Viavi SmartPocket OLP-37X2 Manual de usuario

OLP-37XV2

SmartPocket™ V2

Optical Power Meters

User manual

BN 2335/98.11

2021.07

English

Please direct all enquiries to your local Viavi sales company.

The addresses can be found at:

www.viavisolutions.com/en-us/contact-sales-expert

The description of additional features of the device can be found at:

www.viavisolutions.com/en-us/products/network-test-and-certification

Copyrights

This product or parts of this product are based on recommendations

and/or standards from the standardization section of the International

Telecommunication Union – ITU-T and/or the European

Telecommunications Standards Institute – ETSI. These recommendations

and standards are subject to the proprietary rights of these

organizations. It is not permitted to copy ITU-T recommendations or

ETSI standards fully or in part and/or to pass them on to third parties

without prior written permission from ITU-T and/or ETSI.

Viavi and the Viavi logo are trademarks of Viavi Solutions Inc.

All other trademarks and registered trademarks are the property of their

respective owners.

Viavi Solutions Deutschland GmbH

Arbachtalstraße 5, D-72800 Eningen u. A.

Order number: BN 2335/98.11

Issue: 2021.07

Previous issue: 2021.04

Notes:

Changes may be made to specifications, designations and delivery infor-

mation.

OLP-37XV2 3

CONTENTS

INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

OLP-37XV2 Optical Power Meter. . . . . . . . . . . . . . . . . . . . . . 5

User manual update. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Symbols used in this user manual . . . . . . . . . . . . . . . . . . . . . 7

SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Unpacking the device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Device overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Power Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Switching the device on/off . . . . . . . . . . . . . . . . . . . . . . . . . 15

Display elements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Settings menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Selecting a operation mode . . . . . . . . . . . . . . . . . . . . . . . . . 18

Selecting a display mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Absolute power level mode . . . . . . . . . . . . . . . . . . . . . . . . . 19

Loss mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Pass/Fail mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

MEMORY MANAGEMENT . . . . . . . . . . . . . . . . . . . . . . . . 22

General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Storing measurements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Recalling measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Deleting measurements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

DATA EXPORT AND FIRMWARE UPDATE . . . . . . . . . . . . . 24

USB and SmartReporter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Bluetooth® and MobileTech app /

StrataSync cloud . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Cleaning the test port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Cleaning the instrument . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

OLP-37XV2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

General specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

4 OLP-37XV2

CONTENTS

ORDERING INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . 29

Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

PRODUCT REGULATORY COMPLIANCE . . . . . . . . . . . . . . . 30

OLP-37XV2 5

OLP-37XV2 OPTICAL POWER METER

1 INTRODUCTION

1INTRODUCTION

OLP-37XV2 Optical Power Meter

The OLP-37XV2 is a specialized optical power meter designed

for use cases such as system/network qualification, subscriber

activation, and troubleshooting of passive optical network

(PON).

The instrument performs wavelength selective optical power

measurements suitable for testing G-PON networks, as defined

in ITU-T G.983/4 or IEEE 802.3ah and XGS-PON networks, as

defined in ITU-T G.9807.1 respectively.

An integrated pass/fail analysis feature simplifies standard

conformity and optical budget/margin testing, and provides

unambiguous measurement result presentation.

With PC-based reporting, all test results can be summarized in a

professional, industry-proven report.

Main features

The OLP-37XV2 offers many helpful features that are optimized

to workflows of typical telecom and cable TV operators, and thus

ensure that test times are kept as short as possible.

• Accurate and repeatable wavelength selective power

measurements

• Unambiguous pass/fail result presentation and user definable

pass/fail thresholds

• Data storage for up to 1000 measurements

• USB-C interface for measurement data transfer to a laptop or

• Easy operation and instantly ready to operate

• Versatile power supply options using dry or rechargeable

batteries or via the USB-C interface

• Automatic power-off (can be disabled)

• Color-coded test head cover for easy distinction between APC

and PC connector types

• Display of G-PON and XGS-PON signals simultaneously

• Smart-Reporter PC software for data management and report

generation

6 OLP-37XV2

1 INTRODUCTION

USER MANUAL UPDATE

User manual update

If the operating instructions about features provided by your

device are missing, please visit the Viavi web site to check if

additional information is available.

To download the latest operating instructions:

1. Visit the Viavi web site at www.viavisolutions.com.

2. Search for SmartPocket V2.

3. Open the download area and download the operating

instructions if available.

OLP-37XV2 7

SYMBOLS USED IN THIS USER MANUAL

1 INTRODUCTION

Symbols used in this user manual

Various elements are used in this user manual to draw attention

to special meanings or important points in the text.

Symbols and terms used in warnings

The following warnings, symbols and terms are used in this

document in compliance with the American National Standard

ANSI Z535.6-2011:

NOTICE

Follow the instructions carefully to avoid damage to or

destruction of the instrument.

CAUTION

Follow the instructions carefully to avoid a low or medium risk

of injury to persons.

WARNING

Follow the instructions carefully to avoid potential death or

severe injur y to persons.

DANGER

Follow the instructions carefully to avoid death or severe

injury to persons.

High Voltage

Follow the instructions carefully to avoid damage to the

instrument or severe injury to persons.

This safety instruction is given if the danger is due to high

voltage.

Laser

Follow the instructions carefully to avoid damage to the

instrument or severe injury to persons.

This safety instruction is given if the danger is due to laser

radiation. Information specifying the laser class is also given.

8 OLP-37XV2

1 INTRODUCTION

SYMBOLS USED IN THIS USER MANUAL

Warning format

All warnings have the following format:

The following character formats are used in this user manual:

WARNING

Type and source of danger

Consequences of ignoring the warning

JAction needed to avoid danger.

IRequirement

This requirement must be met first; e.g.

IThe device is switched on.

Instruction

Follow the instructions given (the numbers indicate the order

in which the instructions should be followed); e.g.

JSelect mode.

Italics

Result

Indicates the result of following an instruction; e.g.

The page opens.

Bold

type face

Pages, controls, and display elements

Screen pages, controls, and display elements are indicated in

bold type.

Text in

blue

Cross references

Cross references are indicated in blue type. When using the

PDF version, just click on the blue text to skip to the cross

reference.

[MODE] Device keys

Device keys are indicated within square brackets.

OLP-37XV2 9

SYMBOLS USED IN THIS USER MANUAL

2 SAFETY INFORMATION

2SAFETY INFORMATION

JAll safety information for your device can be found in the

printed booklett “ Safety, Disposal and Environmental

Protection“ provided with your device.

JCarefully read and follow all instructions given there.

JThe booklett “Safety, Disposal and Environmental

Protection“ is attached to this pdf. You can open it from

the attachment window or by clicking the thumbnail on

the left.

10 OLP-37XV2

3 GETTING STARTED

UNPACKING THE DEVICE

3GETTING STARTED

Unpacking the device

Packing material

We suggest that you keep the original packing material. It is

designed for reuse (unless it is damaged during shipping). Using

the original packing material ensures that the device is properly

protected during shipping.

Checking the package contents

Your device is shipped with the following accessories:

• 2.5 mm universal adapter

• 2 dry batteries AA

• User manual

• Belt bag

Checking for shipping damage

After you unpack the device, check to see if it has been damaged

during shipping. This is particularly likely if the packaging is

visibly damaged. If there is damage, do not attempt to operate

the device. Doing so can cause further damage. In case of

damage, please contact your local Viavi Sales Company.

Addresses can be found at www.viavisolutions.com.

Recovery following storage/shipping

Condensation can occur if a device that is stored or shipped at a

low temperature is brought into a warm environment. To

prevent damage, wait until no more condensation is visible on

the surface of the device before powering it up. Do not operate

the instrument until it has reached its specified temperature

range and wait until it has cooled down if the instrument was

stored at a high temperature (see “Environmental conditions” on

page 28).

Tabla de contenidos

Otros manuales de Instrumento de medición de Viavi

Viavi

Viavi G3-GSP-8P-8TSSD Manual

Viavi

Viavi SmartClass Fiber OLP-87 NG-PON2 Manual de usuario

Viavi

Viavi MPOL*-85P Manual de usuario

Viavi

Viavi E4123MM Manual de usuario

Viavi

Viavi Observer GigaStor GS-4P-16T Manual

Viavi

Viavi VSE-1100 Manual de usuario

Viavi

Viavi SmartPocket OLP-35SC Manual de usuario

Viavi

Viavi T-BERD MTS 5800 Manual de lista de piezas

Viavi

Viavi Xgig Manual de usuario

Viavi

Viavi FBP-SD4IP-PRO Manual de usuario

Viavi

Viavi FiberChek Sidewinder Manual de usuario

Viavi

Viavi Xgig1000 Instrucciones de instalación

Viavi

Viavi OLS-34 Manual de usuario

Viavi

Viavi T-BERD 6000A V2 Manual de lista de piezas

Viavi

Viavi SmartPocket OLP-35V2 Manual de usuario

Viavi

Viavi WiFi Advisor WFED-300AC Manual de usuario

Viavi

Viavi OTDR Series Manual de usuario

Viavi

Viavi G4-PT-040-8T Manual

Viavi

Viavi OneExpert CATV 630 Manual de usuario

Viavi

Viavi SmartClass OLP-87 Manual de lista de piezas

Viavi

Viavi Seeker X Manual de usuario

Viavi

Viavi CellAdvisor 5G Manual de usuario

Viavi

Viavi OneAdvisor ONA-800 Manual de usuario

Viavi

Viavi ONX-220 Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario