Unitronics Vision OPLC V130 Manual de usuario

Headquarters

Unitronics (1989) (R"G) Ltd.

Unitronics Building, Airport City

P.O.B. 300, Ben Gurion Airport, Israel 70100

Tel: + 972 (3) 977 8888 Fax: + 972 (3) 977 8877

From: Barak Illouz e-mail: Page:1Of:2Size: 141312 eSignature:1303-279-21(BI) Date Created: 1-Oct-09

File Name: Z:\HW\Doc\Mechanic\Replacing guide\Replacing a V130 Display.doc Date Printed: 1-Oct-09

Replacing a V130 Display

Before performing these actions, touch a grounded object to discharge

any electrostatic charge.

Avoid touching the PCB board directly. Hold the PCB board by its connectors.

Opening the Controller

1. Turn off the power supply, disconnect, and dismount the controller.

2. The back cover of the controller comprises 4 screws, located in the corners.

Remove the screws, and pull off the back cover.

3.

Hold the I/O PCB board by its top and bottom connectors and steadily pull

the board off.

4. Remove the plastic tabs marked X and Y.

5. Remove the keypad ribbon cable shown in the next figure.

Press the sides of the cable connector and pull it slightly upwards; this releases the cable.

Pull the cable from the connector.

Headquarters

Unitronics (1989) (R"G) Ltd.

Unitronics Building, Airport City

P.O.B. 300, Ben Gurion Airport, Israel 70100

Tel: + 972 (3) 977 8888 Fax: + 972 (3) 977 8877

From: Barak Illouz e-mail: Page:2Of:2Size: 141312 eSignature:1303-279-21(BI) Date Created: 1-Oct-09

File Name: Z:\HW\Doc\Mechanic\Replacing guide\Replacing a V130 Display.doc Date Printed: 1-Oct-09

6. Locate the two screws that fasten the CPU board to the controller and remove them.

7.

Hold the main board by Port 1 and by the I/O expansion port, and pull it out of

8. Locate the two screws that fasten the LCD display to the plastic panel and remove them.

9. Remove the LCD display.

Closing the Controller

1. Replace the new LCD display in the correct location, including the fastening screws.

2. Replace the CPU board, including the fastening screws.

3. Replace Keypad ribbon cable, and verify if the cable connectors are locked.

4. Replace the plastic tabs marked X and Y in the correct location.

5. Replace the I/O board.

6. Close the controller by snapping the plastic cover back in its place. If the card is

placed correctly, the cover will snap on easily.

7. Replace the screws in the corners of the back cover.

Otros manuales para Vision OPLC V130

1

Tabla de contenidos

Otros manuales de Controladores de Unitronics

Unitronics

Unitronics Vision OPLC V350-35-TR20 Manual de usuario

Unitronics

Unitronics Vision V130-33-R34 Manual de usuario

Unitronics

Unitronics Vision 230 Manual de usuario

Unitronics

Unitronics Uni-COM UAC-CB-01RS2 Manual de usuario

Unitronics

Unitronics UniStream USC-B5-TA32 Manual de usuario

Unitronics

Unitronics V130-33-TR6 Manual de usuario

Unitronics

Unitronics Jazz JZ10-11-R16L Manual de usuario

Unitronics

Unitronics UniStream USC-B3-R20 Manual de usuario

Unitronics

Unitronics UniStream USC-B5-R38 Manual de usuario

Unitronics

Unitronics M91-19-R1 Manual de usuario

Unitronics

Unitronics Samba OPLC SM43-J-R20 Manual de usuario

Unitronics

Unitronics Vision V130-TR6 Manual de usuario

Unitronics

Unitronics Jazz OPLC JZ20-T40 Manual de usuario

Unitronics

Unitronics Vision V350-35-TU24 Manual de usuario

Unitronics

Unitronics Vision OPLC V560-T25B Manual de usuario

Unitronics

Unitronics Vision V130-J Series Manual de usuario

Unitronics

Unitronics Vision700 Manual de usuario

Unitronics

Unitronics V120-22-R34 Manual de usuario

Unitronics

Unitronics Vision OPLC V130-33-T38 Manual de usuario

Unitronics

Unitronics Vision OPLC V1040-T20B Manual de usuario

Unitronics

Unitronics VisionV120-22-UN2 Manual de usuario

Unitronics

Unitronics Vision OPLC V130-33-T38 Manual de usuario

Unitronics

Unitronics Vision V130-T2 Manual de usuario

Unitronics

Unitronics Vision V350-35-T2 Manual de usuario

Manuales populares de Controladores de otras marcas

Digiplex

Digiplex DGP-848 Instrucciones de funcionamiento

YASKAWA

YASKAWA SGM series Manual de usuario

Sinope

Sinope Calypso RM3500ZB Manual de usuario

Isimet

Isimet DLA Series Style 2 Manual de instalación

LSIS

LSIS sv-ip5a Manual de usuario

Rockwell Automation

Rockwell Automation 1769-L31 Manual de usuario

Airflow

Airflow Uno hab Manual de usuario

ABB

ABB ACS580-01 drives Manual de usuario

Panasonic

Panasonic GM1 Series Manual de usuario

Emerson

Emerson SW93 Manual de usuario

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manual de usuario

Panasonic

Panasonic FP? Positioning Unit RTEX Manual de usuario

Samson

Samson Type 5824 Manual de servicio

Alpha IP

Alpha IP MIOB 21001 Manual de usuario

Siemens

Siemens OpenAir GMA 1 Series Manual de usuario

Surecom

Surecom SR-629 Manual de usuario

Fishman

Fishman TriplePlay Manual de usuario

Regulus

Regulus SRS1 T Manual de usuario