Vaisala HMD62 Manual de usuario

M212016EN-A

User Guide

HMD60 Series Humidity and Temperature

Transmitters for Ducts in HVAC

HMD62 TMD62

PUBLISHED BY

Vaisala Oyj

Vanha Nurmijärventie 21, FI-01670 Vantaa, Finland

P.O. Box 26, FI-00421 Helsinki, Finland

+358 9 8949 1

Visit our Internet pages at www.vaisala.com.

No part of this manual may be

reproduced, published or publicly

displayed in any form or by any

means, electronic or mechanical

(including photocopying), nor

may its contents be modiﬁed,

translated, adapted, sold or

disclosed to a third party without

prior written permission of the

manuals and translated portions

of multilingual documents are

based on the original English

versions. In ambiguous cases, the

English versions are applicable,

not the translations.

The contents of this manual are

subject to change without prior

notice.

Local rules and regulations may

vary and they shall take

precedence over the information

contained in this manual. Vaisala

makes no representations on this

manual’s compliance with the

local rules and regulations

applicable at any given time, and

hereby disclaims any and all

responsibilities related thereto.

This manual does not create any

legally binding obligations for

Vaisala towards customers or end

users. All legally binding

obligations and agreements are

included exclusively in the

applicable supply contract or the

General Conditions of Sale and

General Conditions of Service of

Vaisala.

This product contains software

developed by Vaisala or third

parties. Use of the software is

governed by license terms and

conditions included in the

applicable supply contract or, in

the absence of separate license

terms and conditions, by the

General License Conditions of

Vaisala Group.

This product may contain open

source software (OSS)

components. In the event this

product contains OSS

components, then such OSS is

governed by the terms and

conditions of the applicable OSS

licenses, and you are bound by

the terms and conditions of such

licenses in connection with your

use and distribution of the OSS in

this product. Applicable OSS

licenses are included in the

product itself or provided to you

on any other applicable media,

depending on each individual

product and the product items

delivered to you.

Table of Contents

1. About This Document................................................................................... 3

1.1 Version Information.......................................................................................... 3

1.2 Related Manuals................................................................................................ 3

1.3 Documentation Conventions...........................................................................3

1.4 Trademarks........................................................................................................ 4

2. Product Overview........................................................................................... 5

2.1 Introduction to HMD60 Series.........................................................................5

2.2 HMD60 Series Basic Features and Options................................................... 5

2.3 Available Parameters and Default Scaling.....................................................5

2.4 Connectivity to Vaisala Insight Software....................................................... 6

2.5 HMD60 Transmitter Parts.................................................................................7

2.5.1 Cable Gland and Conduit Options...........................................................8

2.5.2 Filter Options..............................................................................................8

2.5.3 Transmitter Board......................................................................................9

2.5.4 Trimmers................................................................................................... 10

2.5.5 DIP Switch Output Selection (HMD62)...................................................11

2.6 Filtering Factor.................................................................................................12

2.7 Environmental Compensation (HMD62).......................................................12

3. Installation........................................................................................................ 13

3.1 HMD60 Dimensions.........................................................................................13

3.2 Duct Mounting Overview................................................................................14

3.3 Installing into Duct.......................................................................................... 15

3.4 Wiring............................................................................................................... 16

4. Calibration and Adjustment...................................................................... 18

4.1 Calibration and Adjustment Overview..........................................................18

4.2 Calibration and Adjustment Using Trimmers...............................................18

4.2.1 1-Point Adjustment Using Trimmers and Reference Calibrator..........19

4.2.2 Adjusting Output Using Trimmers and Reference

Transmitter (1-point adjustment)........................................................... 19

4.2.3 Resetting Trimmers Back to Zero......................................................... 20

4.3 Calibration and Adjustment with Insight PC Software............................... 21

4.3.1 2-Point Adjustment with Insight and Reference Calibrator...............22

4.3.2 1-Point Adjustment with Insight and Reference Transmitter............. 23

4.4 Calibration and Adjustment with MI70 Hand-Held Indicator................... 24

4.4.1 1-Point Adjustment Using Reference Environment.............................24

5. Operating with Insight PC Software..................................................... 27

5.1 Vaisala Insight Software.................................................................................27

5.2 Connecting to Insight Software.................................................................... 27

5.3 Insight Main View............................................................................................28

5.3.1 Basic and Advanced User Modes.......................................................... 28

Table of Contents

5.4 Conﬁguring Analog Outputs with Insight................................................... 29

5.4.1 Testing and Adjusting Analog Output Current (mA) Level............... 30

5.5 Conﬁguring Minimum and Maximum RH and T Errors with Insight..........31

5.6 Changing Pressure Compensation Settings with Insight (HMD62)......... 33

5.7 Setting Filtering Factor with Insight............................................................ 34

6. Operating with MI70 Indicator................................................................35

6.1 Overview of MI70 Support............................................................................ 35

6.1.1 MI70 Indicator Parts................................................................................35

6.2 Connecting HMD60 to MI70 Indicator.........................................................36

6.3 Basic Display................................................................................................... 37

6.4 Graphical Display............................................................................................ 37

6.5 Main Menu....................................................................................................... 38

6.6 Holding and Saving the Display....................................................................38

6.7 Recording Data...............................................................................................39

7. Maintenance and Troubleshooting....................................................... 40

7.1 Cleaning.......................................................................................................... 40

8. Technical Data.................................................................................................41

8.1 Speciﬁcations...................................................................................................41

8.2 HMD60 Dimensions....................................................................................... 44

8.3 Spare Parts and Accessories.........................................................................45

Warranty....................................................................................................................... 47

Technical Support..................................................................................................... 47

Recycling...................................................................................................................... 47

HMD62 TMD62 User Guide M212016EN-A

1. About This Document

1.1 Version Information

Table 1 Document versions

Document Code Date Description

M212016EN-A September 2018 This manual. First version of the document.

1.2 Related Manuals

Table 2 Related Manuals

Document Code Description

M212049EN HMD60 Series Humidity and Temperature Transmitters for Ducts in

HVAC HMD62 and TMD62 Quick Guide

1.3 Documentation Conventions

alerts you to a serious hazard. If you do not read and follow

instructions carefully at this point, there is a risk of injury or even death.

WARNING!

warns you of a potential hazard. If you do not read and follow

instructions carefully at this point, the product could be damaged or important

data could be lost.

CAUTION!

Note highlights important information on using the product.

Tip gives information for using the product more eciently.

Chapter 1 – About This Document

1.4 Trademarks

Vaisalaâand HUMICAPâare registered trademarks of Vaisala Oyj.

Windowsâis either a registered trademark or trademark of Microsoft Corporation in the

United States and other countries.

All other product or company names that may be mentioned in this publication are trade

names, trademarks, or registered trademarks of their respective owners.

HMD62 TMD62 User Guide M212016EN-A

2. Product Overview

2.1 Introduction to HMD60 Series

The duct mounted HMD60 HUMICAPâHumidity and Temperature Transmitters are designed

for monitoring humidity and temperature in demanding HVAC and light industrial applications.

HMD60 series transmitters provide stable, reliable, and highly accurate (up to ±1.5 %RH and

±0.1 °C (0.18 °F) measurements, and are resistant to chemicals and dust.

HMD60 series transmitter options include two analog output models: HMD62 for measuring

both humidity and temperature, and TMD62 for temperature measurements. Both HMD62 and

TMD62 use 4 ... 20 mA loop powered current output.

Thanks to easy access to electronics also when the transmitter is installed to a duct,

conﬁguration and adjustment can be carried out quickly and conveniently. Available

conﬁguration and adjustment interface options range from physical trimmers and DIP switches

on the transmitter's circuit board to Vaisala Insight PC software for Windowsâ.

2.2 HMD60 Series Basic Features and Options

• Two analog transmitter model options:

• HMD62 for humidity and temperature measurement

• TMD62 for temperature measurement

• Humidity parameters available as output options in HMD62: RH, Td, Tdf, A, X, Tw, H

• Default temperature analog output scale: -20 … +80 °C (-4 … +176 °C)

• Analog output: 4 ... 20 mA, loop powered

• HMD62: 2 analog output channels for humidity and temperature measurements

• TMD62: 1 analog output channel for temperature measurement

• Power supply input: 10 ... 35 VDC / 20 ... 35 VDC

•Conﬁguration and adjustment options:

• RH and T measurement ﬁeld adjustment with trimmers

• Humidity output parameter selection with DIP switches (HMD62)

• Field adjustment with MI70 hand-held indicator

•Conﬁguration and adjustment with Vaisala Insight PC software

2.3 Available Parameters and Default Scaling

HMD62 Measurement Parameters and Default Analog Output

Scaling

Table 3 (page 6) shows the available output parameters and the default analog output

scaling of the parameters for HMD62.

Chapter 2 – Product Overview

Table 3 HMD62 Measurement Parameters and Default Scaling

Parameter Default Scaling for 4 … 20 mA Output Range

Relative humidity (RH) 0 … 100 %RH

Dew point temperature (Td) -40 ... +80 °C (-40 ... +176 °F)

Dew point/frost point

temperature (Tdf)

-40 ... +80 °C (-40 ... +176 °F)

Absolute humidity (A) 0 … 300 g/m3(0 … 131.1 gr/ft3)

Mixing ratio (X) 0 … 600 g/kg (0 … 4200 gr/lb)

Wet-bulb temperature (Tw) -40 ... +80 °C (-40 ... +176 °F)

Enthalpy (H) -40 … 1600 kJ/kg (-9.5 ... 695.6 Btu/lb)

TMD62 Measurement Parameters and Default Analog Output

Scaling

Table 4 (page 6) shows the available output parameters and the default analog output

scaling of the parameters for TMD62.

Table 4 TMD62 Measurement Parameters and Default Scaling

Parameter Default Scaling for 4 … 20 mA Output Range

T -20 ... +80 °C (-4 ... +176 °F)

Changing Measurement Parameter Scaling

If your application requires an analog output scaling that diers from the defaults shown in

Table 3 (page 6) and Table 4 (page 6), you can conﬁgure the scaling by connecting the

transmitter to Vaisala Insight PC software (requires Vaisala USB cable 219690).

2.4 Connectivity to Vaisala Insight Software

The transmitter can be connected to Vaisala Insight software using a Vaisala USB cable (order

code 219690). With the Insight software, you can:

• Calibrate and adjust the measurement.

• See device information and status.

• See real-time measurement.

•Conﬁgure output parameters and scaling.

More Information

‣Connecting to Insight Software (page 27)

HMD62 TMD62 User Guide M212016EN-A

2.5 HMD60 Transmitter Parts

Figure 1 HMD62 and TMD62 Transmitter Parts Overview

1Captive screw (2 pcs, cross-head) for attaching the lid of the transmitter.

2Screw (2 pcs) for mounting the transmitter on the installation surface.

3Transmitter lid. Open the captive screws of the lid to access input and output electronics.

4Transmitter base. Contains the input and output connectors on the transmitter board.

5Cable gland (M16 x 1.5 inlet) for leading wires into the transmitter.

6Alternative inlet (M20 x 1.5) for wiring.

7Probe body (250 mm (9.84 in) with ﬁlter).

8Probe ﬁlter (default option: AISI 316L stainless steel).

9HUMICAPâsensor inside the probe ﬁlter.

Do not touch the sensor element.CAUTION!

Chapter 2 – Product Overview

2.5.1 Cable Gland and Conduit Options

HMD60 has 2 inlets (M16x1.5 and M20x1.5) that can be used with a variety of cable gland and

conduit options. Figure 2 (page 8) shows the cable gland and conduit options available

from Vaisala.

Figure 2 HMD60 Cable Gland and Conduit

Options

1Cable Gland and O-ring M16 x 1.5

(Vaisala order code: 254280SP). This is

the default option delivered with

HMD60.

2Conduit ﬁtting and O-ring (M16x1.5 /

NPT1/2") (Vaisala order code:

210675SP).

2.5.2 Filter Options

Figure 3 (page 8) shows the ﬁlter options available for HMD60.

1 2

Figure 3 HMD60 Filter Options

1Metal Grid with PTFE Membrane (Vaisala order code ASM212652SP). This is the default

option delivered with HMD60.

2Sintered Filter (Vaisala order code HM46670SP).

HMD62 TMD62 User Guide M212016EN-A

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Transmisor de Vaisala

Vaisala

Vaisala WXT510 Manual de usuario

Vaisala

Vaisala Indigo 201 Manual de usuario

Vaisala

Vaisala Humicap HMD60U Manual de usuario

Vaisala

Vaisala WXT536 Manual de usuario

Vaisala

Vaisala PDT101 Manual de usuario

Vaisala

Vaisala Drycap DMT152 Manual de usuario

Vaisala

Vaisala Indigo 202 Manual de usuario

Vaisala

Vaisala HUMICAP HMT360 SERIES Manual de usuario

Vaisala

Vaisala HUMICAP HMT130 Manual de usuario

Vaisala

Vaisala INTERCAP HMDW80 SERIES Manual de usuario

Vaisala

Vaisala DRYCAP DMT340 SERIES Manual de usuario

Vaisala

Vaisala DMP248 Manual de usuario

Vaisala

Vaisala Humicap HMD60Y Manual de usuario

Vaisala

Vaisala INTERCAP HMDW80 SERIES Manual de usuario

Vaisala

Vaisala HUMICAP HMT120 Series Manual de usuario

Vaisala

Vaisala DPT145 Manual de usuario

Vaisala

Vaisala CARBOCAP GMW80 Series Manual de usuario

Vaisala

Vaisala HUMICAP HMT140 Manual de usuario

Vaisala

Vaisala DMP248 Guía rápida

Vaisala

Vaisala AQT530 Manual de usuario

Vaisala

Vaisala PDT101 Manual de usuario

Vaisala

Vaisala Humicap HMD60Y Manual de usuario

Vaisala

Vaisala HUMICAP HMD70U Manual de usuario

Vaisala

Vaisala Indigo200 Manual de usuario

Manuales populares de Transmisor de otras marcas

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manual del propietario

Honeywell

Honeywell 5816WMBR Manual de usuario

Kamstrup

Kamstrup READy MTU Instrucciones de funcionamiento

Omega

Omega ZW Series Manual de usuario

ABB

ABB Field 264H Guía

Alinco

Alinco DJ-V17T Manual de usuario

Dejero

Dejero EnGo 3x Manual de usuario

Rosemount

Rosemount 4600 Manual de usuario

Speaka Professional

Speaka Professional 2342740 Manual de usuario

trubomat

trubomat GAB 1000 Manual de usuario

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manual de usuario

Rondish

Rondish UT-11 Manual de usuario

MG 10JRE Manual de usuario

Burkert

Burkert 8177 Manual de usuario

Firetide

Firetide HotPort 3203 Manual

Tele Radio

Tele Radio T9-02 Manual de usuario

Rotronic

Rotronic HygroFlex HF3 Series Manual de usuario

Jamara

Jamara FCX6 Pro Tel Manual de usuario