Viavi SmartClass OLP-87 Manual de usuario
OLP-87/OLP-87P
SmartClass™ Fiber
PON Power Meter
Operating manual
BN 2305/98.21
2019.06
English
Please direct all inquiries to your local Viavi sales company. The
addresses can be found at:
www.viavisolutions.com/en-us/contact-sales-expert
A description of additional instrument features can be found at:
www.viavisolutions.com/en-us/products/network-test-and-certification
Notice
Every effort was made to ensure that the information in this document
was accurate at the time of printing. However, information is subject to
change without notice, and Viavi reserves the right to provide an
addendum to this document with information not available at the time
that this document was created.
General Public License
This product includes Qt 4.8.3 software licensed under the GNU LGPL v.
2.1, and barebox 2012.02.0 and linux 3.1.0-rc8 software licensed under
the GNU GPL v. 3. To request a copy of the source code for this software,
please write to:
Open Source Request • Viavi Legal Department •
430 N. McCarthy Blvd. • Milpitas, CA 95035 USA
Copyright
© Copyright 2019 Viavi Solutions Inc. All rights reserved. Viavi and the
Viavi logo are trademarks of Viavi Solutions Inc.
All other trademarks and registered trademarks are the properties of
their respective owners.
Viavi Solutions Deutschland GmbH
Arbachtalstraße 5, D-72800 Eningen u. A.
Order no.: BN 2305/98.21
Version: 2019.06
Previous version: 2019.03
Notes:
Changes may be made to specifications, descriptions and delivery
information.
OLP-87/OLP-87P 3
CONTENTS
CONTENTS
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
OLP-87/OLP-87P power meters. . . . . . . . . . . . . . . . . . . . . . . 6
Operating manual update. . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Symbols used in this operating manual . . . . . . . . . . . . . . . 11
SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Warning symbols on the unit . . . . . . . . . . . . . . . . . . . . . . . . 13
Proper usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Laser safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Battery operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Ventilation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
PS4 Universal AC/DC Power Supply . . . . . . . . . . . . . . . . . . 15
GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Unpacking the instrument. . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Connecting optical cables . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
BASIC OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Switching the instrument on/off . . . . . . . . . . . . . . . . . . . . . 27
Operator control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Menus and display elements . . . . . . . . . . . . . . . . . . . . . . . . 28
Navigating in the menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Displaying application information . . . . . . . . . . . . . . . . . . . 31
Changing System Settings . . . . . . . . . . . . . . . . . . . . . . . . . . 32
WiFi menu (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Bluetooth menu (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Installing a software option . . . . . . . . . . . . . . . . . . . . . . . . . 36
Updating the firmware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Creating screenshots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
MANAGING PROJECTS . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Creating a new project. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Editing a project . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Deleting a project . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Activating a project . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
PONMETER OPERATION . . . . . . . . . . . . . . . . . . . . . . . . 42
Displaying the functional overview . . . . . . . . . . . . . . . . . . . 42
Displaying absolute power level . . . . . . . . . . . . . . . . . . . . . 43
Pass/Fail measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Displaying relative power level. . . . . . . . . . . . . . . . . . . . . . . 47
Saving PONmeter test results. . . . . . . . . . . . . . . . . . . . . . . . 48
4 OLP-87/OLP-87P
CONTENTS
XGPON OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
General information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Select a predefined XGPON view . . . . . . . . . . . . . . . . . . . . 50
Create a self-defined view . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Delete a self-defined view . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Saving XGPON test results . . . . . . . . . . . . . . . . . . . . . . . . . . 51
PROBE/PCM OPERATION . . . . . . . . . . . . . . . . . . . . . . . . 53
General information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Patch Cord Microscope (PCM) . . . . . . . . . . . . . . . . . . . . . . . 53
FMAE series adapters for the PCM . . . . . . . . . . . . . . . . . . . 54
Features available with the P5000i Digital Probe . . . . . . . 54
QuickCapture™ key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
File toolbar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Configuring the Digital Probe . . . . . . . . . . . . . . . . . . . . . . . 57
Saving Probe/PCM results . . . . . . . . . . . . . . . . . . . . . . . . . . 61
BROADBAND OPERATION . . . . . . . . . . . . . . . . . . . . . . . . 63
General information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Setting and selecting wavelengths . . . . . . . . . . . . . . . . . . . 63
Enabling Auto-l mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Selecting and changing the power display mode . . . . . . 67
Displaying relative power level . . . . . . . . . . . . . . . . . . . . . . 68
Saving Broadband test results . . . . . . . . . . . . . . . . . . . . . . . 69
DATA MANAGEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Saving results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Data management of PONmeter, XGPON and Broadband
tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Data management of Probe and PCM tests . . . . . . . . . . . 74
Exporting results to USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Making a report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78
Cleaning the test port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Cleaning the instrument . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
REMOTE CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
ENVIRONMENTAL COMPLIANCE . . . . . . . . . . . . . . . . . . . . 80
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
FTTx specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
General specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
OLP-87/OLP-87P 5
CONTENTS
ORDERING INFORMATION . . . . . . . . . . . . . . . . . . . . . . . 87
OLP-87/OLP-87P stand alone units. . . . . . . . . . . . . . . . . . . 87
Included items. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Software options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Kits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
6 OLP-87/OLP-87P
1 INTRODUCTION
OLP-87/OLP-87P POWER METERS
1INTRODUCTION
OLP-87/OLP-87P power meters
This manual applies to the following models:
The SmartClass™ Fiber OLP-87/87P FTTx/PON power meters are
professional, compact handheld test instruments designed for
qualification, activation, and troubleshooting of B-PON, E-PON,
G-PON, and high-speed networks such as XG-PON and 10GE-
PON networks.
The OLP-87/87P devices combine a high-performance -
selective FTTx/PON power meter, universal broadband power
meter, and automated fiber inspection and test capabilities, thus
providing an optimized feature set for typical workflows found
in access network testing.
Fig. 1 Performing a measurement in a PON network
• BN 2305/01
• BN 2305/21
• BN 2305/26
• BN 2305/11
• BN 2305/31
• BN 2305/36
• BN 2305/66
• BN 2306/36
• BN 2306/66
OLP-87/OLP-87P 7
OLP-87/OLP-87P POWER METERS
1 INTRODUCTION
An integrated pass/fail analysis feature simplifies standard
conformity testing and provides unambiguous measurement
result presentation. With integrated report generation, all
measurement data can be summarized within a professional,
industry standard test report.
Battery operation from AA dry cells or from a rechargeable
Li-Ion Battery Pack ensure long operating time in the field and a
robust, shock-proof design makes the SmartClass™ Fiber
OLP-87/OLP-87P instruments the perfect choice for FTTx/PON
testing, even under tough conditions.
Operation from an AC/DC power supply and remote control
capabilities via USB 2.0 and Ethernet make the SmartClass™
Fiber OLP-87/87P instruments even a perfect solution for fixed
installations in central offices, in production environments, and
on the laboratory workbench.
Common features
All OLP-87/OLP-87P series power meters can connect to single
mode fibers (9/125 µm).
Tests on systems from different manufacturers with different
connector types are easy to handle due to the interchangeable
adapter system.
Differences between the instruments
BN 2305/xy
(partially BN 2306/xy)
01, 21, 26 11, 31, 36 66
Wavelengths
1310 nm III
1490 nm III
1550 nm – II
1270 nm – – I
1578 nm – – I
Selective
measurement
1310 nm – II
1490 nm – II
8 OLP-87/OLP-87P
1 INTRODUCTION
OLP-87/OLP-87P POWER METERS
Please note that the descriptions which follow apply to OLP-87/
OLP-87P/xy as indicated in the table above.
Connector type
The connection is made with a contact type connector. Make
sure that the connectors used are designated
.../PC or …/APC.
1490/1550 nm selective power measurements
All OLP-87/OLP-87P instruments feature a port to which PON
downstream links (from OLT, Optical Line Termination) can be
connected. The signals at wavelengths 1490 nm and 1550 nm
are filtered and measured separately (does not apply to
BN 2305/01, BN 2305/21 and BN 2305/26). This power meter
port is calibrated at the respective center wavelength.
Through path
The through path links the signals from ONT (1310 nm) and OLT
(1490 nm and 1550 nm). Signals are passed through to the
1490/1550 nm port and vice versa. The OLP-87/OLP-87P can be
inserted into the PON network transparently.
Burst power measurements at 1310 nm
The OLP-87/OLP-87P can also be used to measure burst type
signals as found in PON uplink paths at 1310 nm in FTTx mode.
The average burst power is displayed independently from the
burst duty cycle (active/idle). This power meter port is calibrated
at the respective center wavelength.
1550 nm – II
1270 nm – – I
1578 nm – – I
Broadband Power
Meter
II
1) I1)
1) Software option
BN 2305/xy
(partially BN 2306/xy)
01, 21, 26 11, 31, 36 66
OLP-87/OLP-87P 9
OLP-87/OLP-87P POWER METERS
1 INTRODUCTION
Broadband mode
The 1310/1490 nm instruments feature non-selective power
measurements via the OLT port. In this mode, the OLP-87/OLP-
87P FTTx tester behaves like a standard broadband power meter,
e.g. attenuation measurements can be made in the usual way
using a suitable optical source. OLS-85 Optical Light Sources are
ideal for this application.
Both modulated and unmodulated light signals can be
measured. The average power of modulated light signals is
displayed. The broadband power meter is calibrated at 1310 nm,
1490 nm, 1550 nm and 1625 nm. Modulated signal mode, which
uses different fixed frequencies, can be used to identify fibers in
a fiber bundle, for example.
The “Auto-” function allows automatic wavelength detection.
This application requires a wavelength encoding light source,
e.g. one of the OLS-85 Optical Light Sources.
10 OLP-87/OLP-87P
1 INTRODUCTION
OPERATING MANUAL UPDATE
Operating manual update
Continuing enhancement and further development of the
SmartClass™ Fiber family may mean that this operating manual
does not cover all the latest functions of your instrument.
If the operating instructions about features provided by your
instrument are missing, please visit the Viavi web site to check if
additional information is available.
To download the latest user manual:
1. Visit the Viavi web site at http://updatemyunit.net.
2. Select your SmartClass™ Fiber model from the product line.
3. Open the download area and download the latest user
manual.
Otros manuales para SmartClass OLP-87
1
Este manual sirve para los siguientes modelos
10
Tabla de contenidos
Otros manuales de Instrumento de medición de Viavi
Viavi
Viavi FBP-SD4I-PRO Manual de usuario
Viavi
Viavi G3-GSP-8P-8TSSD Manual
Viavi
Viavi OneExpert CATV 630 Manual de usuario
Viavi
Viavi OneExpert CATV Manual de usuario
Viavi
Viavi SmartPocket OLP-35SC Manual de usuario
Viavi
Viavi SmartPocket OLP-35V2 Manual de usuario
Viavi
Viavi MP-60 Manual de lista de piezas
Viavi
Viavi SmartClass OLP-87 Manual de lista de piezas
Viavi
Viavi FFL-100 Manual de usuario
Viavi
Viavi Xgig1000 Instrucciones de instalación
Viavi
Viavi VSE-1100 Manual de usuario
Viavi
Viavi WiFi Advisor WFED-300AC Manual de usuario
Viavi
Viavi SmartClass Fiber OLP-87 NG-PON2 Manual de usuario
Viavi
Viavi ALT-8000 Manual de lista de piezas
Viavi
Viavi G4-PT-040-8T Manual
Viavi
Viavi CAA06M Manual de usuario
Viavi
Viavi WiFi Advisor WFED-300AC Manual de usuario
Viavi
Viavi CellAdvisor JD700B Series Manual de usuario
Viavi
Viavi CellAdvisor 5G Manual de usuario
Viavi
Viavi MPOL*-85P Manual de usuario
Manuales populares de Instrumento de medición de otras marcas
Endress+Hauser
Endress+Hauser Proline Promag 50 Especificaciones técnicas
Siemens
Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas
KLINGER
KLINGER CMF V Series Manual de usuario
EXFO
EXFO FTB-2 Manual de operación y mantenimiento
Keysight
Keysight M8290A Manual de usuario
ADTEK
ADTEK MW-5 Manual de usuario