. Search for SmartPocket V2.

3. Open the download area and download the operating

instructions if available.

Model BN... Diode type Adapter Display

range

OLP-35V2 2333/12 InGaAs UPP +10 dBm

OLP-35SC 2333/13 InGaAs fixed SC +10 dBm

OLP-38V2 2333/14 filtered

InGaAs

UPP +26 dBm

OLP-35V2/-35SC/-38V2 7

SYMBOLS USED IN THIS OPERATING MANUAL

1 INTRODUCTION

Symbols used in this operating manual

Various elements are used in this operating manual to draw

attention to special meanings or important points in the text.

Symbols and terms used in warnings

The following warnings, symbols and terms are used in this

document in compliance with the American National Standard

ANSI Z535.6-2011:

NOTICE

Follow the instructions carefully to avoid damage to or

destruction of the instrument.

CAUTION

Follow the instructions carefully to avoid a low or medium risk

of injury to persons.

WARNING

Follow the instructions carefully to avoid potential death or

severe injury to persons.

DANGER

Follow the instructions carefully to avoid death or severe

injury to persons.

High Voltage

Follow the instructions carefully to avoid damage to the

instrument or severe injury to persons.

This safety instruction is given if the danger is due to high

voltage.

Laser

Follow the instructions carefully to avoid damage to the

instrument or severe injury to persons.

This safety instruction is given if the danger is due to laser

radiation. Information specifying the laser class is also given.

8 OLP-35V2/-35SC/-38V2

1 INTRODUCTION

SYMBOLS USED IN THIS OPERATING MANUAL

Warning format

All warnings have the following format:

The following character formats are used in this operating

manual:

WARNING

Type and source of danger

Consequences of ignoring the warning

JAction needed to avoid danger.

IRequirement

This requirement must be met first; e.g.

IThe device is switched on.

Instruction

Follow the instructions given (the numbers indicate the order

in which the instructions should be followed); e.g.

JSelect mode.

Italics

Result

Indicates the result of following an instruction; e.g.

The page opens.

Bold

type face

Pages, controls, and display elements

Screen pages, controls, and display elements are indicated in

bold type.

Text in

blue

Cross references

Cross references are indicated in blue type. When using the

PDF version, just click on the blue text to skip to the cross

reference.

[MODE] Device keys

Device keys are indicated within square brackets.

OLP-35V2/-35SC/-38V2 9

WARNING SYMBOLS ON THE DEVICE

2 SAFETY INFORMATION

2SAFETY INFORMATION

Warning symbols on the device

Proper use

This instrument is intended for measurements on optical fiber

devices and systems.

JPlease make sure the instrument is not operated outside the

permitted ambient conditions.

JObserve the specified measurement range.

JAlways make sure that the instrument is in proper working

order before switching it on.

Warning symbols indicating a potential hazard

JA warning symbol on the device indicates a potential hazard.

In all cases where the a warning symbol is shown on the

display or labeled on the device, the operating manual must

be consulted to learn more about the nature of the potential

hazard and any actions that have to be taken.

10 OLP-35V2/-35SC/-38V2

2 SAFETY INFORMATION

LASER SAFETY

Laser safety

Battery operation

WARNING

Dangerous laser radiation

Laser radiation can cause irreparable damage to the eyes

and skin.

The maximum permitted power for the OLP-3xV2 means that

the optical input signals can reach Hazard Level 4, depending

on the device type.

Bear this in mind when using the OLP-3xV2.

JAlways be aware of the hazard level of the device to be

connected.

JConnect all optical fibers before switching on the radiation

source.

JSwitch off the laser source before disconnecting the optical

fibers.

JNever look directly into the output of a laser source or into

an optical fiber connected to it.

JAlways cover unused ports.

JHeed the normal precautions for working with laser radiation

and consider local regulations.

WARNING

Explosion danger

Short-circuiting the batteries can result in overheating,

explosion or ignition of the batteries and their surround-

ings.

JNever short-circuit the battery contacts by touching both

contacts simultaneously with an electrically conductive

object.

JOnly use AA size dry batteries or rechargeable batteries.

JTake care to insert the batteries correctly.

JNever use batteries based on lithium.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Instrumento de medición de Viavi

Viavi

Viavi CellAdvisor JD700B Series Manual de usuario

Viavi

Viavi MP-60 Manual de lista de piezas

Viavi

Viavi CAA06M Manual de usuario

Viavi

Viavi OneAdvisor ONA-800 Manual de usuario

Viavi

Viavi ONX-220 Manual de usuario

Viavi

Viavi SmartClass OLP-87 Manual de usuario

Viavi

Viavi WiFi Advisor WFED-300AC Manual de usuario

Viavi

Viavi OneExpert ONX CATV 620 Manual de usuario

Viavi

Viavi Xgig1000 Instrucciones de instalación

Viavi

Viavi G3-GSP-2P100-8TSSD Manual

Viavi

Viavi OneExpert CATV Manual de instrucciones

Viavi

Viavi SmartClass OLT-85 Manual de usuario

Viavi

Viavi SmartPocket OLP-37XV2 Manual de usuario

Viavi

Viavi Xgig Manual de usuario

Viavi

Viavi FBP-SD4IP-PRO Manual de usuario

Viavi

Viavi CAA06M Manual de usuario

Viavi

Viavi SmartClass Fiber OLP-87 NG-PON2 Manual de usuario

Viavi

Viavi SmartClass ORL-85 Manual de usuario

Viavi

Viavi SmartPocket OLS-34V2 Manual de usuario

Viavi

Viavi SmartClass Fiber OLS-85 Manual de usuario

Viavi

Viavi DSP TDR Manual de usuario

Viavi

Viavi FBP-SD4I-PRO Manual de usuario

Viavi

Viavi WiFi Advisor WFED-300AC Manual de usuario

Viavi

Viavi 3550 Manual de lista de piezas

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario