US Robotics Sportster Manual de usuario
This manual covers installation and operating instructions for the following U.S. Robotics modems:
Sportster®56 kbps∗internal and external modems
U.S. Robotics, the USRobotics logo, and Sportster are registered trademarks and Connections,
Total Control, Courier, RapidComm, x2, and the x2 logo are trademarks of 3Com Corporation and
its subsidiaries. Windows and Internet Explorer are registered trademarks of Microsoft Corp.
CompuServe is a registered trademark of CompuServe Inc. America Online is a registered trademark
of America Online Inc. Netscape Navigator is a trademark of Netscape Communications Corp. Any
other trademarks, trade names, or service marks used in this manual are the property of their
respective owners.
© 1997 3Com Corporation
7770 North Frontage Road
Skokie, IL 60077-2690
All Rights Reserved
∗∗ IMPORTANT! All x2 products are capable of 56 kbps downloads; however, due to FCC rules
which restrict power output of the service providers' modems, current download speeds are limited to
53 kbps. Actual speeds may vary depending on line conditions. Uploads from users to service
providers travel at speeds up to 28.8 kbps. An x2-capable modem, an x2-compatible analog phone
line and an x2-capable Internet Service Provider are necessary for these high-speed downloads.
Welcome to x2 Information Access 1
Product Features 3
Before You Begin (Windows 95 Users) 4
Internal Modem Installation with Windows 3.x 5
A Word about COM Ports and IRQs 5
How to Use ComTest to Determine Your Modem’s Settings 7
Testing an Installed Modem 9
What to Do with ComTest’s Recommendation 10
How to Change the Modem’s Settings 12
How to Insert the Modem into the Computer 14
Internal Modem Installation with Windows 95 21
Plug and Play Installation 21
How to Prepare for Plug and Play Installation 21
How to Insert the Modem into the Computer 23
How to Move Through the “New Hardware Found” Screens 27
External Modem Installation with Windows 3.x 31
How to Determine Which Serial Cable to Buy 31
How to Connect the Modem to the Computer 32
External Modem Installation with Windows 95 35
How to Determine Which Serial Cable to Buy 35
How to Connect the Modem to the Computer 36
Software Installation and Testing 43
Software Installation and Registration Using the Setup Wizard 43
Sending Your First Fax 58
Installing Other Fax/Data Software 61
Type of Modem 61
Initialization String 61
Flow Control 61
UART (External Modems Only) 62
Using Modem Station 63
Why Modem Station? 63
What Does Modem Station Do? 63
Installing Modem Station 63
Starting Modem Station 66
Using Detect New Modems 69
Using Terminal 70
Using Modem Configurator 73
Using Modem to Computer 76
Using the Extended Information Screens 80
U.S. Robotics Modem Update Wizard 89
Installation 89
Operation 94
Troubleshooting and Online Help Resources 101
Online Help Resources 107
Are You Still Having Problems? 111
If You Need to Return the Modem to Us 111
RapidComm Troubleshooting Tips 112
A Note to Users with Older Versions of RapidComm on Their Systems 113
Glossary 114
Technical Quick Reference 127
Front Panel Lights (External Modems) 128
Command Summary 129
DIP Switches (Modems with DIP Switches Only) 144
S-Registers 146
The Serial Interface 157
Regulatory Information 159
Manufacturer’s Declaration of Conformity 159
Caution to the User 160
IC (Canada) 160
UL Listing/CUL Listing 160
Connecting to the Telephone Company 161
Fax Branding 161
Radio and Television Interference 162
For Canadian Modem Users 163
Limited Warranty 166
Index 169
WELCOME TO X2INFORMATION ACCESS
1
Thelatest breakthrough in
onlinecommunications
Until now, 33.6 kbps was thought to be the
practical limit for speed over standard phone
lines. Now, x2™shatters that barrier, to bring
you download speeds of up to 56 kbps.
However, due to FCC rules which restrict
power output of your service provider’s
modems, current download speeds are limited
to 53 kbps. This modem is software
upgradable, allowing easy upgrades to new
features and enhancements as they become
available.
Anintegrated end-to-end
solutionfrom the leader
U.S. Robotics is well positioned to bring you
x2 technology. Our Sportster®modems are the
world's number one seller, and our Total
ControlTM and CourierTM product lines are
favored by many Internet service providers.
This widespread acceptance allows U.S.
Robotics to offer x2 technology to virtually
anyone.
WELCOMETOX2 INFORMATIONACCESS
2
Takingadvantage of the
moderntelephone network
x2 technology takes advantage of the typical
network configuration found when an analog
subscriber connects to a digitally connected
server. Because it requires no analog-to-digital
conversions in the downstream path (which
can cause line noise), x2 can use nearly all of
the available 64K network bandwidth.
(Upstream data, typically less speed sensitive,
travels at the standard V.34 rate.)
The result is a completely new kind of
transmission technique. Based on “encoding”
rather than “modulation,” it can give you
download speeds that you never thought
possible. What’s more, with standard V.42 bis
compression, x2 can download at speeds up
to a blistering 115.2 kbps.
Updatingx2 technology is
easyand FREE!
Read the section of this manual titled “U.S.
Robotics Modem Update Wizard” (page 85)
for information about using this software (on
the Connections™CD) to update your
modem’s code to the latest version.
Thenew standard for online
speed
U.S. Robotics has already submitted x2 to the
ITU-T standards committee for acceptance as
the next online standard. For more information
on U.S. Robotics’ x2 technology, see our
World Wide Web page at http://x2.usr.com.
PRODUCT FEATURES
3
Your new x2 modem
provides many advanced
features. Here are just a
few:
Modulation Schemes
x2 technology
ITU-T V.34+
ITU-T V.34
ITU-T V.32bis
ITU-T V.32
ITU-T V.22bis
ITU-T V.22
ITU-T V.23
Bell 212A
ITU-T V.21
Bell 103
Error Control and Data
Compression Schemes
ITU-T V.42
ITU-T V.42bis
MNP 2-5
Fax Modulation
Schemes
ITU-T V.17
ITU-T V.29
ITU-T V.27ter
ITU-T V.21
Fax Standards
EIA 578 Class 1 FAX
EIA 592 Class 2.0 FAX
Front Channel Link
Rates
33333, 37333, 41333, 42666,
44000, 45333, 46666, 48000,
49333, 50666, 52000, 53333,
54666, 56000, 57333
Back Channel Link
Rates
14400, 16800, 19200, 21600,
24000, 26400, 28800, 31200
V.34+ Link Rates
4800, 7200, 9600, 12000, 14400,
16800, 19200, 21600, 24000,
26400, 28800, 31200, 33600
V.32bis Link Rates
4800, 7200, 9600, 12000, 14400
Additional Link Rates
300, 1200/75 (V.23), 1200, 2400
Fax Link Rates
2400, 4800, 7200, 9600, 12000,
14400
BEFORE YOU BEGIN (WINDOWS 95 USERS)
4
Your Sportster modem is a Plug and Play
device. Windows 95 can automatically identify
a Plug and Play device and determine if your
system has the resources necessary to support
the device. However, Plug and Play will not
work if you do not have resources available or
if devices on your system are not reporting
resource usage correctly. Here’s how you can
verify that your system has the necessary
resources before installing the modem.
1. Click the Windows 95 Start button, point
to Settings, and then click Control Panel.
2. Double-click the System icon.
3. When the “System Properties” screen
appears, click the Device Manager tab.
4. Double-click Computer and the
“Computer Properties” screen appears.
Select the option at the top of the screen to
show Interrupt Requests (IRQs).
You will see the IRQs your system is currently
using. If IRQs 3, 4, 5, and 7 are being used,
you need to free an IRQ before you begin
installation. This process involves moving a
device from the IRQ you want to use to a
different (and unusually higher) IRQ setting.
Please read the documentation for (or contact
the manufacturer of) the device that is currently
using the IRQ you want to use for your modem
to learn more about what you should do to free
the IRQ for your modem.
INTERNALMODEMINSTALLATIONWITHWINDOWS3.X
5
You’ll need these items from your
Sportster modem box:
modem phone cord
Connections CD
Plus:
a screwdriver (not included)
AWord about COM Ports
and IRQs
Most computer accessories — a mouse,
sound card, enhanced graphics card, scanner,
etc. — require a special connection through
which they can communicate with the
computer. For some devices, this connection is
called a communications (or COM) port. Most
computers have 1 or 2 COM ports, but they
can have up to 4. Although internal modems
do not connect to COM ports directly, they do
require a COM port setting, which is
determined by the setting on the modem’s
COM jumper pins.
Each COM port uses an interrupt request
(IRQ). An accessory uses an IRQ to get the
attention of your computer’s central processing
unit (CPU) so that the accessory can perform
INTERNALMODEMINSTALLATIONWITHWINDOWS3.X
6
a task. The computer stops what it’s doing,
depending on the priority of the request, to
help the accessory perform its task. When two
accessories share an IRQ, it’s like two people
asking different questions in unison to a third
person. Just as the person being asked the two
questions cannot understand either request, a
computer can lock up or otherwise fail to
communicate properly with your modem when
there is an IRQ conflict.
DKEY POINT: Accessories cannot
share COM ports and should not share
IRQs. When accessories try to share
settings, they will either not work
properly or not work at all.This section
of the manual will help you understand
the COM/IRQ settings on your new
Sportster modem.
U.S. Robotics has set your modem to a default
Plug and Play setting geared towards
Windows 95 users. In this configuration, the
shunts used to set your modem’s COM port
and IRQ settings are hanging from single
jumper pins and will not affect your modem’s
settings. As a Windows 3.x user, you need to
run the ComTest program (on the
Connections CD) to determine what settings
your modem should use.
NOTE: Some communications
software programs require a particular
setting for your modem (RapidComm,
which shipped with your modem, does
not). If you wish to use a program other
than RapidComm, now is a goodtime to
read that software’s manual to
determine what setting is required.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Módem de US Robotics
US Robotics
US Robotics 002605-00 - Manual de usuario
US Robotics
US Robotics USR8550 Manual de usuario
US Robotics
US Robotics USR5686D Manual de usuario
US Robotics
US Robotics USR802972B-OEM Manual de usuario
US Robotics
US Robotics 000698-13 - Manual del propietario
US Robotics
US Robotics USR5699C Manual de usuario
US Robotics
US Robotics USR265633B Manual de usuario
US Robotics
US Robotics 005690-00 Manual de usuario
US Robotics
US Robotics Courier V.Everything x2 Addendum Manual de usuario
US Robotics
US Robotics SureConnect 9001 Manual de usuario
US Robotics
US Robotics 3CP5610 Manual de usuario
US Robotics
US Robotics Courier V.Everything 3CP3453 Guía de referencia
US Robotics
US Robotics 5686G Manual de usuario
US Robotics
US Robotics Courier USR3510 Manual de usuario
US Robotics
US Robotics 5630b Manual de usuario
US Robotics
US Robotics USR0756-CB Manual de usuario
US Robotics
US Robotics SureConnect 9000 Manual de usuario
US Robotics
US Robotics 005683-00 Manual de usuario
US Robotics
US Robotics ADSL Ethernet Modem Guía de instalación
US Robotics
US Robotics 002605-00 - Manual de usuario
