VeriFone MX800 Series Manual de usuario
One Blue Hill Plaza, 16th Floor, PO Box 1546
Pearl River, NY 10965
1-800-PC-AMERICA, 1-800-722-6374
(Voice) 845-920-0800 (Fax) 845-920-0880
1 | P a g e
Verifone MX800 Series
Pinpad Serial Installation
Note: No drivers are required for the installation via serial.
Following this document requires that Cash Register Express and/or Restaurant Pro Express is running
CRE Database Version 12.6036 or above.
2 | P a g e
Installing and Configuring the Verifone MX800 Series Pinpads via Serial
When using the pinpad via serial the following will need to be done:
Checking the Correct COM Port Settings
Entering the Configuration Menu
Checking the Correct Interface Settings on the Pinpad
Enabling the Firmware Update Download on the PinPad and Beginning the Download in
CRE/RPE
Installing Pinpad Firmware and Software
oRFS017
o017_01
o17.1.B
o1.4
Restarting the Device
Other Configuration Options in CRE/RPE
Other Required Pinpad Configuration
Using the MX800 Series Pinpads
3 | P a g e
Checking the Correct COM Port Settings
In Windows XP:
1. Select Start.
2. Select Run and type in cmd. This will open the
command prompt.
In Windows 7:
1. Select Start.
2. Type in cmd. Then select cmd.exe, this will open the
command prompt.
3. At the command prompt type in: mode com1 then hit Enter.
4. You should get a message that gives information (pictured above) that shows the device is communicating with the
computer.
Note: If at the command prompt nothing is shown when typing mode com1you can type mode com2 then mode com3
etc…. you will want to continue until something is displayed. The com number that displays information (see above) will
be needed later during the setup and configuration process.
4 | P a g e
Entering the Configuration Menu
In order to use the MX800 series via Serial the device must be configured correctly through the
configuration menu.
1. When you turn on the MX800 Series Pinpad you
may see either the FORMAGENT –USB (pictured
top left) or the pcAmerica Logo’s (pictured bottom
left) this is where we can begin to access the
configuration menu.
Note: If neither of the screens (pictured left) are being
displayed then the device has no information loaded
on it. This is sometimes the case when a new device is
shipped.
5 | P a g e
2. Using a narrow tool such as a paperclip press the
button in the hole to reset the device, it may take
a minute or so.
3. After some time with the device configuring you
should see a screen (pictured left) asking for a
password.
Default password: 166831
Note: If the above password does not work then you
can also try: 166832
4. This will display the System Mode, which is where
all the settings for the MX800 series pinpads are
checked and set.
6 | P a g e
Checking the Correct Interface Settings on the Pinpad
1. At the System Mode screen select CONFIGURE.
2. The Configure (1) screen is where you will set how
the device integrates with the computer.
3. Select USB PORT.
4. At the USB configuration select Disabled.
5. Select the Left Arrow to go back to the
CONFIGURE (1).
7 | P a g e
6. You will want to check and make sure that the
Ethernet configuration is disabled.
7. Select ETHERNET PORT.
8. Check DISABLE.
9. Select the Left Arrow to go back to the
CONFIGURE (1). Select the Left Arrow once again
to go back to the System Mode screen.
8 | P a g e
Enabling the Firmware Update Download on the PinPad and Beginning the Download in CRE/RPE
1. At the System Mode screen select FILE TRANSFER.
2. At the File Transfer screen select DOWNLOAD.
3. While on the Configure Direct Download screen
select the Port that the PinPad is connected to
(Note: If using a serial cable to perform the update,
the COM port will be COM3).
4. Under Baud Rate? Leave as the default (115200).
5. Under Download Type?:
If either the OS (Step 1*) or PCA (Steps 4 & 5*)
update is being performed select Full.
If either the SP (Step 2*) or SP (Step 3*) update
is being performed select Partial.
* From the Grid on Page 12
6. Select GO! To begin the file transfer.
9 | P a g e
7. You will then see Waiting for Server on the PinPad
screen.
8. Open CRE/RPE and select Manager. Provide the
requested credentials and then follow these steps.
9. Select Setup and then select Setup Screen.
10. Select the Hardware tab and then select Page 1.
11. Select the Hardware tab and choose the correct
com port for the PinPad Port (e.g. COM1).
12. Select the correct pinpad that you are connecting
for the PinPad Type (e.g. VerifoneMX850).
13. Select Serial for the PinPad Connection.
14. Select Update and then re-enter the setup screen.
10 | P a g e
15. Select the Hardware tab and then select Page 1.
16. Select Upgrade PinPad.
17. You should automatically be brought to the Alt.
Software Update tab, if not then select it.
18. Using the information from the Grid on below,
please start by installing Step 1 and then install
everything through to Step 5.
19. The following will need to be done for each
installation on the pinpad that will be performed:
Under Port Name on the Pinpad select COM3.
Under Baud Rate select the default (115200).
Select Perform to begin the upgrade.
Step
Type
Version
Download type on pin pad
Remarks
1
OS
RFS017
Full
Pin pad will automatically restart after
download
2
SP
017_01
Partial
Pin pad will automatically restart after
download
3
SP
17.1.B
Partial
Pin pad will automatically restart after
download
4
PCA
1.4
Full
Must manually restart pin pad after
download
Otros manuales para MX800 Series
7
Otros manuales de Terminal táctil de VeriFone
VeriFone
VeriFone Omni 3730 Manual de usuario
VeriFone
VeriFone Vx-520 Series APACS 40 Manual de usuario
VeriFone
VeriFone NURIT 8000 Manual de usuario
VeriFone
VeriFone Vx680 BT Series Manual de usuario
VeriFone
VeriFone P630 Manual de usuario
VeriFone
VeriFone Nurit 2085 Manual de usuario
VeriFone
VeriFone V400m Guía de referencia
VeriFone
VeriFone C680 3G Manual de usuario
VeriFone
VeriFone M440 Manual de usuario
VeriFone
VeriFone DUET Vx810 Manual de usuario
VeriFone
VeriFone VX 680 Series Manual de usuario
VeriFone
VeriFone Tranz 330 Manual de usuario
VeriFone
VeriFone evolution series Manual de usuario
VeriFone
VeriFone Indoor VeriPASS Manual de usuario
VeriFone
VeriFone e265G Manual de usuario
VeriFone
VeriFone MX800 Series Manual de usuario
VeriFone
VeriFone V200c Manual de usuario
VeriFone
VeriFone VX 520-G Manual de usuario
VeriFone
VeriFone C18 Manual
VeriFone
VeriFone VX 520 Series Manual de usuario
